From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from [213.161.191.158] (helo=patton.snap.tv) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1K8FmO-0000OU-8s for linux-dvb@linuxtv.org; Mon, 16 Jun 2008 16:33:56 +0200 From: Sigmund Augdal To: siestagomez@web.de In-Reply-To: <20080616142616.75F9C3BC99@waldorfmail.homeip.net> References: <20080615192300.90886244.SiestaGomez@web.de> <4855F6B0.8060507@gmail.com> <1213620050.6543.6.camel@pascal> <20080616142616.75F9C3BC99@waldorfmail.homeip.net> Date: Mon, 16 Jun 2008 16:33:52 +0200 Message-Id: <1213626832.6543.23.camel@pascal> Mime-Version: 1.0 Cc: linux-dvb Subject: Re: [linux-dvb] [PATCH] experimental support for C-1501 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: On Mon, 2008-06-16 at 16:26 +0200, siestagomez@web.de wrote: > Sigmund Augdal schrieb: > > > On Mon, 2008-06-16 at 08:14 +0300, Arthur Konovalov wrote: > >> SG wrote: > >> > The patch works quite well and nearly all channels seem to work. > >> > > >> > But when tuning to some radio channels I'll get this kernel message: > >> > > >> > saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer > >> > > >> > Also I'm not able to tune to 'transponder 386000000 6900000 0 3' which works > >> > smoothly when using Win32. > >> > > >> > initial transponder 386000000 6900000 0 3 > >> > >>> tune to: 386:M64:C:6900: > >> > WARNING: >>> tuning failed!!! > >> > >>> tune to: 386:M64:C:6900: (tuning failed) > >> > WARNING: >>> tuning failed!!! > >> > ERROR: initial tuning failed > >> > dumping lists (0 services) > >> > Done. > >> > >> Yes, I discovered too that tuning to frequency 386MHz has no lock. > >> VDR channels.conf: TV3:386000:C0M64:C:6875:703:803:0:0:1003:16:1:0 > >> > >> At same time, 394MHz (and others) works. > > Hi. > > > > Both transponders reported to not tune here has different symbolrates > > from what I used for my testing. Maybe this is relevant in some way. > > Could you please compare this with the channels that did tune to see if > > there is a pattern? > > > > About the i2c message, I get that every now and then here as well, but I > > have not seen any ill effect from it. I also see that on some other TT > > cards so I think that might be unrelated to the demod/tuner. > > > > Regards > > > > Sigmund Augdal > > The symbolrate is the same on all other working channels. > > Regarding the i2c message when watching video I'll get this only once but > when tuning to a radio channel my log gets flooded and it seems to hangup. How does radio or not make a difference? As far as I know the card is DVB only and should not care whether the tuned transponder contains radio or video or whatever. Could you send a list of transponders that work (with tuning parameters) and ones that doesn't? Regards Sigmund Augdal > > Martin > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb