From: linux@audioscience.com
To: patch@alsa-project.org
Cc: Eliot Blennerhassett <eblennerhassett@audioscience.com>,
alsa-devel@alsa-project.org
Subject: [PATCH - asihpi 4/5] add extra checks to control cache
Date: Fri, 18 Jul 2008 18:00:18 +1200 [thread overview]
Message-ID: <1216360819-1847-4-git-send-email-linux@audioscience.com> (raw)
In-Reply-To: <1216360819-1847-3-git-send-email-linux@audioscience.com>
From: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
diff --git a/pci/asihpi/hpicmn.c b/pci/asihpi/hpicmn.c
index 4594a26..6543bf3 100644
--- a/pci/asihpi/hpicmn.c
+++ b/pci/asihpi/hpicmn.c
@@ -22,7 +22,7 @@
*******************************************************************************/
#define SOURCEFILE_NAME "hpicmn.c"
-#include "hpi.h"
+#include "hpi_internal.h"
#include "hpidebug.h"
#include "hpicmn.h"
@@ -304,8 +304,8 @@ short HpiCheckControlCache(
sizeof(struct hpi_control_res);
phr->wError = 0;
- /* pC is the default cached control strucure.
- May be cast to something else in the following switch statement.
+ /* pC is the default cached control strucure. May be cast to
+ something else in the following switch statement.
*/
pC = (struct hpi_control_cache_single *)pI;
@@ -406,7 +406,6 @@ short HpiCheckControlCache(
else
found = 0;
break;
-#ifndef HPI_OS_WIN16 /* SGT - below does not compile in Borland C */
case HPI_CONTROL_PAD:
{
struct hpi_control_cache_pad *pPad =
@@ -474,6 +473,8 @@ short HpiCheckControlCache(
break;
nStringLength = strlen(aDesc[dwIndex].pData);
+ if (nStringLength > (int)aDesc[dwIndex].nSize)
+ nStringLength = aDesc[dwIndex].nSize;
if (dwOffset > (unsigned)nStringLength) {
phr->wError =
HPI_ERROR_INVALID_CONTROL_VALUE;
@@ -486,14 +487,16 @@ short HpiCheckControlCache(
&aDesc[dwIndex].pData[dwOffset], 8);
nRemainingChars =
nStringLength - dwOffset - 8;
- if (nRemainingChars < 0)
+ if (nRemainingChars < 0) {
nRemainingChars = 0;
+ phr->u.cu.chars8.szData[8 +
+ nRemainingChars] = 0;
+ }
phr->u.cu.chars8.dwRemainingChars =
nRemainingChars;
}
}
break;
-#endif
default:
found = 0;
break;
@@ -540,6 +543,8 @@ void HpiSyncControlCache(
break;
case HPI_CONTROL_MULTIPLEXER:
/* mux does not return its setting on Set command. */
+ if (phr->wError)
+ return;
if (phm->u.c.wAttribute == HPI_MULTIPLEXER_SOURCE) {
pC->u.x.wSourceNodeType = (u16)phm->u.c.dwParam1;
pC->u.x.wSourceNodeIndex = (u16)phm->u.c.dwParam2;
@@ -547,6 +552,8 @@ void HpiSyncControlCache(
break;
case HPI_CONTROL_CHANNEL_MODE:
/* mode does not return its setting on Set command. */
+ if (phr->wError)
+ return;
if (phm->u.c.wAttribute == HPI_CHANNEL_MODE_MODE)
pC->u.m.wMode = (u16)phm->u.c.dwParam1;
break;
@@ -557,14 +564,20 @@ void HpiSyncControlCache(
}
break;
case HPI_CONTROL_AESEBU_TRANSMITTER:
+ if (phr->wError)
+ return;
if (phm->u.c.wAttribute == HPI_AESEBUTX_FORMAT)
pC->u.aes3tx.dwFormat = phm->u.c.dwParam1;
break;
case HPI_CONTROL_AESEBU_RECEIVER:
+ if (phr->wError)
+ return;
if (phm->u.c.wAttribute == HPI_AESEBURX_FORMAT)
pC->u.aes3rx.dwSource = phm->u.c.dwParam1;
break;
case HPI_CONTROL_SAMPLECLOCK:
+ if (phr->wError)
+ return;
if (phm->u.c.wAttribute == HPI_SAMPLECLOCK_SOURCE)
pC->u.clk.wSource = (u16)phm->u.c.dwParam1;
else if (phm->u.c.wAttribute == HPI_SAMPLECLOCK_SOURCE_INDEX) {
--
1.5.4.3
next prev parent reply other threads:[~2008-07-18 6:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-18 6:00 [PATCH - asihpi 1/5] split public and private defs linux
2008-07-18 6:00 ` [PATCH - asihpi 2/5] add control-specific query functions linux
2008-07-18 6:00 ` [PATCH - asihpi 3/5] use new " linux
2008-07-18 6:00 ` linux [this message]
2008-07-18 6:00 ` [PATCH - asihpi 5/5] Update to hpi_internal.h. Minor cleanups linux
2008-07-29 12:52 ` [PATCH - asihpi 4/5] add extra checks to control cache Takashi Iwai
2008-07-20 15:43 ` [PATCH - asihpi 1/5] split public and private defs Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1216360819-1847-4-git-send-email-linux@audioscience.com \
--to=linux@audioscience.com \
--cc=alsa-devel@alsa-project.org \
--cc=eblennerhassett@audioscience.com \
--cc=patch@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.