From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.arm.linux.org.uk
Cc: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 1/17] ARM: OMAP2: Add new pin multiplexing configurations
Date: Wed, 9 Apr 2008 14:03:07 -0700 [thread overview]
Message-ID: <1207775003-7429-2-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1207775003-7429-1-git-send-email-tony@atomide.com>
Add new pin multiplexing configurations
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.c | 44 +++++++++++++++++++++++++++++++++++--
include/asm-arm/arch-omap/mux.h | 45 +++++++++++++++++++++++++++++++++++++-
2 files changed, 84 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 71cff46..5cba3a2 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -79,7 +79,12 @@ MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
+MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
+MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1)
+MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1)
+MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1)
+MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
@@ -104,9 +109,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
-/* TSC IRQ */
-MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
-
/* UART3 */
MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)
MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1)
@@ -169,6 +171,42 @@ MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1)
MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1)
MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1)
+/* 2430 USB */
+MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1)
+MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1)
+MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1)
+MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1)
+MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1)
+MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1)
+MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1)
+MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1)
+MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1)
+MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1)
+MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1)
+
+/* 2430 HS-USB */
+MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1)
+MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1)
+MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1)
+MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1)
+MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1)
+MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1)
+MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1)
+MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1)
+MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1)
+MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1)
+MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1)
+MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1)
+
+/* 2430 McBSP */
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1)
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1)
};
#ifdef CONFIG_ARCH_OMAP24XX
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 0edc6ce..68dd936 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -469,7 +469,12 @@ enum omap24xx_index {
AA8_242X_GPIO58,
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
+ N15_24XX_GPIO85,
M15_24XX_GPIO92,
+ P20_24XX_GPIO93,
+ P18_24XX_GPIO95,
+ M18_24XX_GPIO96,
+ L14_24XX_GPIO97,
J15_24XX_GPIO99,
V14_24XX_GPIO117,
P14_24XX_GPIO125,
@@ -494,8 +499,6 @@ enum omap24xx_index {
D3_242X_DMAREQ4,
E3_242X_DMAREQ5,
- P20_24XX_TSC_IRQ,
-
/* UART3 */
K15_24XX_UART3_TX,
K14_24XX_UART3_RX,
@@ -557,6 +560,44 @@ enum omap24xx_index {
B3__24XX_KBR5,
AA4_24XX_KBC2,
B13_24XX_KBC6,
+
+ /* 2430 USB */
+ AD9_2430_USB0_PUEN,
+ Y11_2430_USB0_VP,
+ AD7_2430_USB0_VM,
+ AE7_2430_USB0_RCV,
+ AD4_2430_USB0_TXEN,
+ AF9_2430_USB0_SE0,
+ AE6_2430_USB0_DAT,
+ AD24_2430_USB1_SE0,
+ AB24_2430_USB1_RCV,
+ Y25_2430_USB1_TXEN,
+ AA26_2430_USB1_DAT,
+
+ /* 2430 HS-USB */
+ AD9_2430_USB0HS_DATA3,
+ Y11_2430_USB0HS_DATA4,
+ AD7_2430_USB0HS_DATA5,
+ AE7_2430_USB0HS_DATA6,
+ AD4_2430_USB0HS_DATA2,
+ AF9_2430_USB0HS_DATA0,
+ AE6_2430_USB0HS_DATA1,
+ AE8_2430_USB0HS_CLK,
+ AD8_2430_USB0HS_DIR,
+ AE5_2430_USB0HS_STP,
+ AE9_2430_USB0HS_NXT,
+ AC7_2430_USB0HS_DATA7,
+
+ /* 2430 McBSP */
+ AC10_2430_MCBSP2_FSX,
+ AD16_2430_MCBSP2_CLX,
+ AE13_2430_MCBSP2_DX,
+ AD13_2430_MCBSP2_DR,
+ AC10_2430_MCBSP2_FSX_OFF,
+ AD16_2430_MCBSP2_CLX_OFF,
+ AE13_2430_MCBSP2_DX_OFF,
+ AD13_2430_MCBSP2_DR_OFF,
+
};
struct omap_mux_cfg {
--
1.5.3.6
next prev parent reply other threads:[~2008-04-09 21:03 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-09 21:03 [PATCH 0/17] omap2 patches for post 2.6.25, take #3 Tony Lindgren
2008-04-09 21:03 ` Tony Lindgren [this message]
2008-04-09 21:03 ` [PATCH 2/17] ARM: OMAP2: Clean-up mux code Tony Lindgren
2008-04-09 21:03 ` [PATCH 3/17] ARM: OMAP2: Add common register access for 24xx and 34xx Tony Lindgren
2008-04-09 21:03 ` [PATCH 4/17] ARM: OMAP2: Add register access for 34xx Tony Lindgren
2008-04-09 21:03 ` [PATCH 5/17] ARM: OMAP2: Change 24xx to use new register access Tony Lindgren
2008-04-09 21:03 ` [PATCH 6/17] ARM: OMAP2: Remove old 24xx PM code Tony Lindgren
2008-04-09 21:03 ` [PATCH 7/17] ARM: OMAP2: Move clock.h to clock24xx.h Tony Lindgren
2008-04-09 21:03 ` [PATCH 8/17] ARM: OMAP2: Move clock.c to clock24xx.c Tony Lindgren
2008-04-09 21:03 ` [PATCH 9/17] ARM: OMAP2: Add common clock framework for 24xx and 34xx Tony Lindgren
2008-04-09 21:03 ` [PATCH 10/17] ARM: OMAP2: Change 24xx to use shared clock code and new reg access Tony Lindgren
2008-04-09 21:03 ` [PATCH 11/17] ARM: OMAP: Add rest of 24xx clocks Tony Lindgren
2008-04-09 21:03 ` [PATCH 12/17] ARM: OMAP2: Remove old 24xx specific clock functions Tony Lindgren
2008-04-09 21:03 ` [PATCH 13/17] ARM: OMAP2: Clean up 24xx clock code Tony Lindgren
2008-04-09 21:03 ` [PATCH 14/17] ARM: OMAP2: Remove old PRCM register access code Tony Lindgren
2008-04-09 21:03 ` [PATCH 15/17] ARM: OMAP2: Add 34xx clocks Tony Lindgren
2008-04-09 21:03 ` [PATCH 16/17] ARM: OMAP2: Add 34xx clock code Tony Lindgren
2008-04-09 21:03 ` [PATCH 17/17] ARM: OMAP2: New DPLL clock framework Tony Lindgren
2008-04-09 22:01 ` [PATCH 5/17] ARM: OMAP2: Change 24xx to use new register access Tony Lindgren
2008-04-09 23:21 ` Tony Lindgren
2008-04-14 17:36 ` [PATCH 3/17] ARM: OMAP2: Add common register access for 24xx and 34xx Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2008-03-18 14:01 [PATCH 0/17] omap2 patches for post 2.6.25, take #2 Tony Lindgren
2008-03-18 14:01 ` [PATCH 1/17] ARM: OMAP2: Add new pin multiplexing configurations Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1207775003-7429-2-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.