All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan Wu <cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
	i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Cc: Sonic Zhang <sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 1/7] Blackfin I2C/TWI driver: Add repeat start feature to avoid break of a bundle of i2c master xfer operation.
Date: Wed, 26 Mar 2008 17:46:43 -0700	[thread overview]
Message-ID: <1206578809-16038-2-git-send-email-cooloney@kernel.org> (raw)
In-Reply-To: <>

From: Sonic Zhang <sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>

 - Create a new mode TWI_I2C_MODE_REPEAT.
 - No change to smbus operation.

Signed-off-by: Sonic Zhang <sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Bryan Wu <cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/i2c/busses/i2c-bfin-twi.c |  189 +++++++++++++++++++++++--------------
 1 files changed, 116 insertions(+), 73 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 7dbdaeb..aedd8be 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -39,9 +39,10 @@
 #define POLL_TIMEOUT       (2 * HZ)
 
 /* SMBus mode*/
-#define TWI_I2C_MODE_STANDARD		0x01
-#define TWI_I2C_MODE_STANDARDSUB	0x02
-#define TWI_I2C_MODE_COMBINED		0x04
+#define TWI_I2C_MODE_STANDARD		1
+#define TWI_I2C_MODE_STANDARDSUB	2
+#define TWI_I2C_MODE_COMBINED		3	
+#define TWI_I2C_MODE_REPEAT		4
 
 struct bfin_twi_iface {
 	int			irq;
@@ -58,6 +59,9 @@ struct bfin_twi_iface {
 	struct timer_list	timeout_timer;
 	struct i2c_adapter	adap;
 	struct completion	complete;
+	struct i2c_msg 		*pmsg;
+	int			msg_num;
+	int			cur_msg;
 };
 
 static struct bfin_twi_iface twi_iface;
@@ -76,12 +80,16 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		/* start receive immediately after complete sending in
 		 * combine mode.
 		 */
-		else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+		else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
 			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
 				| MDIR | RSTART);
-		} else if (iface->manual_stop)
+		else if (iface->manual_stop)
 			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
 				| STOP);
+		else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg+1 < iface->msg_num)
+			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+				| RSTART);
 		SSYNC();
 		/* Clear status */
 		bfin_write_TWI_INT_STAT(XMTSERV);
@@ -108,6 +116,11 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
 				| STOP);
 			SSYNC();
+		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg+1 < iface->msg_num) {
+			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+				| RSTART);
+			SSYNC();
 		}
 		/* Clear interrupt source */
 		bfin_write_TWI_INT_STAT(RCVSERV);
@@ -119,7 +132,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		bfin_write_TWI_MASTER_STAT(0x3e);
 		bfin_write_TWI_MASTER_CTL(0);
 		SSYNC();
-		iface->result = -1;
+		iface->result = -EIO;
 		/* if both err and complete int stats are set, return proper
 		 * results.
 		 */
@@ -170,6 +183,42 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
 				MEN | MDIR);
 			SSYNC();
+		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg+1 < iface->msg_num) {
+			iface->cur_msg++;
+			iface->transPtr = iface->pmsg[iface->cur_msg].buf;
+			iface->writeNum = iface->readNum =
+				iface->pmsg[iface->cur_msg].len;
+			/* Set Transmit device address */
+			bfin_write_TWI_MASTER_ADDR(
+				iface->pmsg[iface->cur_msg].addr);
+			if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
+				iface->read_write = I2C_SMBUS_READ;
+			else {
+				iface->read_write = I2C_SMBUS_WRITE;
+				/* Transmit first data */
+				if (iface->writeNum > 0) {
+					bfin_write_TWI_XMT_DATA8(
+						*(iface->transPtr++));
+					iface->writeNum--;
+					SSYNC();
+				}
+			}
+
+			if (iface->pmsg[iface->cur_msg].len <= 255)
+				bfin_write_TWI_MASTER_CTL(
+				iface->pmsg[iface->cur_msg].len << 6);
+			else {
+				bfin_write_TWI_MASTER_CTL(0xff << 6);
+				iface->manual_stop = 1;
+			}
+			/* remove restart bit and enable master receive */
+			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
+				~RSTART);
+			bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
+				MEN | ((iface->read_write == I2C_SMBUS_READ) ?
+				MDIR : 0));
+			SSYNC();
 		} else {
 			iface->result = 1;
 			bfin_write_TWI_INT_MASK(0);
@@ -221,7 +270,6 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 {
 	struct bfin_twi_iface *iface = adap->algo_data;
 	struct i2c_msg *pmsg;
-	int i, ret;
 	int rc = 0;
 
 	if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
@@ -231,81 +279,76 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 		yield();
 	}
 
-	ret = 0;
-	for (i = 0; rc >= 0 && i < num; i++) {
-		pmsg = &msgs[i];
-		if (pmsg->flags & I2C_M_TEN) {
-			dev_err(&(adap->dev), "i2c-bfin-twi: 10 bits addr "
-				"not supported !\n");
-			rc = -EINVAL;
-			break;
-		}
+	iface->pmsg = msgs;
+	iface->msg_num = num;
+	iface->cur_msg = 0;
 
-		iface->cur_mode = TWI_I2C_MODE_STANDARD;
-		iface->manual_stop = 0;
-		iface->transPtr = pmsg->buf;
-		iface->writeNum = iface->readNum = pmsg->len;
-		iface->result = 0;
-		iface->timeout_count = 10;
-		/* Set Transmit device address */
-		bfin_write_TWI_MASTER_ADDR(pmsg->addr);
-
-		/* FIFO Initiation. Data in FIFO should be
-		 *  discarded before start a new operation.
-		 */
-		bfin_write_TWI_FIFO_CTL(0x3);
-		SSYNC();
-		bfin_write_TWI_FIFO_CTL(0);
-		SSYNC();
+	pmsg = &msgs[0];
+	if (pmsg->flags & I2C_M_TEN) {
+		dev_err(&adap->dev, "10 bits addr not supported!\n");
+		return -EINVAL;
+	}
 
-		if (pmsg->flags & I2C_M_RD)
-			iface->read_write = I2C_SMBUS_READ;
-		else {
-			iface->read_write = I2C_SMBUS_WRITE;
-			/* Transmit first data */
-			if (iface->writeNum > 0) {
-				bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
-				iface->writeNum--;
-				SSYNC();
-			}
+	iface->cur_mode = TWI_I2C_MODE_REPEAT;
+	iface->manual_stop = 0;
+	iface->transPtr = pmsg->buf;
+	iface->writeNum = iface->readNum = pmsg->len;
+	iface->result = 0;
+	iface->timeout_count = 10;
+	/* Set Transmit device address */
+	bfin_write_TWI_MASTER_ADDR(pmsg->addr);
+
+	/* FIFO Initiation. Data in FIFO should be
+	 *  discarded before start a new operation.
+	 */
+	bfin_write_TWI_FIFO_CTL(0x3);
+	SSYNC();
+	bfin_write_TWI_FIFO_CTL(0);
+	SSYNC();
+
+	if (pmsg->flags & I2C_M_RD)
+		iface->read_write = I2C_SMBUS_READ;
+	else {
+		iface->read_write = I2C_SMBUS_WRITE;
+		/* Transmit first data */
+		if (iface->writeNum > 0) {
+			bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+			iface->writeNum--;
+			SSYNC();
 		}
+	}
 
-		/* clear int stat */
-		bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
+	/* clear int stat */
+	bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
 
-		/* Interrupt mask . Enable XMT, RCV interrupt */
-		bfin_write_TWI_INT_MASK(MCOMP | MERR |
-			((iface->read_write == I2C_SMBUS_READ)?
-			RCVSERV : XMTSERV));
-		SSYNC();
+	/* Interrupt mask . Enable XMT, RCV interrupt */
+	bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
+	SSYNC();
 
-		if (pmsg->len > 0 && pmsg->len <= 255)
-			bfin_write_TWI_MASTER_CTL(pmsg->len << 6);
-		else if (pmsg->len > 255) {
-			bfin_write_TWI_MASTER_CTL(0xff << 6);
-			iface->manual_stop = 1;
-		} else
-			break;
+	if (pmsg->len <= 255)
+		bfin_write_TWI_MASTER_CTL(pmsg->len << 6);
+	else {
+		bfin_write_TWI_MASTER_CTL(0xff << 6);
+		iface->manual_stop = 1;
+	}
 
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
+	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+	add_timer(&iface->timeout_timer);
 
-		/* Master enable */
-		bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
-			((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
-			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
-		SSYNC();
+	/* Master enable */
+	bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+	SSYNC();
 
-		wait_for_completion(&iface->complete);
+	wait_for_completion(&iface->complete);
 
-		rc = iface->result;
-		if (rc == 1)
-			ret++;
-		else if (rc == -1)
-			break;
-	}
+	rc = iface->result;
 
-	return ret;
+	if (rc == 1)
+		return num;
+	else
+		return rc;
 }
 
 /*
-- 
1.5.4.3

_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

                 reply	other threads:[~2008-03-27  0:46 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1206578809-16038-2-git-send-email-cooloney@kernel.org \
    --to=cooloney-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    --cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
    --cc=sonic.zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.