From: Thomas Meyer <thomas@m3y3r.de>
To: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [OOPS] kmem_cache_alloc (next-20080718)
Date: Sun, 20 Jul 2008 15:00:26 +0200 [thread overview]
Message-ID: <1216558826.3118.9.camel@dhcppc2> (raw)
I've got this patch on top of next-20080718:
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index e23399c..b566516 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -108,7 +108,13 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
entry->end = end;
entry->type = type;
INIT_LIST_HEAD(&entry->list);
- kobject_init(&entry->kobj, &memmap_ktype);
+ /*
+ * don't init the kobject here since it calls kmalloc() internally
+ * which we are not ready to do in firmware_map_add_early() case
+ * Instead, do that before kobject_add() in memmap_init()
+ */
+ memset(&entry->kobj, 0, sizeof(struct kobject));
+
list_add_tail(&entry->list, &map_entries);
@@ -195,6 +201,7 @@ static int __init memmap_init(void)
return -ENOMEM;
list_for_each_entry(entry, &map_entries, list) {
+ kobject_init(&entry->kobj, &memmap_ktype);
entry->kobj.kset = memmap_kset;
kobject_add(&entry->kobj, NULL, "%d", i++);
}
diff --git a/fs/namei.c b/fs/namei.c
index a15c155..33dc63d 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -286,7 +286,8 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
if (retval)
return retval;
- return security_inode_permission(inode, mask);
+ return security_inode_permission(inode,
+ mask & (MAY_READ|MAY_WRITE|MAY_EXEC));
}
/**
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index b91a5de..2240a9e 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -44,13 +44,6 @@ static struct ctl_table_root net_sysctl_root = {
.lookup = net_ctl_header_lookup,
};
-static LIST_HEAD(net_sysctl_ro_tables);
-static struct list_head *net_ctl_ro_header_lookup(struct ctl_table_root *root,
- struct nsproxy *namespaces)
-{
- return &net_sysctl_ro_tables;
-}
-
static int net_ctl_ro_header_perms(struct ctl_table_root *root,
struct nsproxy *namespaces, struct ctl_table *table)
{
@@ -61,7 +54,6 @@ static int net_ctl_ro_header_perms(struct ctl_table_root *root,
}
static struct ctl_table_root net_sysctl_ro_root = {
- .lookup = net_ctl_ro_header_lookup,
.permissions = net_ctl_ro_header_perms,
};
@@ -89,6 +81,7 @@ static __init int sysctl_init(void)
if (ret)
goto out;
register_sysctl_root(&net_sysctl_root);
+ setup_sysctl_set(&net_sysctl_ro_root.default_set, NULL, NULL);
register_sysctl_root(&net_sysctl_ro_root);
out:
return ret;
This leads to the following oops:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26-next-20080718 (thomas@dhcppc2) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #18 SMP Sun Jul 20 14:32:29 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] RAMDISK: 37cfe000 - 37fef176
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98B0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BFFD0000, 003C (r1 MSIISM OEMRSDT 4000807 MSFT 97)
[ 0.000000] ACPI: FACP BFFD0200, 0084 (r2 MSIISM OEMFACP 4000807 MSFT 97)
[ 0.000000] ACPI: DSDT BFFD0440, 5045 (r1 1ADGH 1ADGH013 13 INTL 20051117)
[ 0.000000] ACPI: FACS BFFDE000, 0040
[ 0.000000] ACPI: APIC BFFD0390, 0070 (r1 MSIISM OEMAPIC 4000807 MSFT 97)
[ 0.000000] ACPI: MCFG BFFD0400, 003C (r1 MSIISM OEMMCFG 4000807 MSFT 97)
[ 0.000000] ACPI: OEMB BFFDE040, 0061 (r1 MSIISM AMI_OEM 4000807 MSFT 97)
[ 0.000000] ACPI: HPET BFFD5490, 0038 (r1 MSIISM OEMHPET0 4000807 MSFT 97)
[ 0.000000] ACPI: SSDT BFFD54D0, 028A (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] 6272MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000400000 - 0000877ef8] TEXT DATA BSS ==> [0000400000 - 0000877ef8]
[ 0.000000] #4 [0037cfe000 - 0037fef176] RAMDISK ==> [0037cfe000 - 0037fef176]
[ 0.000000] #5 [0000878000 - 0000881000] INIT_PG_TABLE ==> [0000878000 - 0000881000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffd0
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] PERCPU: Allocating 31028 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1558383
[ 0.000000] Kernel command line: ro root=LABEL=ROOT rhgb netconsole=@192.168.3.1/,@192.168.3.2/ forcedeth.poll_interval=65534
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 2600.008 MHz processor.
[ 0.001999] Console: colour VGA+ 80x25
[ 0.001999] console [tty0] enabled
[ 0.001999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.001999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.001999] Memory: 6223936k/7340032k available (2307k kernel code, 65996k reserved, 1153k data, 268k init, 5373760k highmem)
[ 0.001999] virtual kernel memory layout:
[ 0.001999] fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
[ 0.001999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.001999] vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
[ 0.001999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.001999] .init : 0xc0767000 - 0xc07aa000 ( 268 kB)
[ 0.001999] .data : 0xc0640cb6 - 0xc07613f8 (1153 kB)
[ 0.001999] .text : 0xc0400000 - 0xc0640cb6 (2307 kB)
[ 0.001999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.001999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>5200.01 BogoMIPS (lpj=2600008)
[ 0.001999] Security Framework initialized
[ 0.001999] SELinux: Initializing.
[ 0.001999] Mount-cache hash table entries: 512
[ 0.001999] Initializing cgroup subsys ns
[ 0.001999] Initializing cgroup subsys cpuacct
[ 0.001999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001999] CPU 0(2) -> Core 0
[ 0.001999] Intel machine check architecture supported.
[ 0.001999] Intel machine check reporting enabled on CPU#0.
[ 0.001999] using C1E aware idle routine
[ 0.001999] Checking 'hlt' instruction... OK.
[ 0.004951] ACPI: Core revision 20080609
[ 0.011135] ENABLING IO-APIC IRQs
[ 0.011347] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021577] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.021996] Booting processor 1/1 ip 6000
[ 0.031995] Initializing CPU#1
[ 0.092651] Calibrating delay using timer specific routine.. <6>5199.68 BogoMIPS (lpj=2599844)
[ 0.092658] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.092659] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.092661] CPU 1(2) -> Core 1
[ 0.092663] Intel machine check architecture supported.
[ 0.092664] Intel machine check reporting enabled on CPU#1.
[ 0.092840] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.092806] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.092985] Brought up 2 CPUs
[ 0.092985] Total of 2 processors activated (10399.70 BogoMIPS).
[ 0.093313] net_namespace: 732 bytes
[ 0.093553] NET: Registered protocol family 16
[ 0.093776] No dock devices found.
[ 0.093911] ACPI: bus type pci registered
[ 0.094015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.094064] PCI: Not using MMCONFIG.
[ 0.094660] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 0.094708] PCI: Using configuration type 1 for base access
[ 0.104980] ACPI: Interpreter enabled
[ 0.105029] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.105173] ACPI: Using IOAPIC for interrupt routing
[ 0.105258] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.110066] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.110114] PCI: Using MMCONFIG for extended config space
[ 0.118565] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.118815] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.118867] pci 0000:00:01.1: PME# disabled
[ 0.118944] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.118995] pci 0000:00:02.0: PME# disabled
[ 0.119069] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119118] pci 0000:00:02.1: PME# disabled
[ 0.119301] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.119350] pci 0000:00:06.1: PME# disabled
[ 0.119437] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119486] pci 0000:00:08.0: PME# disabled
[ 0.119569] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119619] pci 0000:00:09.0: PME# disabled
[ 0.119683] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119731] pci 0000:00:0a.0: PME# disabled
[ 0.119796] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119845] pci 0000:00:0b.0: PME# disabled
[ 0.119908] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119957] pci 0000:00:0c.0: PME# disabled
[ 0.120021] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120069] pci 0000:00:0d.0: PME# disabled
[ 0.120132] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120180] pci 0000:00:0e.0: PME# disabled
[ 0.120242] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120290] pci 0000:00:0f.0: PME# disabled
[ 0.120405] pci 0000:00:06.0: transparent bridge
[ 0.130686] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.131700] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.132154] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.132905] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.132979] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.133453] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.133807] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
[ 0.134163] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.134543] ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7
[ 0.134884] ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
[ 0.135188] ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
[ 0.135526] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.135825] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[ 0.135979] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
[ 0.136312] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
[ 0.136644] ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
[ 0.136978] ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
[ 0.137358] ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
[ 0.137724] ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
[ 0.138034] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.138109] pnp: PnP ACPI init
[ 0.138162] ACPI: bus type pnp registered
[ 0.142438] pnp: PnP ACPI: found 14 devices
[ 0.142486] ACPI: ACPI bus type pnp unregistered
[ 0.142723] usbcore: registered new interface driver usbfs
[ 0.142810] usbcore: registered new interface driver hub
[ 0.142903] usbcore: registered new device driver usb
[ 0.143081] PCI: Using ACPI for IRQ routing
[ 0.143984] NetLabel: Initializing
[ 0.144032] NetLabel: domain hash size = 128
[ 0.144078] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.144134] NetLabel: unlabeled traffic allowed by default
[ 0.144188] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.144313] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.145655] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.145689] actual entries 65620
[ 0.148403] ACPI: RTC can wake from S4
[ 0.149867] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.149916] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.149968] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 0.150016] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 0.150065] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 0.150119] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 0.150167] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 0.150216] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 0.150265] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 0.150313] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 0.150363] system 00:05: iomem range 0xfea80000-0xfeabffff has been reserved
[ 0.150412] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.150490] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.150566] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.150644] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.150693] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.150744] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.150795] system 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.150879] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.150927] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.150976] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.151025] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.151105] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.181811] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.181866] pci 0000:00:06.0: IO window: disabled
[ 0.181917] pci 0000:00:06.0: MEM window: disabled
[ 0.181965] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.182014] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.182062] pci 0000:00:0a.0: IO window: disabled
[ 0.182114] pci 0000:00:0a.0: MEM window: disabled
[ 0.182161] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.182210] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.182258] pci 0000:00:0b.0: IO window: disabled
[ 0.182306] pci 0000:00:0b.0: MEM window: disabled
[ 0.182354] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.182402] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.182451] pci 0000:00:0c.0: IO window: disabled
[ 0.182498] pci 0000:00:0c.0: MEM window: disabled
[ 0.182546] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.182595] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 0.182642] pci 0000:00:0d.0: IO window: disabled
[ 0.182690] pci 0000:00:0d.0: MEM window: disabled
[ 0.182738] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.182787] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
[ 0.182835] pci 0000:00:0e.0: IO window: disabled
[ 0.182889] pci 0000:00:0e.0: MEM window: disabled
[ 0.182936] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.182986] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
[ 0.183034] pci 0000:00:0f.0: IO window: 0xe000-0xefff
[ 0.183082] pci 0000:00:0f.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.183136] pci 0000:00:0f.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.183249] NET: Registered protocol family 2
[ 0.186895] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.187167] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.187874] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.188240] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.188289] TCP reno registered
[ 0.189917] NET: Registered protocol family 1
[ 0.190062] checking if image is initramfs... it is
[ 0.362145] Freeing initrd memory: 3012k freed
[ 0.362838] Machine check exception polling timer started.
[ 0.363284] audit: initializing netlink socket (disabled)
[ 0.363348] type=2000 audit(1216564922.362:1): initialized
[ 0.367792] highmem bounce pool size: 64 pages
[ 0.367841] Total HugeTLB memory allocated, 0
[ 0.370017] VFS: Disk quotas dquot_6.5.1
[ 0.370144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.370329] msgmni has been set to 1668
[ 0.370622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.370697] io scheduler noop registered
[ 0.370744] io scheduler anticipatory registered
[ 0.370792] io scheduler deadline registered
[ 0.370846] io scheduler cfq registered (default)
[ 0.370923] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.412137] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 0.412195] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 0.412252] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 0.412308] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 0.412366] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 0.412425] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.412484] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.413093] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.413151] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.413208] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 0.413265] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.413316] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.413316] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.413316] pcieport-driver 0000:00:0a.0: found MSI capability
[ 0.413316] pcieport-driver 0000:00:0b.0: found MSI capability
[ 0.413316] pcieport-driver 0000:00:0c.0: found MSI capability
[ 0.413316] pcieport-driver 0000:00:0d.0: found MSI capability
[ 0.413316] pcieport-driver 0000:00:0e.0: found MSI capability
[ 0.413316] pcieport-driver 0000:00:0f.0: found MSI capability
[ 0.413316] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.413316] processor ACPI0007:00: registered as cooling_device0
[ 0.413316] processor ACPI0007:01: registered as cooling_device1
[ 0.413316] isapnp: Scanning for PnP cards...
[ 0.754253] isapnp: No Plug & Play device found
[ 0.757081] Non-volatile memory driver v1.2
[ 0.757134] Linux agpgart interface v0.103
[ 0.757541] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.759405] brd: module loaded
[ 0.759465] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 0.759797] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 0.759852] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.274435] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:45:c9:df
[ 1.274511] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 1.274826] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 1.274875] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 1.788414] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:45:c9:de
[ 1.788489] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 1.788612] netconsole: local port 6665
[ 1.788660] netconsole: local IP 192.168.3.1
[ 1.788707] netconsole: interface eth0
[ 1.788754] netconsole: remote port 6666
[ 1.788801] netconsole: remote IP 192.168.3.2
[ 1.788849] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 1.788897] netconsole: device eth0 not up yet, forcing it
[ 1.789253] eth0: no link during initialization.
[ 3.803675] eth0: link up.
[ 3.805107] console [netcon0] enabled
[ 3.821844] netconsole: network logging started
[ 3.822848] input: Macintosh mouse button emulation as /class/input/input0
[ 3.823175] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.825908] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.825960] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.826191] mice: PS/2 mouse device common for all mice
[ 3.869616] cpuidle: using governor ladder
[ 3.869665] cpuidle: using governor menu
[ 3.869827] usbcore: registered new interface driver hiddev
[ 3.869916] usbcore: registered new interface driver usbhid
[ 3.869968] usbhid: v2.6:USB HID core driver
[ 3.870456] TCP cubic registered
[ 3.870504] Initializing XFRM netlink socket
[ 3.870559] NET: Registered protocol family 17
[ 3.870634] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[ 3.872012] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 3.872065] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 3.872114] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 3.872163] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 3.872212] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 3.872266] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 3.872375] Using IPI No-Shortcut mode
[ 3.872579] registered taskstats version 1
[ 3.872923] Freeing unused kernel memory: 268k freed
[ 3.872988] Write protecting the kernel text: 2308k
[ 3.873062] Write protecting the kernel read-only data: 956k
[ 4.133072] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 4.133135] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 4.133221] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.133343] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.133437] ehci_hcd 0000:00:02.1: debug port 1
[ 4.133501] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeafac00
[ 4.140005] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.140142] usb usb1: configuration #1 chosen from 1 choice
[ 4.140210] hub 1-0:1.0: USB hub found
[ 4.140267] hub 1-0:1.0: 10 ports detected
[ 4.344351] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 4.344419] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 4.344509] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.344612] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.344707] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfeafb000
[ 4.397050] usb usb2: configuration #1 chosen from 1 choice
[ 4.397121] hub 2-0:1.0: USB hub found
[ 4.397176] hub 2-0:1.0: 10 ports detected
[ 4.443001] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 4.501647] USB Universal Host Controller Interface driver v3.0
[ 4.564455] device-mapper: uevent: version 1.0.3
[ 4.564599] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.567000] usb 1-4: configuration #1 chosen from 1 choice
[ 4.635109] padlock: VIA PadLock not detected.
[ 4.669006] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 4.711126] padlock: VIA PadLock Hash Engine not detected.
[ 4.786968] SCSI subsystem initialized
[ 4.787749] usb 1-6: configuration #1 chosen from 1 choice
[ 4.787970] hub 1-6:1.0: USB hub found
[ 4.788067] hub 1-6:1.0: 4 ports detected
[ 4.844914] Driver 'sd' needs updating - please use bus_type methods
[ 4.977972] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 4.978046] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 4.978122] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 4.978493] scsi0 : sata_nv
[ 4.978611] scsi1 : sata_nv
[ 4.978764] ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21
[ 4.978813] ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21
[ 5.053447] usb 1-6.1: new low speed USB device using ehci_hcd and address 4
[ 5.148092] usb 1-6.1: configuration #1 chosen from 1 choice
[ 5.155561] input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input1
[ 5.160027] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:02.1-6.1
[ 5.222444] usb 1-6.2: new low speed USB device using ehci_hcd and address 5
[ 5.307963] usb 1-6.2: configuration #1 chosen from 1 choice
[ 5.312401] input: DELL DELL USB Keyboard as /class/input/input2
[ 5.317027] input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.1-6.2
[ 5.326732] input: DELL DELL USB Keyboard as /class/input/input3
[ 5.337025] input,hidraw2: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:02.1-6.2
[ 5.454004] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.457086] ata1.00: ATAPI: PIONEER DVD-RW DVR-215, 1.18, max UDMA/66
[ 5.464085] ata1.00: configured for UDMA/66
[ 5.777326] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.783181] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.18 PQ: 0 ANSI: 0
[ 5.783597] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 5.783648] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 5.783729] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 5.784122] scsi2 : sata_nv
[ 5.784226] scsi3 : sata_nv
[ 5.784277] BUG: unable to handle kernel paging request at 32050000
[ 5.784365] IP: [<c047efcf>] kmem_cache_alloc+0x30/0x7d
[ 5.784437] *pdpt = 0000000036edf001 *pde = 0000000000000000
[ 5.784528] Oops: 0000 [#1] SMP
[ 5.784614] last sysfs file: /sys/class/firmware/timeout
[ 5.784664] Modules linked in: sata_nv(+) ata_generic libata sd_mod scsi_mod sha256_generic aes_i586 dm_crypt dm_snapshot dm_zero dm_mirror dm_log dm_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
[ 5.785170]
[ 5.785217] Pid: 518, comm: modprobe Not tainted (2.6.26-next-20080718 #18)
[ 5.785267] EIP: 0060:[<c047efcf>] EFLAGS: 00010006 CPU: 1
[ 5.785318] EIP is at kmem_cache_alloc+0x30/0x7d
[ 5.785366] EAX: 00000000 EBX: 32050000 ECX: f88d3c60 EDX: c481b620
[ 5.785415] ESI: c075e480 EDI: 00000286 EBP: f7884d14 ESP: f7884d00
[ 5.785465] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 5.785514] Process modprobe (pid: 518, ti=f7884000 task=f79798e0 task.ti=f7884000)
[ 5.785564] Stack: 000000d0 00000100 000000d0 000000d0 f6f21818 f7884d2c f88d3c60 f88ef748
[ 5.785818] 000000d0 f6f21800 f6f21818 f7884d40 f88d3ceb f88b7854 f6f21800 f786485c
[ 5.786071] f7884d58 f88d43e7 f7884d58 f6f3c000 f6df3434 00000001 f7884d74 f88fa394
[ 5.786255] Call Trace:
[ 5.786255] [<f88d3c60>] ? scsi_pool_alloc_command+0x18/0x59 [scsi_mod]
[ 5.786255] [<f88d3ceb>] ? scsi_setup_command_freelist+0x4a/0x7e [scsi_mod]
[ 5.786255] [<f88d43e7>] ? scsi_add_host+0x58/0x184 [scsi_mod]
[ 5.786255] [<f88fa394>] ? ata_scsi_add_hosts+0x8e/0xde [libata]
[ 5.786255] [<f88f7c95>] ? ata_host_register+0x89/0x1fd [libata]
[ 5.786255] [<f88f7e9c>] ? ata_host_activate+0x93/0xb3 [libata]
[ 5.786255] [<f88b36ba>] ? nv_init_one+0x2d6/0x2e0 [sata_nv]
[ 5.786255] [<c050a000>] ? pci_match_device+0xb/0x93
[ 5.786255] [<c050a5d0>] ? pci_device_probe+0x39/0x59
[ 5.786255] [<c0570591>] ? driver_probe_device+0xa0/0x136
[ 5.786255] [<c0570661>] ? __driver_attach+0x3a/0x59
[ 5.786255] [<c056ffc9>] ? bus_for_each_dev+0x3b/0x63
[ 5.786255] [<c0570436>] ? driver_attach+0x14/0x16
[ 5.786255] [<c0570627>] ? __driver_attach+0x0/0x59
[ 5.786255] [<c056f9fe>] ? bus_add_driver+0x9d/0x1ba
[ 5.786255] [<c05707eb>] ? driver_register+0x81/0xe1
[ 5.786255] [<c0474dda>] ? __vunmap+0x93/0x9b
[ 5.786255] [<c050a78f>] ? __pci_register_driver+0x3f/0x6c
[ 5.786255] [<f88ba017>] ? nv_init+0x17/0x19 [sata_nv]
[ 5.786255] [<c04455ed>] ? sys_init_module+0x15c9/0x17c9
[ 5.786255] [<f88f3a3f>] ? ata_port_start+0x0/0x2f [libata]
[ 5.786255] [<c04038b1>] ? sysenter_past_esp+0x6a/0x91
[ 5.786255] =======================
[ 5.786255] Code: 89 c6 53 83 ec 08 89 55 ec 8b 4d 04 9c 5f fa 64 a1 04 50 7a c0 8b 94 86 80 00 00 00 8b 42 10 89 45 f0 8b 1a 85 db 74 0a 8b 42 0c <8b> 04 83 89 02 eb 13 52 8b 55 ec 89 f0 51 83 c9 ff e8 ad f9 ff
[ 5.786255] EIP: [<c047efcf>] kmem_cache_alloc+0x30/0x7d SS:ESP 0068:f7884d00
[ 5.786255] ---[ end trace e5a47564365f26e7 ]---
[ 5.789799] eth0: too many iterations (6) in nv_nic_irq.
[ 5.789883] eth0: too many iterations (6) in nv_nic_irq.
[ 5.800828] eth0: too many iterations (6) in nv_nic_irq.
[ 5.800893] eth0: too many iterations (6) in nv_nic_irq.
[ 8.290413] BUG: unable to handle kernel paging request at 32050000
[ 8.291205] IP: [<c047efcf>] kmem_cache_alloc+0x30/0x7d
[ 8.291274] *pdpt = 0000000036df9001 *pde = 0000000000000000
[ 8.291362] Oops: 0000 [#2] SMP
[ 8.291448] last sysfs file: /sys/class/firmware/timeout
[ 8.291497] Modules linked in: sata_nv(+) ata_generic libata sd_mod scsi_mod sha256_generic aes_i586 dm_crypt dm_snapshot dm_zero dm_mirror dm_log dm_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
[ 8.291997]
[ 8.292044] Pid: 1, comm: init Tainted: G D (2.6.26-next-20080718 #18)
[ 8.292094] EIP: 0060:[<c047efcf>] EFLAGS: 00010006 CPU: 1
[ 8.292143] EIP is at kmem_cache_alloc+0x30/0x7d
[ 8.292192] EAX: 00000000 EBX: 32050000 ECX: c0494515 EDX: c481b620
[ 8.292241] ESI: c075e480 EDI: 00000296 EBP: f781eee0 ESP: f781eecc
[ 8.292255] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 8.292255] Process init (pid: 1, ti=f781e000 task=f7830000 task.ti=f781e000)
[ 8.292255] Stack: 000000d0 00000100 f6eb0000 f781ef50 00000000 f781ef24 c0494515 00000001
[ 8.292255] 00000001 c481e440 f7811100 000080d0 00000020 f7803280 f6eb0000 f6eb048c
[ 8.292255] f781ef1c c04d5f5b f6eb0000 f6eb0000 00000000 00000000 f781ef60 c042567f
[ 8.292255] Call Trace:
[ 8.292255] [<c0494515>] ? dup_fd+0x23/0x2cb
[ 8.292255] [<c04d5f5b>] ? selinux_task_alloc_security+0x22/0x68
[ 8.292255] [<c042567f>] ? copy_process+0x4fb/0xf70
[ 8.292255] [<c04815da>] ? sys_faccessat+0x13f/0x149
[ 8.292255] [<c04261ac>] ? do_fork+0xb8/0x1ed
[ 8.292255] [<c04023cb>] ? sys_clone+0x1f/0x21
[ 8.292255] [<c04038b1>] ? sysenter_past_esp+0x6a/0x91
[ 8.292255] =======================
[ 8.292255] Code: 89 c6 53 83 ec 08 89 55 ec 8b 4d 04 9c 5f fa 64 a1 04 50 7a c0 8b 94 86 80 00 00 00 8b 42 10 89 45 f0 8b 1a 85 db 74 0a 8b 42 0c <8b> 04 83 89 02 eb 13 52 8b 55 ec 89 f0 51 83 c9 ff e8 ad f9 ff
[ 8.292255] EIP: [<c047efcf>] kmem_cache_alloc+0x30/0x7d SS:ESP 0068:f781eecc
[ 8.292255] ---[ end trace e5a47564365f26e7 ]---
[ 8.292255] Kernel panic - not syncing: Attempted to kill init!
[ 8.292255] Pid: 1, comm: init Tainted: G D 2.6.26-next-20080718 #18
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c063b007>] panic+0x39/0xe0
[ 8.292255] [<c0429588>] do_exit+0x5b/0x6d1
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c042688d>] ? oops_exit+0x23/0x28
[ 8.292255] [<c0404c1d>] die+0x12b/0x133
[ 8.292255] [<c063e8e3>] ? do_page_fault+0x0/0x885
[ 8.292255] [<c063f04c>] do_page_fault+0x769/0x885
[ 8.292255] [<c04d3e53>] ? avc_has_perm+0x39/0x43
[ 8.292255] [<c0491bcf>] ? __d_lookup+0x9e/0xda
[ 8.292255] [<c0465d76>] ? get_page_from_freelist+0xcd/0x396
[ 8.292255] [<c063e8e3>] ? do_page_fault+0x0/0x885
[ 8.292255] [<c063d41a>] error_code+0x72/0x78
[ 8.292255] [<c0494515>] ? dup_fd+0x23/0x2cb
[ 8.292255] [<c047efcf>] ? kmem_cache_alloc+0x30/0x7d
[ 8.292255] [<c0494515>] dup_fd+0x23/0x2cb
[ 8.292255] [<c04d5f5b>] ? selinux_task_alloc_security+0x22/0x68
[ 8.292255] [<c042567f>] copy_process+0x4fb/0xf70
[ 8.292255] [<c04815da>] ? sys_faccessat+0x13f/0x149
[ 8.292255] [<c04261ac>] do_fork+0xb8/0x1ed
[ 8.292255] [<c04023cb>] sys_clone+0x1f/0x21
[ 8.292255] [<c04038b1>] sysenter_past_esp+0x6a/0x91
[ 8.292255] =======================
[ 8.292255] ------------[ cut here ]------------
[ 8.292255] WARNING: at kernel/smp.c:288 smp_call_function_mask+0x2b/0x119()
[ 8.292255] Modules linked in: sata_nv(+) ata_generic libata sd_mod scsi_mod sha256_generic aes_i586 dm_crypt dm_snapshot dm_zero dm_mirror dm_log dm_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
[ 8.292255] Pid: 1, comm: init Tainted: G D 2.6.26-next-20080718 #18
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c0426761>] warn_on_slowpath+0x41/0x7b
[ 8.292255] eth0: too many iterations (6) in nv_nic_irq.
[ 8.292255] [<c057ae82>] ? write_msg+0xb1/0xb9
[ 8.292255] [<c057add1>] ? write_msg+0x0/0xb9
[ 8.292255] [<c0426a0f>] ? __call_console_drivers+0x56/0x63
[ 8.292255] [<c043a526>] ? up+0x2b/0x2f
[ 8.292255] [<c0426e4f>] ? release_console_sem+0x177/0x17f
[ 8.292255] [<c0411f1c>] ? touch_nmi_watchdog+0x3f/0x42
[ 8.292255] [<c0435581>] ? __kernel_text_address+0x34/0x3e
[ 8.292255] [<c04425bf>] smp_call_function_mask+0x2b/0x119
[ 8.292255] [<c0410f57>] ? stop_this_cpu+0x0/0x36
[ 8.292255] [<c040519d>] ? show_trace+0x24/0x29
[ 8.292255] [<c063afc4>] ? dump_stack+0x5b/0x65
[ 8.292255] [<c04426bf>] smp_call_function+0x12/0x14
[ 8.292255] [<c0410f4a>] native_smp_send_stop+0x1b/0x28
[ 8.292255] [<c063b01b>] panic+0x4d/0xe0
[ 8.292255] [<c0429588>] <7>eth0: too many iterations (6) in nv_nic_irq.
[ 8.292255] do_exit+0x5b/0x6d1
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c063b0bd>] ? printk+0xf/0x12
[ 8.292255] [<c042688d>] ? oops_exit+0x23/0x28
[ 8.292255] [<c0404c1d>] die+0x12b/0x133
[ 8.292255] [<c063e8e3>] ? do_page_fault+0x0/0x885
reply other threads:[~2008-07-20 13:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1216558826.3118.9.camel@dhcppc2 \
--to=thomas@m3y3r.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.