From: Julien Rebetez <julien@fhtagn.net>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Yuan EC372S no frontend
Date: Mon, 07 Apr 2008 20:07:04 +0300 [thread overview]
Message-ID: <1207588024.14924.12.camel@silver-laptop> (raw)
[-- Attachment #1: Type: text/plain, Size: 420 bytes --]
Hello,
I have some problems with a Yuan EC372S card. I am using the latest (rev
7499:1abbd650fe07) v4l-dvb from mercurial head.
The card is correctly detected and the firmware loaded but no frontend
is attached to it.
I'm running kernel 2.6.22-14-generic on an Ubuntu Gutsy.
I have attached the relevant output of dmesg and lsusb -v and of course
I'll be glad to give more informations if needed.
Regards,
Julien
[-- Attachment #2: usb.txt --]
[-- Type: text/plain, Size: 3064 bytes --]
Bus 006 Device 004: ID 1164:1edc YUAN High-Tech Development Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1edc
bcdDevice 1.00
iManufacturer 1 YUANRD
iProduct 2 STK7700D
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 775 bytes --]
[ 6880.516000] dib0700: loaded with support for 7 different device-types
[ 6880.516000] dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
[ 6880.520000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 6880.624000] dib0700: firmware started successfully.
[ 6881.128000] dvb-usb: found a 'Yuan EC372S' in warm state.
[ 6881.128000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6881.128000] DVB: registering new adapter (Yuan EC372S)
[ 6881.220000] dvb-usb: no frontend was attached by 'Yuan EC372S'
[ 6881.220000] dvb-usb: Yuan EC372S successfully initialized and connected.
[ 6881.220000] dib0700: ir protocol setup failed
[ 6881.220000] usbcore: registered new interface driver dvb_usb_dib0700
[-- Attachment #4: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-04-07 17:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 17:07 Julien Rebetez [this message]
2008-04-07 21:14 ` [linux-dvb] Yuan EC372S no frontend Albert Comerma
2008-04-07 23:25 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1207588024.14924.12.camel@silver-laptop \
--to=julien@fhtagn.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.