[linux-dvb] Problems with ATI USB Hybrid

[Ronnie Bailey <purevw@wtxs.net>]

[-- Attachment #1.1: Type: text/plain, Size: 3580 bytes --]

Hi All,
    I am trying to install an ATI TV Wonder HD 600 USB card and not
having any luck. No matter what I try, there is no /dev/video  and also
no /dev/dvb.  The module seems to load OK, but the card is not found.
Yast sees the card, but only identifies it as a USB device and not a TV
card. I'll include what info I have. I would appreciate any help
offered. I am trying my best to eliminate Microsoft from my systems.
This driver problem is one of the last major headaches. I'm not sure if
this matters, but I need to set it up as NTSC-M with us cable. Channel 3
will be the only channel used.

Yast Hardware information states:

  102: udi =
'/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035'
  info.subsystem = 'usb_device'
  usb_device.vendor = 'Advanced Micro Devices, Inc.'
  usb_device.bus_number = 2 (0x2)
  linux.subsystem = 'usb'
  info.linux.driver = 'usb'
  usb_device.product = 'ATI TV Wonder 600 USB 2.0'
  info.product = 'ATI TV Wonder 600 USB 2.0'
  linux.device_file = '/dev/bus/usb/002/008'
  usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7'
  usb_device.device_revision_bcd = 272 (0x110)
  info.udi =
'/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035'
  usb_device.configuration_value = 1 (0x1)
  usb_device.max_power = 500 (0x1f4)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_ports = 0 (0x0)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.linux.device_number = 8 (0x8)
  usb_device.device_class = 0 (0x0)
  usb_device.serial = '660729005035'
  linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7'
  usb_device.device_subclass = 0 (0x0)
  info.vendor = 'Advanced Micro Devices, Inc.'
  usb_device.speed = 480.000
  info.parent =
'/org/freedesktop/Hal/devices/usb_device_50d_237_noserial'
  usb_device.device_protocol = 0 (0x0)
  usb_device.version = 2.00000
  usb_device.vendor_id = 1080 (0x438)
  usb_device.is_self_powered = false
  usb_device.product_id = 45058 (0xb002)
  usb_device.can_wake_up = false
  linux.hotplug_type = 2 (0x2)

Pertinent lsmod info:

Module                Size            Used By
em28xx_dvb           26884          0
dvb_core              109348          1 em28xx_dvb
em28xx                   81836          1 em28xx_dvb
compat_ioctl32        25856          1 em28xx
videodev                  55040          2 em28xx,compat_ioctl32
v4l1_compat            31620          1 videodev
videobuf_vmalloc       25476          1 em28xx
videobuf_core          38788          2 em28xx,videobuf_vmalloc
ir_common              60932          2 ir_kbd_i2c,em28xx
v4l2_common            29824          1 em28xx
tveeprom               30724              1 em28xx

lsusb gives me this:

Bus 002 Device 008: ID 0438:b002 Advanced Micro Devices, Inc.

dmesg shows:

fuse init (API version 7.9)
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
usbcore: registered new interface driver em28xx
Em28xx: Initialized (Em28xx dvb Extension) extension

Xine posted a couple of warning messages:

Jul 8 12:26:44 Opto xinetd[3495]: No such internal service: chargen/raw
- DISABLING

Jul 8 12:26:45 Opto xinetd[3495]: Port not specified and can't find
service: netstat with getservbyname

Jul 8 12:26:45 Opto xinetd[3495]: No such internal service:
servers/stream - DISABLING

Jul 8 12:26:45 Opto xinetd[3495]: No such internal service:
services/stream - DISABLING

When I open Xine and try to connect to DVB. it simply states:

Input plugin failed to open mrl 'Sorry, No DVB input device found

Thanks in advance,
Ronnie Bailey

[-- Attachment #1.2: Type: text/html, Size: 5653 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb