From: Jaya Kumar <jayakumar.lkml@gmail.com>
To: ymiao3@marvell.com
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>,
linux-fbdev-devel@lists.sourceforge.net,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: [RFC 2.6.26-rc9 3/5] pxafb: add shared framebuffer interface
Date: Wed, 30 Jul 2008 08:51:07 -0400 [thread overview]
Message-ID: <1217422269-11093-4-git-send-email-jayakumar.lkml@gmail.com> (raw)
In-Reply-To: <1217422269-11093-1-git-send-email-jayakumar.lkml@gmail.com>
These changes are to make it possible for a secondary driver to share the
pxafb framebuffer. The changes include:
- adding extra_video_mem entry so that a driver can tell pxafb of its
additional needs.
- adding share_video_mem/unshare_video_mem callbacks to notify the secondary
driver of the framebuffer address, to allow refcounting, and to cleanup on
completion.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
---
drivers/video/pxafb.c | 31 ++++++++++++++++++++++++++-----
include/asm-arm/arch-pxa/pxafb.h | 7 +++++++
2 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index bb25143..f799c52 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -57,6 +57,8 @@
*/
#define DEBUG_VAR 1
+static struct platform_driver pxafb_driver;
+
#include "pxafb.h"
/* Bits which should not be set in machine configuration structures */
@@ -870,6 +872,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
{
u_long flags;
size_t nbytes;
+ struct pxafb_mach_info *inf = fbi->dev->platform_data;
#if DEBUG_VAR
if (!(fbi->lccr0 & LCCR0_LCDT)) {
@@ -1304,14 +1307,17 @@ static int pxafb_resume(struct platform_device *dev)
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
+static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi,
+ struct pxafb_mach_info *inf)
{
+ int ret;
/*
* We reserve one page for the palette, plus the size
* of the framebuffer.
*/
fbi->video_offset = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
- fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset);
+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset +
+ inf->extra_video_mem);
fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
&fbi->map_dma, GFP_KERNEL);
@@ -1340,6 +1346,13 @@ static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
fbi->n_smart_cmds = 0;
#endif
+ if (inf->share_video_mem) {
+ ret = inf->share_video_mem(fbi->fb.screen_base,
+ fbi->screen_dma, pxafb_driver.driver.owner,
+ inf->extra_data);
+ if (ret)
+ return ret;
+ }
}
return fbi->map_cpu ? 0 : -ENOMEM;
@@ -1761,10 +1774,12 @@ static int __devinit pxafb_probe(struct platform_device *dev)
}
/* Initialize video memory */
- ret = pxafb_map_video_memory(fbi);
- if (ret) {
+ ret = pxafb_map_video_memory(fbi, inf);
+ if (ret == -ENODEV) {
+ dev_err(&dev->dev, "Failed device binding: %d\n", ret);
+ goto failed_free_mem;
+ } else if (ret) {
dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
- ret = -ENOMEM;
goto failed_free_io;
}
@@ -1836,6 +1851,8 @@ failed_free_cmap:
failed_free_irq:
free_irq(irq, fbi);
failed_free_mem:
+ if (inf->unshare_video_mem)
+ inf->unshare_video_mem(inf->extra_data);
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
failed_free_io:
@@ -1856,6 +1873,7 @@ static int __devexit pxafb_remove(struct platform_device *dev)
struct resource *r;
int irq;
struct fb_info *info;
+ struct pxafb_mach_info *inf;
if (!fbi)
return 0;
@@ -1872,6 +1890,9 @@ static int __devexit pxafb_remove(struct platform_device *dev)
irq = platform_get_irq(dev, 0);
free_irq(irq, fbi);
+ inf = dev->dev.platform_data;
+ if (inf->unshare_video_mem)
+ inf->unshare_video_mem(inf->extra_data);
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
index daf018d..1ff9281 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -139,9 +139,16 @@ struct pxafb_mach_info {
* All other bits in LCCR4 should be left alone.
*/
u_int lccr4;
+ /* size of extra mem needed for secondary driver */
+ unsigned int extra_video_mem;
+ void *extra_data; /* extra data for secondary */
void (*pxafb_backlight_power)(int);
void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
void (*smart_update)(struct fb_info *);
+ /* share_video_mem allows client drivers to get our framebuffer */
+ int (*share_video_mem)(char __iomem *, dma_addr_t, struct module *,
+ void *);
+ void (*unshare_video_mem)(void *);
};
void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
void set_pxa_fb_parent(struct device *parent_dev);
--
1.5.3.6
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-07-30 13:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 12:51 [RFC 2.6.26-rc9 0/5] am200epd, pxafb, metronomefb changes v8 Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 1/5] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 2/5] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-07-30 12:51 ` Jaya Kumar [this message]
2008-07-31 15:28 ` [RFC 2.6.26-rc9 3/5] pxafb: add shared framebuffer interface Krzysztof Helt
2008-08-02 12:06 ` Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 4/5] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-07-31 15:46 ` Krzysztof Helt
2008-08-02 13:32 ` Jaya Kumar
2008-08-03 14:29 ` Krzysztof Helt
2008-07-30 12:51 ` [RFC 2.6.26-rc9 5/5] metronomefb: changes to use separate framebuffer Jaya Kumar
2008-08-01 20:47 ` Krzysztof Helt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217422269-11093-4-git-send-email-jayakumar.lkml@gmail.com \
--to=jayakumar.lkml@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=ymiao3@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.