From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vivek Berodhia In-Reply-To: <486F4C47.5030205@domain.hid> References: <1215251268.3029.13.camel@domain.hid> <486F4C47.5030205@domain.hid> Content-Type: multipart/mixed; boundary="=-XOl/kPHQvmN/nw/tBiFF" Date: Tue, 08 Jul 2008 16:12:14 +0530 Message-Id: <1215513734.22331.11.camel@domain.hid> Mime-Version: 1.0 Subject: Re: [Xenomai-help] Unhandled irq 33 List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: rpm@xenomai.org Cc: xenomai@xenomai.org --=-XOl/kPHQvmN/nw/tBiFF Content-Type: text/plain Content-Transfer-Encoding: 7bit I have applied the patch suggested by you as well as upgraded my xenomai to 2.4.4,but it's not working.My standard kernel without xenomai and ipipe is booting well. Point to be noted that it doesn't boot when IPIPE is enabled even if xenomai is disabled.A capture file is enclosed having captures of working and crashing kernels and .config file for working kernel. One important thing is that irq33 that is shown up during crash time is not related to irq33(0x21) alloted to geth driver as i have tried to boot the kernel with geth driver disabled,same error persisted. Thanks & Regards VIVEK BERODHIA On Sat, 2008-07-05 at 12:26 +0200, Philippe Gerum wrote: > Vivek Berodhia wrote: > > Dear All, > > > > Help me, > > I am facing a problem during booting with xenomai kernel "unhandled > > irq33". > > > > Kernel Configuration. > > > > ARCH= powerpc > > CROSS_COMPILE=gcc-6xx- > > target machine = mpc8323 > > > > following is serial port capture of problem..please help me.. > > > > Your software kit is obsolete. Upgrading to Xenomai 2.4.4 is strongly > recommended. At the very least, upgrade your I-pipe support to 2.1-04 first, and > in any case, enable CONFIG_DEBUG_BUGVERBOSE to get sensible backtraces. > > http://download.gna.org/adeos/patches/v2.6/powerpc/older/adeos-ipipe-2.6.24-powerpc-DENX-2.1-04.patch > > If the problem persists, switch off the Xenomai support from the kernel > configuration, then retry. If nothing improves, try disabling the I-pipe > support, basically booting a standard kernel. Please make sure to send us the > output of /proc/interrupts along with the kernel log when you get a bootable > config, so that we can try to figure out what went wrong with the previous ones. > > > > > TFTP from server 192.168.4.51; our IP address is 192.168.4.251 > > Filename 'uImage'. > > Load address: 0x200000 > > Loading: > > ################################################################# > > ################################################ > > done > > Bytes transferred = 1658616 (194ef8 hex) > > Using FSL UEC0 device > > TFTP from server 192.168.4.51; our IP address is 192.168.4.251 > > Filename 'my.dtb'. > > Load address: 0x400000 > > Loading: # > > done > > Bytes transferred = 8192 (2000 hex) > > ## Booting image at 00200000 ... > > Image Name: Linux-2.6.24.2 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1658552 Bytes = 1.6 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > Uncompressing Kernel Image ... OK > > Booting using the fdt at 0x400000 > > WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. > > Using MPC832x RDB machine description > > Linux version 2.6.24.2 (root@domain.hid) (gcc version 4.2.2) #1 > > Sat Jul 5 > > 11:10:57 IST 2008 > > console [udbg0] enabled > > setup_arch: bootmem > > mpc832x_rdb_setup_arch() > > Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware > > bus > > number: 0->0 > > arch: exit > > Zone PFN ranges: > > DMA 0 -> 16384 > > Normal 16384 -> 16384 > > Movable zone start PFN for each node > > early_node_map[1] active PFN ranges > > 0: 0 -> 16384 > > Built 1 zonelists in Zone order, mobility grouping on. Total > > pages: > > 16256 > > Kernel command line: nfsroot=192.168.4.51:/opt/eldk/nfs2 > > ip=192.168.4.251:192.168.4.51:192.168.4.254:255.255.255.0:Coral_Router:eth1:off root=0 > > IPIC (128 IRQ sources) at fdefb700 > > PID hash table entries: 256 (order: 8, 1024 bytes) > > clocksource: timebase mult[7800001] shift[22] registered > > I-pipe 2.1-00: pipeline enabled. > > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > Memory: 61120k/65536k available (3344k kernel code, 4356k > > reserved, 152k > > data, 238k bss, 148k init) > > SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, > > Nodes=1 > > Mount-cache hash table entries: 512 > > device-tree: Duplicate name in /, renamed to "chosen#1" > > net_namespace: 64 bytes > > NET: Registered protocol family 16 > > > > PCI: Probing PCI hardware > > SCSI subsystem initialized > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > Time: timebase clocksource has been installed. > > NET: Registered protocol family 2 > > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > > TCP established hash table entries: 2048 (order: 2, 16384 bytes) > > TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > > TCP: Hash tables configured (established 2048 bind 2048) > > TCP reno registered > > I-pipe: Domain Xenomai registered. > > Xenomai: hal/powerpc started. > > Xenomai: real-time nucleus v2.4.2 (One Big Rush) loaded. > > Xenomai: starting native API services. > > Xenomai: starting POSIX services. > > Xenomai: starting RTDM services. > > io scheduler noop registered > > io scheduler anticipatory registered (default) > > io scheduler deadline registered > > io scheduler cfq registered > > Generic RTC Driver v1.07 > > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > > disabled > > serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 18) is a 16550A > > console handover: boot [udbg0] -> real [ttyS0] > > serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 19) is a 16550A > > RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 > > blocksize > > loop: module loaded > > Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 > > Copyright (c) 1999-2006 Intel Corporation. > > UCC Ethernet Controller MII Bus: probed > > ucc_geth: QE UCC Gigabit Ethernet Controller > > Driver 'sd' needs updating - please use bus_type methods > > mpc83xx_spi.1: MPC83xx SPI Controller driver at 0xc50084c0 (irq > > = 20) > > usbmon: debugfs is not available > > Initializing USB Mass Storage driver... > > usbcore: registered new interface driver usb-storage > > USB Mass Storage support registered. > > i2c /dev entries driver > > WDT driver for MPC83xx initialized. mode:reset timeout=65535 (32 > > seconds) > > mmc_spi spi1216.0: SD/MMC host mmc0, no DMA, no WP, no poweroff > > TCP cubic registered > > irq 33, desc: c034cf04, depth: 0, count: 0, unhandled: 0 > > irq 33, desc: c034cf04, depth: 0, count: 0, unhandled: 0 > > ->handle_irq(): c0019c0c, ->chip(): c03ae368, ->action(): > > 00000000 > > IRQ_LEVEL set > > IRQ_NOPROBE set > > IRQ_NOREQUEST set > > illegal vector 33 received! > > ------------[ cut here ]------------ > > Kernel BUG at c00504b0 [verbose debug info unavailable] > > Oops: Exception in kernel mode, sig: 5 [#1] > > MPC832x RDB > > Modules linked in: > > NIP: c00504b0 LR: c00504b0 CTR: c01a0c04 > > REGS: c3935a30 TRAP: 0700 Not tainted (2.6.24.2) > > MSR: 00021032 CR: 24222024 XER: 00000000 > > TASK = c385c7a0[761] 'mpc83xx_spi.1' THREAD: c3934000 > > GPR00: c00504b0 c3935ae0 c385c7a0 0000001f 00001267 ffffffff > > c01a30f0 > > 00004000 > > GPR08: 00000001 c0354f70 00000003 c0350000 44222022 fffffd7f > > 03ffd000 > > 00800000 > > GPR16: ffffffff 80000000 c0370000 c0370000 c0380d20 c0380d44 > > c0380d40 > > fffffffd > > GPR24: 00000000 c0369b04 000004a0 00000420 c0385484 00000021 > > c02db248 > > c034cf04 > > Call Trace: > > [c3935ae0] [c00504b0] (unreliable) > > [c3935b00] [c00515e8] > > [c3935b10] [c00094e4] > > [c3935b20] [c0009820] > > [c3935b50] [c0009a98] > > [c3935b60] [c0011630] > > --- Exception: 501[c3935c20] [0000114a] (unreliable) > > [c3935c70] [c0053a74] > > [c3935c80] [c0028108] > > [c3935d00] [c0028328] > > [c3935d50] [c00503c8] > > [c3935d70] [c00515e8] > > [c3935d80] [c00094e4] > > [c3935d90] [c0009820] > > [c3935dc0] [c0009a98] > > [c3935dd0] [c0011630] > > --- Exception: 501[c3935e90] [fffffd7f] (unreliable) > > [c3935ea0] [c02a8a7c] > > [c3935ee0] [c01e0200] > > [c3935f00] [c01dfbec] > > [c3935f50] [c0039e0c] > > [c3935f90] [c003a0f8] > > [c3935fd0] [c003e738] > > [c3935ff0] [c0010b1c] > > Instruction dump: > > 3d20c037 57ab103a 392954d8 3c60c02e 7d6b4a14 7fa4eb78 396b0040 > > 3863b2f8 > > 812b0008 39290001 912b0008 4bfd7de1 <0fe00000> 48000000 3c80c02e > > 7fc3f378 > > ---[ end trace e55df3d7b6b0ab0d ]--- > > > > > > > > _______________________________________________ > > Xenomai-help mailing list > > Xenomai-help@domain.hid > > https://mail.gna.org/listinfo/xenomai-help > > > > --=-XOl/kPHQvmN/nw/tBiFF Content-Disposition: attachment; filename=capture Content-Type: text/plain; name=capture; charset=utf-8 Content-Transfer-Encoding: 7bit capture of working kernel without CONFIG_IPIPE and CONFIG_XENOMAI U-Boot 1.1.6 (Mar 13 2008 - 18:37:35) MPC83XX Clock configuration: Coherent System Bus: 133 MHz Core: 333 MHz QE: 200 MHz BRG: 100 MHz Local Bus Controller: 133 MHz Local Bus: 66 MHz DDR: 266 MHz SEC: 133 MHz I2C1: 133 MHz CPU: MPC8323E, Rev: 11 at 333.333 MHz Board: Freescale MPC8323ERDB I2C: ready DRAM: DDR RAM: 64 MB FLASH: 16 MB PCI clock is 66MHz In: serial Out: serial Err: serial Net: UEC: PHY is Generic MII (2430d80) FSL UEC0: Full Duplex FSL UEC0: Speed 100BT FSL UEC0: Link is up UEC: PHY is Generic MII (2430d80) FSL UEC1: Full Duplex FSL UEC1: Speed 100BT FSL UEC1: Link is up FSL UEC0, FSL UEC1 Hit any key to stop autoboot: 0 Coral Router> run nfsboot Using FSL UEC0 device TFTP from server 192.168.4.51; our IP address is 192.168.4.251 Filename 'uImage'. Load address: 0x200000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 1547127 (179b77 hex) Using FSL UEC0 device TFTP from server 192.168.4.51; our IP address is 192.168.4.251 Filename 'my0.dtb'. Load address: 0x400000 Loading: ## done Bytes transferred = 6251 (186b hex) ## Booting image at 00200000 ... Image Name: Linux-2.6.24Coral_Router_1.0.0 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1547063 Bytes = 1.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using flat device tree at 0x400000 Using MPC832x RDB machine description Linux version 2.6.24Coral_Router_1.0.0 (root@domain.hid) (gcc version 4.2.2) #7 Tue Jul 8 15:44:46 IST 2008 console [udbg0] enabled setup_arch: bootmem mpc832x_rdb_setup_arch() Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0 arch: exit Zone PFN ranges: DMA 0 -> 16384 Normal 16384 -> 16384 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 16384 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: root=/dev/nfs rw nfsroot=192.168.4.51:/opt/eldk/nfs2 ip=192.168.4.251:192.168.4.51::::eth0:off console=ttyS0,115200 IPIC (128 IRQ sources) at fdefb700 PID hash table entries: 256 (order: 8, 1024 bytes) clocksource: timebase mult[7800001] shift[22] registered Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 61552k/65536k available (3080k kernel code, 3924k reserved, 136k data, 94k bss, 148k init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 net_namespace: 64 bytes NET: Registered protocol family 16 PCI: Probing PCI hardware SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Time: timebase clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 18) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 19) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. UCC Ethernet Controller MII Bus: probed ucc_geth: QE UCC Gigabit Ethernet Controller ucc_geth: UCC2 at 0xe0103000 (irq = 21) ucc_geth: UCC3 at 0xe0102200 (irq = 34) Driver 'sd' needs updating - please use bus_type methods mpc83xx_spi.1: MPC83xx SPI Controller driver at 0xc50084c0 (irq = 20) usbmon: debugfs is not available Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i2c /dev entries driver WDT driver for MPC83xx initialized. mode:reset timeout=65535 (32 seconds) mmc_spi spi1216.0: SD/MMC host mmc0, no DMA, no WP, no poweroff CPU0 16: 0 IPIC Level i2c-mpc 18: 183 IPIC Level serial 20: 341 QEIC Level mpc83xx_spi 21: 22595 QEIC Level UCC Geth BAD: 0 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -bash-3.2# capture for kernel with IPIPE enable irrespective of choice of CONFIG_XENOMAI -disabled or enabled U-Boot 1.1.6 (Mar 13 2008 - 18:37:35) MPC83XX Clock configuration: Coherent System Bus: 133 MHz Core: 333 MHz QE: 200 MHz BRG: 100 MHz Local Bus Controller: 133 MHz Local Bus: 66 MHz DDR: 266 MHz SEC: 133 MHz I2C1: 133 MHz CPU: MPC8323E, Rev: 11 at 333.333 MHz Board: Freescale MPC8323ERDB I2C: ready DRAM: DDR RAM: 64 MB FLASH: 16 MB PCI clock is 66MHz In: serial Out: serial Err: serial Net: UEC: PHY is Generic MII (2430d80) FSL UEC0: Full Duplex FSL UEC0: Speed 100BT FSL UEC0: Link is up UEC: PHY is Generic MII (2430d80) FSL UEC1: Full Duplex FSL UEC1: Speed 100BT FSL UEC1: Link is up FSL UEC0, FSL UEC1 Hit any key to stop autoboot: 0 Using FSL UEC0 device TFTP from server 192.168.4.51; our IP address is 192.168.4.251 Filename 'uImage'. Load address: 0x200000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ############################################## done Bytes transferred = 1565627 (17e3bb hex) Using FSL UEC0 device TFTP from server 192.168.4.51; our IP address is 192.168.4.251 Filename 'my0.dtb'. Load address: 0x400000 Loading: ## done Bytes transferred = 6251 (186b hex) ## Booting image at 00200000 ... Image Name: Linux-2.6.24Coral_Router_1.0.0 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1565563 Bytes = 1.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using flat device tree at 0x400000 Using MPC832x RDB machine description Linux version 2.6.24Coral_Router_1.0.0 (root@domain.hid) (gcc version 4.2.2) #8 Tue Jul 8 15:57:38 IST 2008 console [udbg0] enabled setup_arch: bootmem mpc832x_rdb_setup_arch() Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0 arch: exit Zone PFN ranges: DMA 0 -> 16384 Normal 16384 -> 16384 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 16384 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: root=/dev/nfs rw nfsroot=192.168.4.51:/opt/eldk/nfs2 ip=192.168.4.251:192.168.4.51::::eth0:off console=ttyS0,115200 IPIC (128 IRQ sources) at fdefb700 PID hash table entries: 256 (order: 8, 1024 bytes) clocksource: timebase mult[7800001] shift[22] registered I-pipe 2.1-04: pipeline enabled. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 61460k/65536k available (3116k kernel code, 4012k reserved, 152k data, 127k bss, 148k init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 net_namespace: 64 bytes NET: Registered protocol family 16 PCI: Probing PCI hardware SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Time: timebase clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 18) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 19) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. UCC Ethernet Controller MII Bus: probed ucc_geth: QE UCC Gigabit Ethernet Controller ucc_geth: UCC2 at 0xe0103000 (irq = 21) ucc_geth: UCC3 at 0xe0102200 (irq = 34) Driver 'sd' needs updating - please use bus_type methods mpc83xx_spi.1: MPC83xx SPI Controller driver at 0xc50084c0 (irq = 20) usbmon: debugfs is not available Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i2c /dev entries driver WDT driver for MPC83xx initialized. mode:reset timeout=65535 (32 seconds) mmc_spi spi1216.0: SD/MMC host mmc0, no DMA, no WP, no poweroff TCP cubic registered irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 Kernel stack overflow in process c38347a0, r1=c390c230 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 irq 33, desc: c03140b8, depth: 0, count: 0, unhandled: 0 --=-XOl/kPHQvmN/nw/tBiFF Content-Disposition: attachment; filename=working_kernel.conf Content-Type: text/plain; name=working_kernel.conf; charset=utf-8 Content-Transfer-Encoding: 7bit # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24Coral_Router_1.0.0 # Tue Jul 8 15:40:36 2008 # # CONFIG_PPC64 is not set # # Processor support # CONFIG_6xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_83xx=y CONFIG_PPC_FPU=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y # CONFIG_SOFTDISABLE is not set CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set # CONFIG_FAIR_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_LOGBUFFER is not set CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Real-time sub-system # # CONFIG_XENOMAI is not set CONFIG_XENO_GENERIC_STACKPOOL=y # # Platform support # # CONFIG_PPC_MULTIPLATFORM is not set # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set CONFIG_MPC832x_RDB=y # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set CONFIG_PPC_MPC832x=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_IPIPE is not set # CONFIG_HIGHMEM is not set CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y CONFIG_WANT_DEVICE_TREE=y CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_BOOT_LOAD=0x00800000 # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y CONFIG_UGETH_NAPI=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IBM_OF is not set CONFIG_I2C_MPC=y # CONFIG_I2C_MPC8260 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_24C01A is not set # CONFIG_SENSORS_AD7416 is not set # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_MAX6900 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FM75 is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1115 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_WD is not set # CONFIG_SOFT_WATCHDOG is not set CONFIG_83xx_WDT=y # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_BIG_ENDIAN_DESC is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # # MMC/SD Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # # Userspace I/O # # CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set CONFIG_NLS_ISO8859_8=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_UCC_SLOW is not set CONFIG_UCC_FAST=y CONFIG_UCC=y # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y # CONFIG_INSTRUMENTATION is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y --=-XOl/kPHQvmN/nw/tBiFF--