From: Harvey Harrison <harvey.harrison@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH 3/5] crypto: replace remaining __FUNCTION__ occurances
Date: Sun, 02 Mar 2008 17:37:57 -0800 [thread overview]
Message-ID: <1204508277.3266.6.camel@brick> (raw)
__FUNCTION_ is gcc specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
crypto/async_tx/async_memcpy.c | 6 +++---
crypto/async_tx/async_memset.c | 6 +++---
crypto/async_tx/async_tx.c | 6 +++---
crypto/async_tx/async_xor.c | 12 ++++++------
4 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/crypto/async_tx/async_memcpy.c b/crypto/async_tx/async_memcpy.c
index 0f62822..84caa4e 100644
--- a/crypto/async_tx/async_memcpy.c
+++ b/crypto/async_tx/async_memcpy.c
@@ -66,11 +66,11 @@ async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
}
if (tx) {
- pr_debug("%s: (async) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (async) len: %zu\n", __func__, len);
async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
} else {
void *dest_buf, *src_buf;
- pr_debug("%s: (sync) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (sync) len: %zu\n", __func__, len);
/* wait for any prerequisite operations */
if (depend_tx) {
@@ -80,7 +80,7 @@ async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
BUG_ON(depend_tx->ack);
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
- __FUNCTION__);
+ __func__);
}
dest_buf = kmap_atomic(dest, KM_USER0) + dest_offset;
diff --git a/crypto/async_tx/async_memset.c b/crypto/async_tx/async_memset.c
index 09c0e83..f5ff390 100644
--- a/crypto/async_tx/async_memset.c
+++ b/crypto/async_tx/async_memset.c
@@ -63,11 +63,11 @@ async_memset(struct page *dest, int val, unsigned int offset,
}
if (tx) {
- pr_debug("%s: (async) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (async) len: %zu\n", __func__, len);
async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
} else { /* run the memset synchronously */
void *dest_buf;
- pr_debug("%s: (sync) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (sync) len: %zu\n", __func__, len);
dest_buf = (void *) (((char *) page_address(dest)) + offset);
@@ -79,7 +79,7 @@ async_memset(struct page *dest, int val, unsigned int offset,
BUG_ON(depend_tx->ack);
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
- __FUNCTION__);
+ __func__);
}
memset(dest_buf, val, len);
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 5628821..2be3bae 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -472,11 +472,11 @@ async_trigger_callback(enum async_tx_flags flags,
tx = NULL;
if (tx) {
- pr_debug("%s: (async)\n", __FUNCTION__);
+ pr_debug("%s: (async)\n", __func__);
async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
} else {
- pr_debug("%s: (sync)\n", __FUNCTION__);
+ pr_debug("%s: (sync)\n", __func__);
/* wait for any prerequisite operations */
if (depend_tx) {
@@ -486,7 +486,7 @@ async_trigger_callback(enum async_tx_flags flags,
BUG_ON(depend_tx->ack);
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
- __FUNCTION__);
+ __func__);
}
async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 2259a4f..7a9db35 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -47,7 +47,7 @@ do_async_xor(struct dma_device *device,
int i;
unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
- pr_debug("%s: len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: len: %zu\n", __func__, len);
dma_dest = dma_map_page(device->dev, dest, offset, len,
DMA_FROM_DEVICE);
@@ -86,7 +86,7 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
void *_dest;
int i;
- pr_debug("%s: len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: len: %zu\n", __func__, len);
/* reuse the 'src_list' array to convert to buffer pointers */
for (i = 0; i < src_cnt; i++)
@@ -196,7 +196,7 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset,
DMA_ERROR)
panic("%s: DMA_ERROR waiting for "
"depend_tx\n",
- __FUNCTION__);
+ __func__);
}
do_sync_xor(dest, &src_list[src_off], offset,
@@ -276,7 +276,7 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
int i;
- pr_debug("%s: (async) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (async) len: %zu\n", __func__, len);
for (i = 0; i < src_cnt; i++)
dma_src[i] = dma_map_page(device->dev, src_list[i],
@@ -299,7 +299,7 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
} else {
unsigned long xor_flags = flags;
- pr_debug("%s: (sync) len: %zu\n", __FUNCTION__, len);
+ pr_debug("%s: (sync) len: %zu\n", __func__, len);
xor_flags |= ASYNC_TX_XOR_DROP_DST;
xor_flags &= ~ASYNC_TX_ACK;
@@ -310,7 +310,7 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
if (tx) {
if (dma_wait_for_async_tx(tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for tx\n",
- __FUNCTION__);
+ __func__);
async_tx_ack(tx);
}
--
1.5.4.3.409.g8811
reply other threads:[~2008-03-03 1:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1204508277.3266.6.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.