From: Harvey Harrison <harvey.harrison@gmail.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: John Linville <linville@tuxdriver.com>,
linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCHv2 09/11] mac80211: tkip.c consolidate tkip IV writing in helper
Date: Wed, 11 Jun 2008 14:22:00 -0700 [thread overview]
Message-ID: <1213219320.5974.182.camel@brick> (raw)
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
net/mac80211/tkip.c | 25 ++++++++++++++-----------
net/mac80211/tkip.h | 4 ++--
net/mac80211/wpa.c | 8 +-------
3 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index a00cf1e..a8900e3 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -64,6 +64,15 @@ static u16 tkipS(u16 val)
return tkip_sbox[val & 0xff] ^ swab16(tkip_sbox[val >> 8]);
}
+static u8 *write_tkip_iv(u8 *pos, u16 iv16)
+{
+ *pos++ = iv16 >> 8;
+ *pos++ = ((iv16 >> 8) | 0x20) & 0x7f;
+ *pos++ = iv16 & 0xFF;
+ return pos;
+}
+
+
/*
* P1K := Phase1(TA, TK, TSC)
* TA = transmitter address (48 bits)
@@ -123,12 +132,9 @@ static void tkip_mixing_phase2(struct ieee80211_key *key, struct tkip_ctx *ctx,
ppk[4] += ror16(ppk[3], 1);
ppk[5] += ror16(ppk[4], 1);
- rc4key[0] = tsc_IV16 >> 8;
- rc4key[1] = ((tsc_IV16 >> 8) | 0x20) & 0x7f;
- rc4key[2] = tsc_IV16 & 0xFF;
- rc4key[3] = ((ppk[5] ^ get_unaligned_le16(tk)) >> 1) & 0xFF;
+ rc4key = write_tkip_iv(rc4key, tsc_IV16);
+ *rc4key++ = ((ppk[5] ^ get_unaligned_le16(tk)) >> 1) & 0xFF;
- rc4key += 4;
for (i = 0; i < 6; i++)
put_unaligned_le16(ppk[i], rc4key + 2 * i);
}
@@ -136,12 +142,9 @@ static void tkip_mixing_phase2(struct ieee80211_key *key, struct tkip_ctx *ctx,
/* Add TKIP IV and Ext. IV at @pos. @iv0, @iv1, and @iv2 are the first octets
* of the IV. Returns pointer to the octet following IVs (i.e., beginning of
* the packet payload). */
-u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key,
- u8 iv0, u8 iv1, u8 iv2)
+u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key, u16 iv16)
{
- *pos++ = iv0;
- *pos++ = iv1;
- *pos++ = iv2;
+ pos = write_tkip_iv(pos, iv16);
*pos++ = (key->conf.keyidx << 6) | (1 << 5) /* Ext IV */;
put_unaligned_le32(key->u.tkip.tx.iv32, pos);
return pos + 4;
@@ -213,7 +216,7 @@ void ieee80211_tkip_encrypt_data(struct crypto_blkcipher *tfm,
u8 rc4key[16];
ieee80211_tkip_gen_rc4key(key, ta, rc4key);
- pos = ieee80211_tkip_add_iv(pos, key, rc4key[0], rc4key[1], rc4key[2]);
+ pos = ieee80211_tkip_add_iv(pos, key, key->u.tkip.tx.iv16);
ieee80211_wep_encrypt_data(tfm, rc4key, 16, pos, payload_len);
}
diff --git a/net/mac80211/tkip.h b/net/mac80211/tkip.h
index b890427..d471438 100644
--- a/net/mac80211/tkip.h
+++ b/net/mac80211/tkip.h
@@ -13,8 +13,8 @@
#include <linux/crypto.h>
#include "key.h"
-u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key,
- u8 iv0, u8 iv1, u8 iv2);
+u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key, u16 iv16);
+
void ieee80211_tkip_encrypt_data(struct crypto_blkcipher *tfm,
struct ieee80211_key *key,
u8 *pos, size_t payload_len, u8 *ta);
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 9834cec..345e10e 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -198,14 +198,8 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
key->u.tkip.tx.iv32++;
if (tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) {
- hdr = (struct ieee80211_hdr *)skb->data;
-
/* hwaccel - with preallocated room for IV */
- ieee80211_tkip_add_iv(pos, key,
- (u8) (key->u.tkip.tx.iv16 >> 8),
- (u8) (((key->u.tkip.tx.iv16 >> 8) | 0x20) &
- 0x7f),
- (u8) key->u.tkip.tx.iv16);
+ ieee80211_tkip_add_iv(pos, key, key->u.tkip.tx.iv16);
info->control.hw_key = &tx->key->conf;
return 0;
--
1.5.6.rc2.261.ga8fbe
reply other threads:[~2008-06-11 21:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1213219320.5974.182.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.