From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.adfinis.com ([212.103.64.13]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1K4gCf-0005gW-22 for linux-dvb@linuxtv.org; Fri, 06 Jun 2008 19:58:18 +0200 From: Nicolas Christener To: Dennis Noordsij In-Reply-To: <484950D4.7050600@movial.fi> References: <1212736555.4264.12.camel@oipunk.loozer.local> <4849016A.8050607@movial.fi> <1212763110.14191.12.camel@oipunk.loozer.local> <484950D4.7050600@movial.fi> Date: Fri, 06 Jun 2008 19:58:12 +0200 Message-Id: <1212775092.5123.12.camel@oipunk.loozer.local> Mime-Version: 1.0 Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Terratec Cinergy Piranha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hi Dennis, hello list Am Freitag, den 06.06.2008, 16:59 +0200 schrieb Dennis Noordsij: [...] > Ah, yes. Sorry forgot to mention one part. As you can tell from the log, > the default mode is DVB-H. > > use: modprobe sms1xxx default_mode=0 ah yep this does the trick :) Now I got the devices: [nicolas@oipunk:/dev/dvb]$ find . . ./adapter0 ./adapter0/frontend0 ./adapter0/dvr0 ./adapter0/demux0 and `dmesg' looks good too. Thanks very much! However there is something left and I'm not sure, if it is a driver issue. Most probably the driver is OK and I'm doing something wrong ;) As far as I know, I now need to create a channels.conf file for xine, mplayer... Thats what I did: [nicolas@oipunk:~/temp/tv/dvb-apps-9311c900f746/util/scan]$ ./scan dvb-t/ch-All scanning dvb-t/ch-All using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 482000000 0 5 9 1 1 3 0 [...] >>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! [...] ERROR: initial tuning failed dumping lists (0 services) Done. I hope this is not a stupid newbie problem, but until now I couldn't find a solution. I also tried the `w_scan' utility which couldn't find any channels either. I would very much appreciate any help. kind regards Nicolas _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb