From: Alexey Fisher <bug-track-M18mAb7Tlt0yCq4wW13eYl6hYfS7NtTn@public.gmane.org>
To: kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: BUG: sleeping function called from invalid context at mm/slab.c:3052
Date: Sun, 01 Jun 2008 11:47:03 +0200 [thread overview]
Message-ID: <1212313623.5186.8.camel@zwerg> (raw)
[-- Attachment #1: Type: text/plain, Size: 2557 bytes --]
I get this after suspend on my PC (2.6.26-rc4-00103-g1beee8d). I do not
thing there is any reason to bisect it, supend on my PC began to work
only with 2.6.26-rc3:
[ 433.110546] BUG: sleeping function called from invalid context at
mm/slab.c:3052
[ 433.110550] in_atomic():1, irqs_disabled():0
[ 433.110554] 5 locks held by pm-suspend/4783:
[ 433.110556] #0: (&buffer->mutex){--..}, at: [<c01ac0b0>]
sysfs_write_file+0x24/0xe1
[ 433.110572] #1: (pm_mutex){--..}, at: [<c0147288>] enter_state
+0x15c/0x170
[ 433.110579] #2: (cpu_add_remove_lock){--..}, at: [<c0143138>]
disable_nonboot_cpus+0x8/0xc0
[ 433.110585] #3: (&cpu_hotplug.lock){--..}, at: [<c014308d>]
cpu_hotplug_begin+0x17/0x3e
[ 433.110590] #4: (smp_alt){--..}, at: [<c0106d9c>]
alternatives_smp_switch+0x14b/0x161
[ 433.110598] Pid: 4783, comm: pm-suspend Not tainted
2.6.26-rc4-testing-00103-g1beee8d #35
[ 433.110602] [<c0173715>] kmem_cache_alloc+0x26/0xf2
[ 433.110645] [<c016b443>] __get_vm_area_node+0x8b/0x194
[ 433.110652] [<c016b443>] __get_vm_area_node+0x8b/0x194
[ 433.110657] [<c013ef6c>] __lock_acquire+0xbfc/0xc18
[ 433.110662] [<c016b5c8>] get_vm_area_caller+0x3b/0x40
[ 433.110667] [<c03392c2>] text_poke+0xa8/0x153
[ 433.110673] [<c016ba7d>] vmap+0x1f/0x41
[ 433.110677] [<c03392c2>] text_poke+0xa8/0x153
[ 433.110682] [<c010141c>] sys_execve+0x38/0x4a
[ 433.110686] [<c013c0d6>] get_lock_stats+0x13/0x34
[ 433.110691] [<c0106b93>] alternatives_smp_unlock+0x40/0x4d
[ 433.110696] [<c0106d6a>] alternatives_smp_switch+0x119/0x161
[ 433.110700] [<c033c071>] _etext+0x0/0xf
[ 433.110705] [<c010e9f0>] __cpu_die+0x31/0x63
[ 433.110712] [<c03280fd>] _cpu_down+0x141/0x1ef
[ 433.110718] [<c0143177>] disable_nonboot_cpus+0x47/0xc0
[ 433.110723] [<c014705b>] suspend_devices_and_enter+0x92/0x13f
[ 433.110727] [<c0147243>] enter_state+0x117/0x170
[ 433.110732] [<c014732a>] state_store+0x8e/0xa4
[ 433.110736] [<c014729c>] state_store+0x0/0xa4
[ 433.110741] [<c01e5ef7>] kobj_attr_store+0x18/0x1c
[ 433.110746] [<c01ac140>] sysfs_write_file+0xb4/0xe1
[ 433.110751] [<c01ac08c>] sysfs_write_file+0x0/0xe1
[ 433.110755] [<c01767dd>] vfs_write+0x83/0xf6
[ 433.110760] [<c0176d01>] sys_write+0x3c/0x63
[ 433.110765] [<c0102ddf>] sysenter_past_esp+0x78/0xd1
[ 433.110771] =======================
[ 433.141990] CPU0 attaching NULL sched-domain.
[ 433.143290] CPU1 is down
Some time this PC won't wake up if it suspended (S3) with firefox
started. This time i wonted to find why, so may bit this is the reason.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 46344 bytes --]
[ 0.000000] Linux version 2.6.26-rc4-testing-00103-g1beee8d (lex@zwerg) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #35 SMP PREEMPT Sun Jun 1 11:16:46 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f790000 (usable)
[ 0.000000] BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f79e000 - 000000007f7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 522128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522128
[ 0.000000] On node 0 totalpages: 522128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2288 pages used for memmap
[ 0.000000] HighMem zone: 290464 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FA5D0, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 7F790100, 0054 (r1 NEC 6000701 MSFT 97)
[ 0.000000] ACPI: FACP 7F790290, 00F4 (r3 A_M_I_ OEMFACP 6000701 MSFT 97)
[ 0.000000] ACPI: DSDT 7F790590, 4BD8 (r1 A0281 A0281081 81 INTL 20060113)
[ 0.000000] ACPI: FACS 7F79E000, 0040
[ 0.000000] ACPI: APIC 7F790390, 0080 (r1 A_M_I_ OEMAPIC 6000701 MSFT 97)
[ 0.000000] ACPI: SLIC 7F790410, 0176 (r1 NEC 6000701 MSFT 97)
[ 0.000000] ACPI: OEMB 7F79E040, 006B (r1 A_M_I_ AMI_OEM 6000701 MSFT 97)
[ 0.000000] ACPI: HPET 7F795170, 0038 (r1 A_M_I_ OEMHPET 6000701 MSFT 97)
[ 0.000000] ACPI: MCFG 7F7951B0, 003C (r1 A_M_I_ OEMMCFG 6000701 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:80380000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 335620 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518048
[ 0.000000] Kernel command line: root=/dev/sda2 acpi_sleep=s3_bios,s3_mode ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3200.521 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000999] ... MAX_LOCK_DEPTH: 48
[ 0.000999] ... MAX_LOCKDEP_KEYS: 2048
[ 0.000999] ... CLASSHASH_SIZE: 1024
[ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.000999] ... CHAINHASH_SIZE: 8192
[ 0.000999] memory used by lock dependency info: 1024 kB
[ 0.000999] per task-struct memory footprint: 2688 bytes
[ 0.000999] ------------------------
[ 0.000999] | Locking API testsuite:
[ 0.000999] ----------------------------------------------------------------------------
[ 0.000999] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000999] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] recursive read-lock: | ok | | ok |
[ 0.000999] recursive read-lock #2: | ok | | ok |
[ 0.000999] mixed read-write-lock: | ok | | ok |
[ 0.000999] mixed write-read-lock: | ok | | ok |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] hard-irq read-recursion/123: ok |
[ 0.000999] soft-irq read-recursion/123: ok |
[ 0.000999] hard-irq read-recursion/132: ok |
[ 0.000999] soft-irq read-recursion/132: ok |
[ 0.000999] hard-irq read-recursion/213: ok |
[ 0.000999] soft-irq read-recursion/213: ok |
[ 0.000999] hard-irq read-recursion/231: ok |
[ 0.000999] soft-irq read-recursion/231: ok |
[ 0.000999] hard-irq read-recursion/312: ok |
[ 0.000999] soft-irq read-recursion/312: ok |
[ 0.000999] hard-irq read-recursion/321: ok |
[ 0.000999] soft-irq read-recursion/321: ok |
[ 0.000999] -------------------------------------------------------
[ 0.000999] Good, all 218 testcases passed! |
[ 0.000999] ---------------------------------
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 2062160k/2088512k available (2288k kernel code, 25252k reserved, 1313k data, 512k init, 1171008k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000999] .init : 0xc048b000 - 0xc050b000 ( 512 kB)
[ 0.000999] .data : 0xc033c071 - 0xc04845a8 (1313 kB)
[ 0.000999] .text : 0xc0100000 - 0xc033c071 (2288 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] CPA: page pool initialized 32 of 32 pages preallocated
[ 0.000999] hpet clockevent registered
[ 0.060739] Calibrating delay using timer specific routine.. 6410.85 BogoMIPS (lpj=3205429)
[ 0.060990] Security Framework initialized
[ 0.060990] Capability LSM initialized
[ 0.060990] Failure registering Root Plug module with the kernel
[ 0.060990] Failure registering Root Plug module with primary security module.
[ 0.060990] Mount-cache hash table entries: 512
[ 0.062498] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.062565] CPU: L2 cache: 2048K
[ 0.062605] CPU: Physical Processor ID: 0
[ 0.062647] Intel machine check architecture supported.
[ 0.062693] Intel machine check reporting enabled on CPU#0.
[ 0.062738] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.062785] CPU0: Thermal monitoring enabled
[ 0.062827] using mwait in idle threads.
[ 0.062890] Checking 'hlt' instruction... OK.
[ 0.068016] ACPI: Core revision 20080321
[ 0.087017] Parsing all Control Methods:
[ 0.088134] Table [DSDT](id 0001) - 676 Objects with 54 Devices 198 Methods 25 Regions
[ 0.088223] tbxface-0598 [02] tb_load_namespace : ACPI Tables successfully acquired
[ 0.089986] evxfevnt-0091 [02] enable : Transition to ACPI mode successful
[ 0.090276] ENABLING IO-APIC IRQs
[ 0.090552] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.100578] CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
[ 0.101984] lockdep: fixing up alternatives.
[ 0.101984] Booting processor 1/1 ip 6000
[ 0.112982] Initializing CPU#1
[ 0.112982] Calibrating delay using timer specific routine.. 8960.85 BogoMIPS (lpj=4480426)
[ 0.112982] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.112982] CPU: L2 cache: 2048K
[ 0.112982] CPU: Physical Processor ID: 0
[ 0.112982] Intel machine check architecture supported.
[ 0.112982] Intel machine check reporting enabled on CPU#1.
[ 0.112982] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.112982] CPU1: Thermal monitoring enabled
[ 0.112982] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.174543] CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
[ 0.174973] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.174979] Measured 368 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.174979] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 0.175072] Brought up 2 CPUs
[ 0.175118] Total of 2 processors activated (15371.71 BogoMIPS).
[ 0.175997] CPU0 attaching sched-domain:
[ 0.176002] domain 0: span 0-1
[ 0.176005] groups: 0 1
[ 0.176023] CPU1 attaching sched-domain:
[ 0.176027] domain 0: span 0-1
[ 0.176029] groups: 1 0
[ 0.177972] net_namespace: 708 bytes
[ 0.177972] Booting paravirtualized kernel on bare hardware
[ 0.178972] Time: 9:25:05 Date: 06/01/08
[ 0.179334] NET: Registered protocol family 16
[ 0.180972] No dock devices found.
[ 0.181972] ACPI: bus type pci registered
[ 0.182972] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
[ 0.182972] PCI: Using MMCONFIG for extended config space
[ 0.182972] PCI: Using configuration type 1 for base access
[ 0.182972] Setting up standard PCI resources
[ 0.206072] evgpeblk-0956 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
[ 0.206606] ACPI: EC: Look up EC in DSDT
[ 0.221584] Completing Region/Field/Buffer/Package initialization:................................................................................................................
[ 0.237976] Initialized 20/25 Regions 23/23 Fields 36/36 Buffers 33/34 Packages (685 nodes)
[ 0.238065] Initializing Device/Processor/Thermal objects by executing _INI methods:.
[ 0.238274] Executed 1 _INI methods requiring 0 _STA executions (examined 60 objects)
[ 0.247962] evgpeblk-1052 [03] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 0 Runtime GPEs in this block
[ 0.248165] ACPI: Interpreter enabled
[ 0.248165] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.248441] ACPI: Using IOAPIC for interrupt routing
[ 0.285410] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.287727] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.287790] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.289159] PCI: Transparent bridge - 0000:00:1e.0
[ 0.289159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.290519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.291158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.291609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.313126] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.313796] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.314126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 *14 15)
[ 0.315110] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.315777] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.316398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.317181] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.318087] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.319577] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 70, should be 6F [20080321]
[ 0.320577] ACPI: WMI: Mapper loaded
[ 0.320577] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.320577] pnp: PnP ACPI init
[ 0.320577] ACPI: bus type pnp registered
[ 0.337272] pnp: PnP ACPI: found 15 devices
[ 0.337272] ACPI: ACPI bus type pnp unregistered
[ 0.338272] SCSI subsystem initialized
[ 0.339272] libata version 3.00 loaded.
[ 0.339272] usbcore: registered new interface driver usbfs
[ 0.340271] usbcore: registered new interface driver hub
[ 0.340272] usbcore: registered new device driver usb
[ 0.342345] PCI: Using ACPI for IRQ routing
[ 0.348047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.348180] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.349694] Switched to high resolution mode on CPU 0
[ 0.350650] Switched to high resolution mode on CPU 1
[ 0.354807] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.354892] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.355618] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.355667] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.355716] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.355764] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.355814] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.355863] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.355912] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.355970] system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.356054] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.356089] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.356089] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.356089] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.356182] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.356231] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[ 0.356279] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.356327] system 00:0e: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.356384] system 00:0e: iomem range 0x0-0xffffffffffffffff could not be reserved
[ 0.391371] PCI: Bridge: 0000:00:1c.0
[ 0.391371] IO window: e000-efff
[ 0.391371] MEM window: disabled.
[ 0.391371] PREFETCH window: disabled.
[ 0.391371] PCI: Bridge: 0000:00:1c.1
[ 0.391371] IO window: d000-dfff
[ 0.391371] MEM window: 0xcff00000-0xcfffffff
[ 0.391371] PREFETCH window: disabled.
[ 0.391371] PCI: Bridge: 0000:00:1e.0
[ 0.391371] IO window: c000-cfff
[ 0.391371] MEM window: disabled.
[ 0.391371] PREFETCH window: disabled.
[ 0.391371] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.391435] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.391483] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.391566] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.391590] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.392377] NET: Registered protocol family 2
[ 0.410376] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.411375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.413371] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.422370] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.422370] TCP reno registered
[ 0.428377] NET: Registered protocol family 1
[ 0.429371] Machine check exception polling timer started.
[ 0.436371] Initializing RT-Tester: OK
[ 0.437402] audit: initializing netlink socket (disabled)
[ 0.437402] type=2000 audit(1212312304.433:1): initialized
[ 0.440881] highmem bounce pool size: 64 pages
[ 0.441882] VFS: Disk quotas dquot_6.5.1
[ 0.441882] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.443156] msgmni has been set to 1741 for ipc namespace c045be9c
[ 0.444153] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.444153] io scheduler noop registered
[ 0.444153] io scheduler cfq registered (default)
[ 0.444153] pci 0000:00:02.0: Boot video device
[ 0.445239] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.445239] assign_interrupt_mode Found MSI capability
[ 0.445239] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.445239] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.446179] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.446179] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.446179] assign_interrupt_mode Found MSI capability
[ 0.446179] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.447180] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.448352] input: Power Button (FF) as /class/input/input0
[ 0.448352] ACPI: Power Button (FF) [PWRF]
[ 0.449332] input: Power Button (CM) as /class/input/input1
[ 0.449332] ACPI: Power Button (CM) [PWRB]
[ 0.451700] ACPI: SSDT 7F79E0B0, 0208 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.452687] Parsing all Control Methods:
[ 0.452687] Table [SSDT](id 00EE) - 0 Objects with 0 Devices 0 Methods 0 Regions
[ 0.453701] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.453701] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.454907] ACPI: SSDT 7F79E2C0, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.455689] Parsing all Control Methods:
[ 0.455689] Table [SSDT](id 00F1) - 0 Objects with 0 Devices 0 Methods 0 Regions
[ 0.456931] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.457000] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.629929] Real Time Clock Driver v1.12ac
[ 0.630132] hpet_resources: 0xfed00000 is busy
[ 0.630936] Linux agpgart interface v0.103
[ 0.630936] agpgart: Detected an Intel 945G Chipset.
[ 0.631912] agpgart: Detected 7932K stolen memory.
[ 0.647908] agpgart: AGP aperture is 256M @ 0xd0000000
[ 0.648932] [drm] Initialized drm 1.1.0 20060810
[ 0.648932] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.648932] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.649918] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 0.650154] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 0.651282] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.653361] 00:0b: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.664473] brd: module loaded
[ 0.669514] loop: module loaded
[ 0.669514] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 0.669514] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.669514] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.669514] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 0.759452] eth0: (PCI Express:2.5GB/s:Width x1) 00:13:d4:63:0f:9e
[ 0.759452] eth0: Intel(R) PRO/1000 Network Connection
[ 0.759452] eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 0.760453] Driver 'sd' needs updating - please use bus_type methods
[ 0.760537] Driver 'sr' needs updating - please use bus_type methods
[ 0.762531] ata_piix 0000:00:1f.1: version 2.12
[ 0.762531] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.762531] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.762531] scsi0 : ata_piix
[ 0.763521] scsi1 : ata_piix
[ 0.774870] ata1: PATA max UDMA/100 cmd 0xa000 ctl 0x9800 bmdma 0x8800 irq 18
[ 0.774870] ata2: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8808 irq 18
[ 0.943201] ata1.01: ATAPI: HP DVD Writer 840b, FF66, max UDMA/33
[ 0.949440] ata1.01: configured for UDMA/33
[ 1.113402] scsi 0:0:1:0: CD-ROM HP DVD Writer 840b FF66 PQ: 0 ANSI: 5
[ 1.180982] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.180982] Uniform CD-ROM driver Revision: 3.20
[ 1.182960] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.182960] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.184006] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.184006] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.184289] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.184897] scsi2 : ata_piix
[ 1.184976] scsi3 : ata_piix
[ 1.185955] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 17
[ 1.185955] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 17
[ 1.340953] ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
[ 1.340953] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
[ 1.346953] ata3.00: configured for UDMA/133
[ 1.507990] scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 1.508697] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 1.508697] sd 2:0:0:0: [sda] Write Protect is off
[ 1.508697] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.508697] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.509435] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 1.509545] sd 2:0:0:0: [sda] Write Protect is off
[ 1.509588] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.509716] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.509807] sda: sda1 sda2 sda4 < sda5 sda6 >
[ 1.547755] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.548742] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.549745] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.549745] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.549745] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.551056] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.555042] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.555042] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 1.555042] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfeffc00
[ 1.564078] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.565052] usb usb1: configuration #1 chosen from 1 choice
[ 1.566054] hub 1-0:1.0: USB hub found
[ 1.566054] hub 1-0:1.0: 8 ports detected
[ 1.668079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.668079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.668079] usb usb1: Product: EHCI Host Controller
[ 1.668079] usb usb1: Manufacturer: Linux 2.6.26-rc4-testing-00103-g1beee8d ehci_hcd
[ 1.668079] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.668670] USB Universal Host Controller Interface driver v3.0
[ 1.668833] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.668934] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.668941] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.669360] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.669472] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007400
[ 1.670336] usb usb2: configuration #1 chosen from 1 choice
[ 1.670395] hub 2-0:1.0: USB hub found
[ 1.670510] hub 2-0:1.0: 2 ports detected
[ 1.773353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.773353] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.773353] usb usb2: Product: UHCI Host Controller
[ 1.773353] usb usb2: Manufacturer: Linux 2.6.26-rc4-testing-00103-g1beee8d uhci_hcd
[ 1.773353] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.773353] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.773353] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.773353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.773353] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.773353] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007800
[ 1.774344] usb usb3: configuration #1 chosen from 1 choice
[ 1.774344] hub 3-0:1.0: USB hub found
[ 1.774428] hub 3-0:1.0: 2 ports detected
[ 1.873392] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.876333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.876394] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.876449] usb usb3: Product: UHCI Host Controller
[ 1.876490] usb usb3: Manufacturer: Linux 2.6.26-rc4-testing-00103-g1beee8d uhci_hcd
[ 1.876545] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.876638] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.876731] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.876737] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.877363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.877363] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000
[ 1.878336] usb usb4: configuration #1 chosen from 1 choice
[ 1.878336] hub 4-0:1.0: USB hub found
[ 1.878336] hub 4-0:1.0: 2 ports detected
[ 1.979328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.979328] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.979399] usb usb4: Product: UHCI Host Controller
[ 1.979443] usb usb4: Manufacturer: Linux 2.6.26-rc4-testing-00103-g1beee8d uhci_hcd
[ 1.979498] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.979660] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 1.979754] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 1.979760] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.980463] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.980463] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008400
[ 1.981408] usb usb5: configuration #1 chosen from 1 choice
[ 1.981408] hub 5-0:1.0: USB hub found
[ 1.981408] hub 5-0:1.0: 2 ports detected
[ 1.993434] usb 1-2: configuration #1 chosen from 1 choice
[ 2.000427] usb 1-2: New USB device found, idVendor=13fe, idProduct=1f00
[ 2.000427] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.000427] usb 1-2: Product: DataTraveler 2.0
[ 2.000427] usb 1-2: Manufacturer: Kingston
[ 2.000427] usb 1-2: SerialNumber: 5B851100027C
[ 2.082403] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.082403] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.082471] usb usb5: Product: UHCI Host Controller
[ 2.082514] usb usb5: Manufacturer: Linux 2.6.26-rc4-testing-00103-g1beee8d uhci_hcd
[ 2.082570] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.464450] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.602483] usb 3-2: configuration #1 chosen from 1 choice
[ 2.641507] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e
[ 2.641507] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.641507] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 2.641507] usb 3-2: Manufacturer: Logitech
[ 2.642489] usbcore: registered new interface driver libusual
[ 2.642489] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.642548] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.644258] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.646024] mice: PS/2 mouse device common for all mice
[ 2.646024] i2c /dev entries driver
[ 2.647016] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.664001] input: AT Translated Set 2 keyboard as /class/input/input2
[ 2.669010] w83627ehf: Found W83627EHG chip at 0x290
[ 2.669155] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available
[ 2.671009] cpuidle: using governor ladder
[ 2.671009] cpuidle: using governor menu
[ 2.671691] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 2.671736] ALSA device list:
[ 2.671776] No soundcards found.
[ 2.674248] TCP cubic registered
[ 2.674291] Using IPI No-Shortcut mode
[ 2.675367] PM: Resume from partition /dev/sda6
[ 2.675367] PM: Checking hibernation image.
[ 2.675367] PM: Resume from disk failed.
[ 2.676024] Magic number: 12:400:423
[ 2.698238] kjournald starting. Commit interval 5 seconds
[ 2.697546] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.697546] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.707651] debug: unmapping init memory c048b000..c050b000
[ 12.735669] usbcore: registered new interface driver hiddev
[ 12.748929] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[ 12.769984] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 12.770180] usbcore: registered new interface driver usbhid
[ 12.770232] usbhid: v2.6:USB HID core driver
[ 12.799377] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 12.799543] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.114747] fuse init (API version 7.9)
[ 13.219949] Adding 1767108k swap on /dev/sda6. Priority:-1 extents:1 across:1767108k
[ 13.471261] EXT3 FS on sda2, internal journal
[ 14.379566] kjournald starting. Commit interval 5 seconds
[ 14.362023] EXT3 FS on sda1, internal journal
[ 14.362023] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.399567] kjournald starting. Commit interval 5 seconds
[ 14.400023] EXT3 FS on sda5, internal journal
[ 14.400023] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.953949] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.522658] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 17.716739] NET: Registered protocol family 10
[ 17.720347] lo: Disabled Privacy Extensions
[ 20.794804] NET: Registered protocol family 17
[ 24.497779] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.283878] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 26.283891] eth0: 10/100 speed: disabling TSO
[ 26.285022] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.770668] CPA self-test:
[ 30.772520] 4k 52224 large 173 gb 0 x 52397[c0000000-f7fff000] miss 0
[ 30.788891] 4k 201728 large 27 gb 0 x 201755[c0000000-f7fff000] miss 0
[ 30.798890] 4k 201728 large 27 gb 0 x 201755[c0000000-f7fff000] miss 0
[ 30.798890] ok.
[ 40.736093] eth0: no IPv6 routers present
[ 430.962464] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 432.248643] PM: Syncing filesystems ... done.
[ 432.251142] PM: Preparing system for mem sleep
[ 432.251642] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 432.264885] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 432.265213] PM: Entering mem sleep
[ 432.265213] Suspending console(s)
[ 432.833658] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 432.833662] eth0: 10/100 speed: disabling TSO
[ 432.833923] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 432.852683] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 432.853185] sd 2:0:0:0: [sda] Stopping disk
[ 432.854825] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 432.867391] ACPI handle has no context!
[ 432.869027] serial 00:0b: disabled
[ 432.931736] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 432.931750] ACPI handle has no context!
[ 432.943425] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 432.954429] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 432.954429] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 432.964668] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 432.964732] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 432.964794] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 432.964856] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 432.975521] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 432.975616] ACPI handle has no context!
[ 432.987151] ACPI: Preparing to enter system sleep state S3
[ 433.008431] Disabling non-boot CPUs ...
[ 433.008624] CPU0 attaching NULL sched-domain.
[ 433.008632] CPU1 attaching NULL sched-domain.
[ 433.010506] kvm: disabling virtualization on CPU1
[ 433.010506] Breaking affinity for irq 1
[ 433.010506] Breaking affinity for irq 18
[ 433.110530] CPU 1 is now offline
[ 433.110533] lockdep: fixing up alternatives.
[ 433.110540] SMP alternatives: switching to UP code
[ 433.110546] BUG: sleeping function called from invalid context at mm/slab.c:3052
[ 433.110550] in_atomic():1, irqs_disabled():0
[ 433.110554] 5 locks held by pm-suspend/4783:
[ 433.110556] #0: (&buffer->mutex){--..}, at: [<c01ac0b0>] sysfs_write_file+0x24/0xe1
[ 433.110572] #1: (pm_mutex){--..}, at: [<c0147288>] enter_state+0x15c/0x170
[ 433.110579] #2: (cpu_add_remove_lock){--..}, at: [<c0143138>] disable_nonboot_cpus+0x8/0xc0
[ 433.110585] #3: (&cpu_hotplug.lock){--..}, at: [<c014308d>] cpu_hotplug_begin+0x17/0x3e
[ 433.110590] #4: (smp_alt){--..}, at: [<c0106d9c>] alternatives_smp_switch+0x14b/0x161
[ 433.110598] Pid: 4783, comm: pm-suspend Not tainted 2.6.26-rc4-testing-00103-g1beee8d #35
[ 433.110602] [<c0173715>] kmem_cache_alloc+0x26/0xf2
[ 433.110645] [<c016b443>] __get_vm_area_node+0x8b/0x194
[ 433.110652] [<c016b443>] __get_vm_area_node+0x8b/0x194
[ 433.110657] [<c013ef6c>] __lock_acquire+0xbfc/0xc18
[ 433.110662] [<c016b5c8>] get_vm_area_caller+0x3b/0x40
[ 433.110667] [<c03392c2>] text_poke+0xa8/0x153
[ 433.110673] [<c016ba7d>] vmap+0x1f/0x41
[ 433.110677] [<c03392c2>] text_poke+0xa8/0x153
[ 433.110682] [<c010141c>] sys_execve+0x38/0x4a
[ 433.110686] [<c013c0d6>] get_lock_stats+0x13/0x34
[ 433.110691] [<c0106b93>] alternatives_smp_unlock+0x40/0x4d
[ 433.110696] [<c0106d6a>] alternatives_smp_switch+0x119/0x161
[ 433.110700] [<c033c071>] _etext+0x0/0xf
[ 433.110705] [<c010e9f0>] __cpu_die+0x31/0x63
[ 433.110712] [<c03280fd>] _cpu_down+0x141/0x1ef
[ 433.110718] [<c0143177>] disable_nonboot_cpus+0x47/0xc0
[ 433.110723] [<c014705b>] suspend_devices_and_enter+0x92/0x13f
[ 433.110727] [<c0147243>] enter_state+0x117/0x170
[ 433.110732] [<c014732a>] state_store+0x8e/0xa4
[ 433.110736] [<c014729c>] state_store+0x0/0xa4
[ 433.110741] [<c01e5ef7>] kobj_attr_store+0x18/0x1c
[ 433.110746] [<c01ac140>] sysfs_write_file+0xb4/0xe1
[ 433.110751] [<c01ac08c>] sysfs_write_file+0x0/0xe1
[ 433.110755] [<c01767dd>] vfs_write+0x83/0xf6
[ 433.110760] [<c0176d01>] sys_write+0x3c/0x63
[ 433.110765] [<c0102ddf>] sysenter_past_esp+0x78/0xd1
[ 433.110771] =======================
[ 433.141990] CPU0 attaching NULL sched-domain.
[ 433.143290] CPU1 is down
[ 433.143498] hwsleep-0324 [03] enter_sleep_state : Entering sleep state [S3]
[ 433.143498] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 433.143498] Intel machine check architecture supported.
[ 433.143498] Intel machine check reporting enabled on CPU#0.
[ 433.143498] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 433.143498] CPU0: Thermal monitoring enabled
[ 433.143498] Back to C!
[ 433.144004] Enabling non-boot CPUs ...
[ 433.150307] CPU0 attaching NULL sched-domain.
[ 433.151402] lockdep: fixing up alternatives.
[ 433.151409] SMP alternatives: switching to SMP code
[ 433.239329] Booting processor 1/1 ip 6000
[ 433.249496] Initializing CPU#1
[ 433.249496] Calibrating delay using timer specific routine.. 6400.86 BogoMIPS (lpj=3200433)
[ 433.249496] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 433.249496] CPU: L2 cache: 2048K
[ 433.249496] CPU: Physical Processor ID: 0
[ 433.249496] Intel machine check architecture supported.
[ 433.249496] Intel machine check reporting enabled on CPU#1.
[ 433.249496] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 433.249496] CPU1: Thermal monitoring enabled
[ 433.249496] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 433.311688] CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
[ 433.311737] kvm: enabling virtualization on CPU1
[ 433.311851] CPU0 attaching sched-domain:
[ 433.311862] domain 0: span 0-1
[ 433.311868] groups: 0 1
[ 433.311884] CPU1 attaching sched-domain:
[ 433.311890] domain 0: span 0-1
[ 433.311895] groups: 1 0
[ 433.424473] Switched to high resolution mode on CPU 1
[ 433.428475] CPU1 is up
[ 433.434963] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
[ 433.479758] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 433.479758] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 433.479758] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 433.518646] PM: Writing back config space on device 0000:00:1c.0 at offset f (was 60100, writing 6010b)
[ 433.518646] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
[ 433.518646] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 433.518646] PM: Writing back config space on device 0000:00:1c.1 at offset f (was 60200, writing 6020a)
[ 433.518646] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[ 433.518646] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 433.518646] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 433.518646] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 433.518646] usb usb2: root hub lost power or was reset
[ 433.518646] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 433.518646] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 433.518646] usb usb3: root hub lost power or was reset
[ 433.518646] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 433.518646] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 433.518646] usb usb4: root hub lost power or was reset
[ 433.518646] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 433.518646] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 433.518646] usb usb5: root hub lost power or was reset
[ 433.520647] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 433.520647] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 433.520647] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 433.520647] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 433.520647] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 433.545642] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 433.545642] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 433.567774] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 4, writing 10)
[ 433.567871] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 433.567883] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 433.641344] serial 00:0b: activated
[ 433.653757] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 433.656205] sd 2:0:0:0: [sda] Starting disk
[ 433.691936] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[ 433.691941] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 433.697560] ata1.01: configured for UDMA/33
[ 435.268597] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 435.268600] eth0: 10/100 speed: disabling TSO
[ 437.095902] ata3.00: configured for UDMA/133
[ 437.109485] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 437.109485] sd 2:0:0:0: [sda] Write Protect is off
[ 437.109485] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 437.109485] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 438.107592] usb 3-2: reset low speed USB device using uhci_hcd and address 2
[ 438.426553] PM: Finishing wakeup.
[ 438.426553] Restarting tasks ... done.
[ 439.961904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 441.669070] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 441.669079] eth0: 10/100 speed: disabling TSO
[ 441.669358] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 458.850823] eth0: no IPv6 routers present
next reply other threads:[~2008-06-01 9:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-01 9:47 Alexey Fisher [this message]
2008-06-01 11:54 ` BUG: sleeping function called from invalid context at mm/slab.c:3052 Rafael J. Wysocki
[not found] ` <200806011354.03808.rjw-KKrjLPT3xs0@public.gmane.org>
2008-06-03 10:02 ` Alexey Fisher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1212313623.5186.8.camel@zwerg \
--to=bug-track-m18mab7tlt0ycq4ww13eyl6hyfs7nttn@public.gmane.org \
--cc=kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.