All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sigmund Augdal <sigmund@snap.tv>
To: linux-dvb <linux-dvb@linuxtv.org>
Subject: [linux-dvb] [PATCH] experimental support for C-1501
Date: Wed, 04 Jun 2008 15:14:31 +0200	[thread overview]
Message-ID: <1212585271.32385.41.camel@pascal> (raw)

[-- Attachment #1: Type: text/plain, Size: 281 bytes --]

The following experimental patch adds support for the technotrend budget
C-1501 dvb-c card. The parameters used to configure the tda10023 demod
chip are largely determined experimentally, but works quite for me in my
initial tests.

Signed-Off-By: Sigmund Augdal <sigmund@snap.tv>

[-- Attachment #2: c-1501.patch --]
[-- Type: text/x-patch, Size: 2202 bytes --]

diff -r 6541620a09b7 linux/drivers/media/dvb/ttpci/budget-ci.c
--- a/linux/drivers/media/dvb/ttpci/budget-ci.c	Tue Jun 03 10:32:16 2008 -0300
+++ b/linux/drivers/media/dvb/ttpci/budget-ci.c	Wed Jun 04 15:03:45 2008 +0200
@@ -46,6 +46,8 @@
 #include "lnbp21.h"
 #include "bsbe1.h"
 #include "bsru6.h"
+#include "tda1002x.h"
+#include "tda827x.h"
 
 /*
  * Regarding DEBIADDR_IR:
@@ -1069,6 +1071,32 @@
 
 
 
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0xc,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xA511,
+};
+
+static u8 read_pwm(struct budget_ci *budget_ci)
+{
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
+	{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+	};
+
+	if ((i2c_transfer(&budget_ci->budget.i2c_adap, msg, 2) != 2)
+	    || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+
 static void frontend_init(struct budget_ci *budget_ci)
 {
 	switch (budget_ci->budget.dev->pci->subsystem_device) {
@@ -1138,6 +1166,17 @@
 		}
 
 		break;
+	case 0x101a: // TT Budget-C-1501 (philips tda10023/philips tda8274A)
+		budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach,
+							    &tda10023_config, &budget_ci->budget.i2c_adap, read_pwm(budget_ci));
+		if (budget_ci->budget.dvb_frontend) {
+			if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61,
+				       &budget_ci->budget.i2c_adap, 0) == NULL)
+				printk("%s: No tda827x found!\n", __FUNCTION__);
+			break;
+		}
+		break;
+         
 	}
 
 	if (budget_ci->budget.dvb_frontend == NULL) {
@@ -1226,6 +1265,7 @@
 MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T	 PCI", BUDGET_TT);
 MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
 MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
@@ -1234,6 +1274,7 @@
 	MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
 	MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
 	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
+	MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101A),
 	{
 	 .vendor = 0,
 	 }

[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-06-04 13:14 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-04 13:14 Sigmund Augdal [this message]
2008-06-04 13:58 ` [linux-dvb] [PATCH] experimental support for C-1501 Antti Palosaari
2008-06-04 14:37   ` Sigmund Augdal
2008-06-04 17:28     ` [linux-dvb] diseqc VP-1041 skystar hd2 joep
2008-06-09 17:06       ` joep
2008-06-05  9:10     ` [linux-dvb] [PATCH] experimental support for C-1501 Sigmund Augdal
2008-06-08 15:38       ` Oliver Endriss
2008-06-09  5:21         ` Arthur Konovalov
2008-06-09 10:00           ` Sigmund Augdal
2008-06-09 10:29             ` Arthur Konovalov
2008-06-14 20:07           ` Simon Baxter
2008-06-14 22:08             ` Arthur Konovalov
2008-06-17 18:51       ` Oliver Endriss
  -- strict thread matches above, loose matches on Subject: below --
2008-06-15 17:23 SG
2008-06-16  5:14 ` Arthur Konovalov
2008-06-16 12:40   ` Sigmund Augdal
     [not found]     ` <20080616142616.75F9C3BC99@waldorfmail.homeip.net>
2008-06-16 14:33       ` Sigmund Augdal
2008-06-16 17:42         ` SG
2008-06-16 18:07           ` SG
2008-06-16 18:20           ` SG
2008-06-17 13:13           ` Antti Palosaari
2008-06-16 18:54         ` Arthur Konovalov
2008-07-14  2:31           ` Simon Baxter
2008-07-14 16:56             ` Arthur Konovalov
2008-07-18  9:46               ` Simon Baxter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1212585271.32385.41.camel@pascal \
    --to=sigmund@snap.tv \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.