From: Harvey Harrison <harvey.harrison@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] mips: replace remaining __FUNCTION__ occurances
Date: Mon, 03 Mar 2008 10:32:40 -0800 [thread overview]
Message-ID: <1204569160.3266.29.camel@brick> (raw)
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
arch/mips/au1000/common/power.c | 2 +-
arch/mips/kernel/signal-common.h | 2 +-
arch/mips/pci/ops-pnx8550.c | 4 ++--
arch/mips/sgi-ip32/ip32-reset.c | 2 +-
.../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 2 +-
.../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 2 +-
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 54047d6..ca4b3de 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -47,7 +47,7 @@
#define DEBUG 1
#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
+# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
#else
# define DPRINTK(fmt, args...)
#endif
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index c0faabd..6c8e8c4 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -14,7 +14,7 @@
/* #define DEBUG_SIG */
#ifdef DEBUG_SIG
-# define DEBUGP(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ##args)
+# define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
#else
# define DEBUGP(fmt, args...)
#endif
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
index d610646..0e160d9 100644
--- a/arch/mips/pci/ops-pnx8550.c
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -90,14 +90,14 @@ config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int
loops--;
if (loops == 0) {
- printk("%s : Arbiter Locked.\n", __FUNCTION__);
+ printk("%s : Arbiter Locked.\n", __func__);
}
}
clear_status();
if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
- __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+ __func__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
pci_cmd);
}
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index 624bbdb..b6cab08 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -142,7 +142,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
printk(KERN_WARNING
- "%s: RTC IRQ without RTC_IRQF\n", __FUNCTION__);
+ "%s: RTC IRQ without RTC_IRQF\n", __func__);
}
/* Wait until interrupt goes away */
disable_irq(MACEISA_RTC_IRQ);
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index 3f808b6..6d31f2a 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -173,7 +173,7 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
{ \
char tmp[100]; \
sprintf( tmp, str ); \
- printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
+ printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
}
#else
#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...)
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index e466e5e..2203c77 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -93,7 +93,7 @@ static const u32 toshiba_rbtx4927_setup_debug_flag =
{ \
char tmp[100]; \
sprintf( tmp, str ); \
- printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
+ printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
}
#else
#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...)
--
1.5.4.3.500.g83a2c
reply other threads:[~2008-03-03 18:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1204569160.3266.29.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.