All of lore.kernel.org
 help / color / mirror / Atom feed
From: Soeren Sonnenburg <kernel@nn7.de>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-usb-devel <linux-usb-devel@lists.sourceforge.net>
Subject: Re: 26-rc5+git hang on boot bluetooth hidd/hid_devices
Date: Mon, 09 Jun 2008 21:35:01 +0200	[thread overview]
Message-ID: <1213040101.15360.7.camel@localhost> (raw)
In-Reply-To: <1213035594.17870.6.camel@violet.holtmann.net>

On Mon, 2008-06-09 at 20:19 +0200, Marcel Holtmann wrote:
> Hi Soeren,
> 
> > > > updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on
> > > > boot when bluetooth is activated. The last message I see is starting
> > > > hidd/hid_devices. And well 2.6.24/25 boot.
> > > > 
> > > > Does anybody else observe this? Any ideas?
> > > 
> > > is HID2HCI switching utility on? Do you have a HID proxy adapter in your
> > > system? If yes, then it is actually an USB issue.
> > 
> > yes hid2hci is on as this system is a macbookpro that tends to forget
> > that it has internal bluetooth after resume (if resume even works)
> 
> then please disable hid2hci and see if it still has a problem and report
> this to the USB guys.

Indeed when I disable the call to hid2hci it boots through. While
booting I see another (unrelated?) oops (see below).

When I after booting call hid2hci in a terminal it simply hangs.


PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: STAC922x, Apple subsys_id=106b0200
BUG: unable to handle kernel paging request at f888c000
IP: [<f883b115>] :isight_firmware:isight_firmware_load+0x105/0x240
*pde = 37804067 *pte = 00000000 
Oops: 0000 [#1] PREEMPT SMP 
Modules linked in: snd_hda_intel snd_pcm_oss snd_mixer_oss i2c_i801 isight_firmware(+) snd_pcm snd_timer appletouch snd sky2 soundcore snd_page_alloc evdev

Pid: 964, comm: modprobe Not tainted (2.6.26-rc5-sonne #28)
EIP: 0060:[<f883b115>] EFLAGS: 00010207 CPU: 0
EIP is at isight_firmware_load+0x105/0x240 [isight_firmware]
EAX: f71e0f00 EBX: f888bff3 ECX: 00000009 EDX: f71e0f00
ESI: f888bfff EDI: f71e0f0c EBP: f7191d40 ESP: f7191cfc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 964, ti=f7190000 task=f707d390 task.ti=f7190000)
Stack: 00000040 000092fa 00000000 f71e0f00 00000032 0000012c 0000fa87 0000932c 
       f7b6c45c f7b6c400 00000032 f71e0f00 b48dffff f71f60e0 00000000 f7bd6400 
       f883b7e0 f7191d68 c03315dc 00000000 f7bd641c f7bd6494 f883b760 f7b6c400 
Call Trace:
 [<c03315dc>] ? usb_probe_interface+0xac/0x120
 [<c02e9b98>] ? driver_probe_device+0x88/0x1a0
 [<c01ceeab>] ? sysfs_create_dir+0x2b/0x50
 [<c02e9d29>] ? __driver_attach+0x79/0x80
 [<c02e94b3>] ? bus_for_each_dev+0x53/0x80
 [<c02e9a29>] ? driver_attach+0x19/0x20
 [<c02e9cb0>] ? __driver_attach+0x0/0x80
 [<c02e8e6f>] ? bus_add_driver+0x1bf/0x240
 [<c02e9ec9>] ? driver_register+0x69/0x150
 [<c0124c64>] ? try_to_wake_up+0x74/0x200
 [<c033188c>] ? usb_register_driver+0x7c/0x100
 [<f8843017>] ? isight_firmware_init+0x17/0x19 [isight_firmware]
 [<c0153965>] ? sys_init_module+0x115/0x1ca0
 [<c02002e5>] ? ext3_dirty_inode+0x55/0x80
 [<c0182300>] ? __kmalloc+0x0/0xe0
 [<c01032d1>] ? sysenter_past_esp+0x6a/0x91
 =======================
Code: b5 83 7d d4 32 bf 32 00 00 00 ba d0 00 00 00 89 de 0f 4e 7d d4 89 f8 89 7d e4 e8 f7 71 94 c7 89 f9 c1 e9 02 89 c2 89 45 e8 89 d7 <f3> a5 8b 4d e4 83 e1 03 74 02 f3 a4 8b 45 e0 b9 a0 00 00 00 8b 
EIP: [<f883b115>] isight_firmware_load+0x105/0x240 [isight_firmware] SS:ESP 0068:f7191cfc
---[ end trace 8ea9a3ecbcdbff55 ]---

Soeren

  reply	other threads:[~2008-06-09 19:35 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-09 12:52 26-rc5+git hang on boot bluetooth hidd/hid_devices Soeren Sonnenburg
2008-06-09 14:48 ` Marcel Holtmann
2008-06-09 16:38   ` Soeren Sonnenburg
2008-06-09 18:19     ` Marcel Holtmann
2008-06-09 19:35       ` Soeren Sonnenburg [this message]
2008-06-09 20:54         ` Justin Mattock
2008-06-12 12:19           ` Soeren Sonnenburg
2008-06-12 16:21             ` Justin Mattock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1213040101.15360.7.camel@localhost \
    --to=kernel@nn7.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.