From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PATCH] SCSI bug fixes for 2.6.26-rc2
Date: Tue, 13 May 2008 12:20:09 -0500 [thread overview]
Message-ID: <1210699209.3077.38.camel@localhost.localdomain> (raw)
Just a small set of clear bug fixes (OK all but two of them are 2.6.25
regressions as well).
The patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short change log is:
James Bottomley (4):
aha152x: Fix oops on module removal
aha152x: fix init suspiciously returned 1, it should follow 0/-E conventio
gdth: fix Error: Driver 'gdth' is already registered, aborting...
gdth: fix timer handling
Jeremy Higdon (1):
qla1280: Fix queue depth problem
Mike Christie (2):
libiscsi regression in 2.6.25: fix setting of recv timer
libiscsi regression in 2.6.25: fix nop timer handling
The diffstat is:
aha152x.c | 8 ++++----
gdth.c | 51 ++++++++++++++++++++++++++++++++++-----------------
libiscsi.c | 29 +++++++++++++++--------------
qla1280.c | 4 ++--
4 files changed, 55 insertions(+), 37 deletions(-)
And the actual diff below.
James
---
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index f5215fd..1dca177 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -3830,7 +3830,7 @@ static int __init aha152x_init(void)
iounmap(p);
}
if (!ok && setup_count == 0)
- return 0;
+ return -ENODEV;
printk(KERN_INFO "aha152x: BIOS test: passed, ");
#else
@@ -3909,14 +3909,14 @@ static int __init aha152x_init(void)
#endif
}
- return 1;
+ return 0;
}
static void __exit aha152x_exit(void)
{
- struct aha152x_hostdata *hd;
+ struct aha152x_hostdata *hd, *tmp;
- list_for_each_entry(hd, &aha152x_host_list, host_list) {
+ list_for_each_entry_safe(hd, tmp, &aha152x_host_list, host_list) {
struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
aha152x_release(shost);
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 8e2e964..46771d4 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -550,7 +550,6 @@ static int __init gdth_search_isa(ulong32 bios_adr)
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static bool gdth_pci_registered;
static bool gdth_search_vortex(ushort device)
{
@@ -3724,6 +3723,8 @@ static void gdth_log_event(gdth_evt_data *dvr, char *buffer)
}
#ifdef GDTH_STATISTICS
+static unchar gdth_timer_running;
+
static void gdth_timeout(ulong data)
{
ulong32 i;
@@ -3731,7 +3732,10 @@ static void gdth_timeout(ulong data)
gdth_ha_str *ha;
ulong flags;
- BUG_ON(list_empty(&gdth_instances));
+ if(unlikely(list_empty(&gdth_instances))) {
+ gdth_timer_running = 0;
+ return;
+ }
ha = list_first_entry(&gdth_instances, gdth_ha_str, list);
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -3751,6 +3755,22 @@ static void gdth_timeout(ulong data)
add_timer(&gdth_timer);
spin_unlock_irqrestore(&ha->smp_lock, flags);
}
+
+static void gdth_timer_init(void)
+{
+ if (gdth_timer_running)
+ return;
+ gdth_timer_running = 1;
+ TRACE2(("gdth_detect(): Initializing timer !\n"));
+ gdth_timer.expires = jiffies + HZ;
+ gdth_timer.data = 0L;
+ gdth_timer.function = gdth_timeout;
+ add_timer(&gdth_timer);
+}
+#else
+static inline void gdth_timer_init(void)
+{
+}
#endif
static void __init internal_setup(char *str,int *ints)
@@ -4735,6 +4755,7 @@ static int __init gdth_isa_probe_one(ulong32 isa_bios)
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -4865,6 +4886,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot)
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5011,6 +5033,7 @@ static int gdth_pci_probe_one(gdth_pci_str *pcistr,
list_add_tail(&ha->list, &gdth_instances);
pci_set_drvdata(ha->pdev, ha);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5110,6 +5133,7 @@ static int __init gdth_init(void)
/* initializations */
gdth_polling = TRUE;
gdth_clear_events();
+ init_timer(&gdth_timer);
/* As default we do not probe for EISA or ISA controllers */
if (probe_eisa_isa) {
@@ -5132,23 +5156,17 @@ static int __init gdth_init(void)
#ifdef CONFIG_PCI
/* scanning for PCI controllers */
- if (pci_register_driver(&gdth_pci_driver) == 0)
- gdth_pci_registered = true;
+ if (pci_register_driver(&gdth_pci_driver)) {
+ gdth_ha_str *ha;
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_remove_one(ha);
+ return -ENODEV;
+ }
#endif /* CONFIG_PCI */
TRACE2(("gdth_detect() %d controller detected\n", gdth_ctr_count));
- if (list_empty(&gdth_instances))
- return -ENODEV;
-
-#ifdef GDTH_STATISTICS
- TRACE2(("gdth_detect(): Initializing timer !\n"));
- init_timer(&gdth_timer);
- gdth_timer.expires = jiffies + HZ;
- gdth_timer.data = 0L;
- gdth_timer.function = gdth_timeout;
- add_timer(&gdth_timer);
-#endif
major = register_chrdev(0,"gdth", &gdth_fops);
register_reboot_notifier(&gdth_notifier);
gdth_polling = FALSE;
@@ -5167,8 +5185,7 @@ static void __exit gdth_exit(void)
#endif
#ifdef CONFIG_PCI
- if (gdth_pci_registered)
- pci_unregister_driver(&gdth_pci_driver);
+ pci_unregister_driver(&gdth_pci_driver);
#endif
list_for_each_entry(ha, &gdth_instances, list)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 010c1b9..b43bf1d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -730,7 +730,9 @@ static int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
if (iscsi_recv_pdu(conn->cls_conn, hdr, data,
datalen))
rc = ISCSI_ERR_CONN_FAILED;
- }
+ } else
+ mod_timer(&conn->transport_timer,
+ jiffies + conn->recv_timeout);
iscsi_free_mgmt_task(conn, mtask);
break;
default:
@@ -1453,19 +1455,20 @@ static void iscsi_check_transport_timeouts(unsigned long data)
{
struct iscsi_conn *conn = (struct iscsi_conn *)data;
struct iscsi_session *session = conn->session;
- unsigned long timeout, next_timeout = 0, last_recv;
+ unsigned long recv_timeout, next_timeout = 0, last_recv;
spin_lock(&session->lock);
if (session->state != ISCSI_STATE_LOGGED_IN)
goto done;
- timeout = conn->recv_timeout;
- if (!timeout)
+ recv_timeout = conn->recv_timeout;
+ if (!recv_timeout)
goto done;
- timeout *= HZ;
+ recv_timeout *= HZ;
last_recv = conn->last_recv;
- if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ),
+ if (conn->ping_mtask &&
+ time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
jiffies)) {
iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
"expired, last rx %lu, last ping %lu, "
@@ -1476,15 +1479,13 @@ static void iscsi_check_transport_timeouts(unsigned long data)
return;
}
- if (time_before_eq(last_recv + timeout, jiffies)) {
- if (time_before_eq(conn->last_ping, last_recv)) {
- /* send a ping to try to provoke some traffic */
- debug_scsi("Sending nopout as ping on conn %p\n", conn);
- iscsi_send_nopout(conn, NULL);
- }
- next_timeout = last_recv + timeout + (conn->ping_timeout * HZ);
+ if (time_before_eq(last_recv + recv_timeout, jiffies)) {
+ /* send a ping to try to provoke some traffic */
+ debug_scsi("Sending nopout as ping on conn %p\n", conn);
+ iscsi_send_nopout(conn, NULL);
+ next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
} else
- next_timeout = last_recv + timeout;
+ next_timeout = last_recv + recv_timeout;
debug_scsi("Setting next tmo %lu\n", next_timeout);
mod_timer(&conn->transport_timer, next_timeout);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index fa06093..51e2f29 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2007,7 +2007,7 @@ qla1280_set_defaults(struct scsi_qla_host *ha)
nv->bus[bus].config_2.req_ack_active_negation = 1;
nv->bus[bus].config_2.data_line_active_negation = 1;
nv->bus[bus].selection_timeout = 250;
- nv->bus[bus].max_queue_depth = 256;
+ nv->bus[bus].max_queue_depth = 32;
if (IS_ISP1040(ha)) {
nv->bus[bus].bus_reset_delay = 3;
@@ -2051,7 +2051,7 @@ qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
status = qla1280_mailbox_command(ha, 0x0f, mb);
/* Save Tag queuing enable flag. */
- flag = (BIT_0 << target) & mb[0];
+ flag = (BIT_0 << target);
if (nv->bus[bus].target[target].parameter.tag_queuing)
ha->bus_settings[bus].qtag_enables |= flag;
next reply other threads:[~2008-05-13 17:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 17:20 James Bottomley [this message]
2008-05-13 17:54 ` [GIT PATCH] SCSI bug fixes for 2.6.26-rc2 Linus Torvalds
2008-05-13 18:04 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1210699209.3077.38.camel@localhost.localdomain \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.