From: Liam Girdwood <lg@opensource.wolfsonmicro.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
arm kernel <linux-arm-kernel@lists.arm.linux.org.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 06/13] regulator: add support for fixed regulators.
Date: Fri, 02 May 2008 16:42:44 +0100 [thread overview]
Message-ID: <1209742964.12502.48.camel@odin> (raw)
This adds supports for regulators that are not software controllable. It allows
them to coexist in systems with mixed supplies.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
drivers/regulator/fixed.c | 129 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 129 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/fixed.c
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
new file mode 100644
index 0000000..68abafb
--- /dev/null
+++ b/drivers/regulator/fixed.c
@@ -0,0 +1,129 @@
+/*
+ * reg-fixed-voltage.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/regulator-drv.h>
+#include <linux/regulator/fixed-voltage.h>
+
+struct fixed_voltage_data {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+ int microvolts;
+};
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+ return 1;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+ return 0;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+ .is_enabled = fixed_voltage_is_enabled,
+ .enable = fixed_voltage_enable,
+ .get_voltage = fixed_voltage_get_voltage,
+};
+
+static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+{
+ struct fixed_voltage_config *config = pdev->dev.platform_data;
+ struct fixed_voltage_data *drvdata;
+ int ret;
+
+ drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ if (drvdata->desc.name == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.ops = &fixed_voltage_ops,
+
+ drvdata->microvolts = config->microvolts;
+
+ drvdata->dev = regulator_register(&drvdata->desc, drvdata);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ goto err_name;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+ drvdata->microvolts);
+
+ return 0;
+
+err_name:
+ kfree(drvdata->desc.name);
+err:
+ kfree(drvdata);
+ return ret;
+}
+
+static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+{
+ struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+ regulator_unregister(drvdata->dev);
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+ .probe = regulator_fixed_voltage_probe,
+ .remove = regulator_fixed_voltage_remove,
+ .driver = {
+ .name = "reg-fixed-voltage",
+ },
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+ return platform_driver_register(®ulator_fixed_voltage_driver);
+}
+module_init(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+ platform_driver_unregister(®ulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
--
1.5.4.3
reply other threads:[~2008-05-02 15:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1209742964.12502.48.camel@odin \
--to=lg@opensource.wolfsonmicro.com \
--cc=akpm@linux-foundation.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.