From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m3TI7j4M029175 for ; Tue, 29 Apr 2008 14:07:45 -0400 Received: from rs25s12.datacenter.cha.cantv.net (rs25s12.datacenter.cha.cantv.net [200.44.33.35]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m3TI7XnG029727 for ; Tue, 29 Apr 2008 14:07:33 -0400 Received: from uqbar.local (dC9D2EDB6.dslam-15-9-46-07-1-01.alf.dsl.cantv.net [201.210.237.182]) by rs25s12.datacenter.cha.cantv.net (8.13.8/8.13.0/3.0) with ESMTP id m3TI7R7L019680 for ; Tue, 29 Apr 2008 13:37:27 -0430 Received: from uqbar.local (localhost.localdomain [127.0.0.1]) by uqbar.local (8.14.2/8.14.2/Debian-3) with ESMTP id m3TI7Vop018129 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Tue, 29 Apr 2008 13:37:31 -0430 Received: (from emilio@localhost) by uqbar.local (8.14.2/8.14.2/Submit) id m3TI7VTm018128 for video4linux-list@redhat.com; Tue, 29 Apr 2008 13:37:31 -0430 From: Emilio Lazo Zaia To: video4linux-list@redhat.com Content-Type: text/plain; charset=UTF-8 Date: Tue, 29 Apr 2008 13:37:30 -0430 Message-Id: <1209492450.16986.31.camel@localhost.localdomain> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: MCE TV Philips 7135 Cardbus don't work List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hello, I have purchased a "MCE TV Philips 7135 Cardbus" and I'm to set it up. When I plug it, the module saa7134 is being loaded and dmesg says: pccard: CardBus card inserted into slot 0 Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded PCI: Enabling device 0000:06:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 saa7133[0]: found at 0000:06:00.0, rev: 209, irq: 17, latency: 0, mmio: 0x54000000 PCI: Setting latency timer of device 0000:06:00.0 to 64 saa7133[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is e2c0c0 saa7133[0]: Huh, no eeprom present (err=-5)? saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 Since card is not detected, I've typed some little bash script to unload (rmmod) and load again saa7134 module with modprobe adding "card=n" parameter with n from 1 to 117 and execute tvtime each time module is being loaded with different card number (The tuner module I've not reloaded with different values). Note that a message of no EEPROM present is issued by saa7134 module! This is related specifically to the tuner? None of these 117 cards works in tv mode, some of these have not "Television" input facility, others have "Composite1", "Composite2", "S-Video" and some others have "TV (mono)" but in "Television" mode, almost in all cases a blue screen is showed. Here, the television norm is NTSC; I'm using Debian lenny with 2.6.24-amd64 kernel. Cardbus controller according to lspci is: 05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller and the output of "lspci -vv" regarding this TV card is: 06:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Philips Semiconductors Unknown device 0000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Facultad de Ciencias, UCV -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list