From: Mingming Cao <cmm@us.ibm.com>
To: Jan Kara <jack@suse.cz>
Cc: akpm@linux-foundation.org, Badari Pulavarty <pbadari@us.ibm.com>,
linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] JBD: Fix DIO EIO error caused by race between free buffer and commit trasanction
Date: Mon, 19 May 2008 12:59:18 -0700 [thread overview]
Message-ID: <1211227158.3663.25.camel@localhost.localdomain> (raw)
In-Reply-To: <20080518223739.GB11006@atrey.karlin.mff.cuni.cz>
On Mon, 2008-05-19 at 00:37 +0200, Jan Kara wrote:
> Hi,
>
> > This patch fixed a few races between direct IO and kjournald commit
> > transaction. An unexpected EIO error gets returned to direct IO
> > caller when it failed to free those data buffers. This could be
> > reproduced easily with parallel direct write and buffered write to the
> > same file
> >
> > More specific, those races could cause journal_try_to_free_buffers()
> > fail to free the data buffers, when jbd is committing the transaction
> > that has those data buffers on its t_syncdata_list or t_locked_list.
> > journal_commit_transaction() still holds the reference to those
> > buffers before data reach to disk and buffers are removed from the
> > t_syncdata_list of t_locked_list. This prevent the concurrent
> > journal_try_to_free_buffers() to free those buffers at the same time,
> > but cause EIO error returns back to direct IO.
> >
> > With this patch, in case of direct IO and when try_to_free_buffers() failed,
> > let's waiting for journal_commit_transaction() to finish
> > flushing the current committing transaction's data buffers to disk,
> > then try to free those buffers again.
> If Andrew or Christoph wouldn't beat you for "inventive use" of
> gfp_mask, I'm fine with the patch as well ;). You can add
> Acked-by: Jan Kara <jack@suse.cz>
>
This is less intrusive way to fix this problem. The gfp_mask was marked
as unused in try_to_free_page(). I looked at filesystems in the kernel,
there is only a few defined releasepage() callback, and only xfs checks
the flag(but not used). btrfs is actually using it though. I thought
about the way you have suggested, i.e.clean up this gfp_mask and and
replace with a flag. I am not entirely sure if it we need to change the
address_space_operations and fix all the filesystems for this matter.
Andrew, what do you think? Is this approach acceptable?
Thanks and regards,
Mingming
> >
> > Signed-off-by: Mingming Cao <cmm@us.ibm.com>
> > Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
> > ---
> > fs/jbd/transaction.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++--
> > mm/truncate.c | 3 +-
> > 2 files changed, 57 insertions(+), 3 deletions(-)
> >
> > Index: linux-2.6.26-rc2/fs/jbd/transaction.c
> > ===================================================================
> > --- linux-2.6.26-rc2.orig/fs/jbd/transaction.c 2008-05-16 11:51:02.000000000 -0700
> > +++ linux-2.6.26-rc2/fs/jbd/transaction.c 2008-05-16 13:43:02.000000000 -0700
> > @@ -1648,12 +1648,39 @@ out:
> > return;
> > }
> >
> > +/*
> > + * journal_try_to_free_buffers() could race with journal_commit_transaction()
> > + * The later might still hold the reference count to the buffers when inspecting
> > + * them on t_syncdata_list or t_locked_list.
> > + *
> > + * Journal_try_to_free_buffers() will call this function to
> > + * wait for the current transaction to finish syncing data buffers, before
> > + * try to free that buffer.
> > + *
> > + * Called with journal->j_state_lock hold.
> > + */
> > +static void journal_wait_for_transaction_sync_data(journal_t *journal)
> > +{
> > + transaction_t *transaction = NULL;
> > + tid_t tid;
> > +
> > + transaction = journal->j_committing_transaction;
> > +
> > + if (!transaction)
> > + return;
> > +
> > + tid = transaction->t_tid;
> > + spin_unlock(&journal->j_state_lock);
> > + log_wait_commit(journal, tid);
> > + spin_lock(&journal->j_state_lock);
> > +}
> >
> > /**
> > * int journal_try_to_free_buffers() - try to free page buffers.
> > * @journal: journal for operation
> > * @page: to try and free
> > - * @unused_gfp_mask: unused
> > + * @gfp_mask: unused for allocation purpose. Here is used
> > + * as a flag to tell if direct IO is attemping to free buffers.
> > *
> > *
> > * For all the buffers on this page,
> > @@ -1682,9 +1709,11 @@ out:
> > * journal_try_to_free_buffer() is changing its state. But that
> > * cannot happen because we never reallocate freed data as metadata
> > * while the data is part of a transaction. Yes?
> > + *
> > + * Return 0 on failure, 1 on success
> > */
> > int journal_try_to_free_buffers(journal_t *journal,
> > - struct page *page, gfp_t unused_gfp_mask)
> > + struct page *page, gfp_t gfp_mask)
> > {
> > struct buffer_head *head;
> > struct buffer_head *bh;
> > @@ -1713,7 +1742,31 @@ int journal_try_to_free_buffers(journal_
> > if (buffer_jbd(bh))
> > goto busy;
> > } while ((bh = bh->b_this_page) != head);
> > +
> > ret = try_to_free_buffers(page);
> > +
> > + /*
> > + * In the case of concurrent direct IO and buffered IO,
> > + * There are a number of places where we
> > + * could race with journal_commit_transaction(), the later still
> > + * holds the reference to the buffers to free while processing them.
> > + * try_to_free_buffers() failed to free those buffers,
> > + * resulting in an unexpected EIO error
> > + * returns back to the generic_file_direct_IO()
> > + *
> > + * So let's wait for the current transaction to finish flush of
> > + * dirty data buffers before we try to free those buffers
> > + * again. This wait is needed by direct IO code path only,
> > + * gfp_mask __GFP_REPEAT is passed from the direct IO code
> > + * path to flag if we need to wait and retry free buffers.
> > + */
> > + if (ret == 0 && gfp_mask & __GFP_REPEAT) {
> > + spin_lock(&journal->j_state_lock);
> > + journal_wait_for_transaction_sync_data(journal);
> > + ret = try_to_free_buffers(page);
> > + spin_unlock(&journal->j_state_lock);
> > + }
> > +
> > busy:
> > return ret;
> > }
> > Index: linux-2.6.26-rc2/mm/truncate.c
> > ===================================================================
> > --- linux-2.6.26-rc2.orig/mm/truncate.c 2008-05-16 11:51:02.000000000 -0700
> > +++ linux-2.6.26-rc2/mm/truncate.c 2008-05-16 13:42:18.000000000 -0700
> > @@ -346,7 +346,8 @@ invalidate_complete_page2(struct address
> > if (page->mapping != mapping)
> > return 0;
> >
> > - if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
> > + if (PagePrivate(page) &&
> > + !try_to_release_page(page,GFP_KERNEL|__GFP_REPEAT))
> > return 0;
> >
> > write_lock_irq(&mapping->tree_lock);
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
>
> Honza
next prev parent reply other threads:[~2008-05-19 19:59 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-06 17:42 [RFC] JBD ordered mode rewrite Jan Kara
2008-03-06 19:05 ` Josef Bacik
2008-03-10 16:30 ` Jan Kara
2008-03-06 23:53 ` Andrew Morton
2008-03-10 17:38 ` Jan Kara
2008-03-07 1:34 ` Mark Fasheh
2008-03-10 18:00 ` Jan Kara
2008-03-07 10:55 ` Mingming Cao
2008-03-10 18:29 ` Jan Kara
2008-03-07 23:52 ` Andreas Dilger
2008-03-08 0:08 ` Mingming Cao
2008-03-08 12:14 ` Christoph Hellwig
2008-03-10 19:54 ` Jan Kara
2008-03-10 21:37 ` Andreas Dilger
2008-04-25 23:38 ` Possible race between direct IO and JBD? Mingming Cao
2008-04-26 10:41 ` Andrew Morton
2008-04-28 12:26 ` Jan Kara
2008-04-28 17:11 ` Badari Pulavarty
2008-04-28 18:09 ` Jan Kara
2008-04-28 19:09 ` Mingming Cao
2008-04-29 12:43 ` Jan Kara
2008-04-29 17:49 ` Mingming Cao
2008-05-01 15:16 ` [PATCH] jbd_commit_transaction() races with journal_try_to_drop_buffers() causing DIO failures Badari Pulavarty
2008-05-01 22:08 ` Mingming Cao
2008-05-05 17:06 ` Jan Kara
2008-05-05 17:53 ` Mingming Cao
2008-05-06 0:10 ` Badari Pulavarty
2008-05-09 22:27 ` Mingming Cao
2008-05-09 22:39 ` [PATCH] JBD:need hold j_state_lock to updates to transaction t_state to T_COMMIT Mingming Cao
2008-05-12 9:34 ` Jan Kara
2008-05-12 15:54 ` [PATCH] jbd_commit_transaction() races with journal_try_to_drop_buffers() causing DIO failures Jan Kara
2008-05-12 19:23 ` Mingming Cao
2008-05-13 14:20 ` Jan Kara
2008-05-13 0:39 ` Mingming Cao
2008-05-13 14:54 ` Jan Kara
2008-05-13 16:37 ` Mingming Cao
2008-05-13 22:23 ` Mingming Cao
2008-05-14 17:08 ` Jan Kara
2008-05-14 17:41 ` Mingming Cao
2008-05-14 18:14 ` Jan Kara
2008-05-16 14:13 ` Mingming Cao
2008-05-16 14:14 ` [PATCH] Fix DIO EIO error caused by race between jbd_commit_transaction() and journal_try_to_drop_buffers() Mingming Cao
2008-05-16 15:01 ` Josef Bacik
2008-05-16 17:11 ` Mingming Cao
2008-05-16 17:17 ` Badari Pulavarty
2008-05-16 17:30 ` Mingming Cao
2008-05-16 17:12 ` Badari Pulavarty
2008-05-16 21:01 ` [PATCH] JBD: Fix DIO EIO error caused by race between free buffer and commit trasanction Mingming Cao
2008-05-18 22:37 ` Jan Kara
2008-05-19 19:59 ` Mingming Cao [this message]
2008-05-19 20:25 ` Andrew Morton
2008-05-19 22:07 ` Mingming Cao
2008-05-20 9:30 ` Jens Axboe
2008-05-20 17:47 ` Mingming Cao
2008-05-20 18:02 ` [PATCH-v2] JBD: Fix " Mingming Cao
2008-05-20 23:53 ` Jan Kara
2008-05-21 17:14 ` Mingming
2008-05-24 22:44 ` Jan Kara
2008-05-28 18:18 ` Mingming Cao
2008-05-28 18:55 ` Jan Kara
2008-05-29 0:15 ` Mingming Cao
2008-05-29 0:16 ` [PATCH][take 5] " Mingming Cao
2008-05-29 0:18 ` [PATCH][take 5] JBD2: " Mingming Cao
2008-05-30 6:24 ` Aneesh Kumar K.V
2008-05-30 15:17 ` Mingming Cao
2008-05-21 23:38 ` [PATCH 1/2][TAKE3] JBD: " Mingming
2008-05-22 5:57 ` Andrew Morton
2008-05-21 23:39 ` [PATCH 2/2][TAKE3] JBD2: " Mingming
2008-05-20 18:03 ` [PATCH -v2] JBD2: Fix race between journal " Mingming Cao
2008-05-16 21:01 ` [PATCH] JBD2: Fix DIO EIO error caused by race between " Mingming Cao
2008-05-09 22:39 ` [PATCH] JBD2:need hold j_state_lock to updates to transaction t_state to T_COMMIT Mingming Cao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1211227158.3663.25.camel@localhost.localdomain \
--to=cmm@us.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbadari@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.