From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Dhaval Giani <dhaval@linux.vnet.ibm.com>,
Mike Travis <travis@sgi.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 05/25] x86: alloc dyn_array all alltogether
Date: Sat, 2 Aug 2008 19:59:05 -0700 [thread overview]
Message-ID: <1217732365-16595-6-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1217732365-16595-5-git-send-email-yhlu.kernel@gmail.com>
so could spare some memory with small alignment in bootmem
also tighten the alignment checking..., and make print out less debug info
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/setup_percpu.c | 16 +++++++---
include/linux/init.h | 2 +-
init/main.c | 65 ++++++++++++++++++++++++++++++---------
3 files changed, 62 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 13ba7a8..4702c12 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -140,26 +140,31 @@ static void __init setup_cpu_pda_map(void)
*/
void __init setup_per_cpu_areas(void)
{
- ssize_t size, old_size;
+ ssize_t size, old_size, da_size;
char *ptr;
int cpu;
+ unsigned long align = 1;
/* Setup cpu_pda map */
setup_cpu_pda_map();
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = old_size + per_cpu_dyn_array_size();
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = roundup(old_size + da_size, align);
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);
for_each_possible_cpu(cpu) {
#ifndef CONFIG_NEED_MULTIPLE_NODES
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
#else
int node = early_cpu_to_node(cpu);
if (!node_online(node) || !NODE_DATA(node)) {
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
@@ -168,7 +173,8 @@ void __init setup_per_cpu_areas(void)
cpu, __pa(ptr));
}
else {
- ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+ ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
+ __pa(MAX_DMA_ADDRESS));
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
cpu, node, __pa(ptr));
diff --git a/include/linux/init.h b/include/linux/init.h
index 9fbe61b..2e42af8 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -291,7 +291,7 @@ extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[]
DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
extern void pre_alloc_dyn_array(void);
-extern unsigned long per_cpu_dyn_array_size(void);
+extern unsigned long per_cpu_dyn_array_size(unsigned long *align);
extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
#endif /* __ASSEMBLY__ */
diff --git a/init/main.c b/init/main.c
index a600562..3454b4a 100644
--- a/init/main.c
+++ b/init/main.c
@@ -397,10 +397,14 @@ static void __init setup_per_cpu_areas(void)
unsigned long size, i, old_size;
char *ptr;
unsigned long nr_possible_cpus = num_possible_cpus();
+ unsigned long align = 1;
+ unsigned da_size;
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = ALIGN(old_size + per_cpu_dyn_array_size(), PAGE_SIZE);
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = ALIGN(old_size + da_size, align);
ptr = alloc_bootmem_pages(size * nr_possible_cpus);
for_each_possible_cpu(i) {
@@ -544,45 +548,78 @@ void __init __weak thread_info_cache_init(void)
void pre_alloc_dyn_array(void)
{
#ifdef CONFIG_HAVE_DYN_ARRAY
- unsigned long size, phys = 0;
+ unsigned long total_size = 0, size, phys;
+ unsigned long max_align = 1;
struct dyn_array **daa;
+ char *ptr;
+ /* get the total size at first */
for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+ printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
- *da->name = __alloc_bootmem_nopanic(size, da->align, phys);
- phys = virt_to_phys(*da->name);
+ total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
+ }
+ if (total_size)
+ printk(KERN_DEBUG "dyn_array total_size: %#lx\n",
+ total_size);
+ else
+ return;
+
+ /* allocate them all together */
+ max_align = max_t(unsigned long, max_align, PAGE_SIZE);
+ ptr = __alloc_bootmem_nopanic(total_size, max_align, 0);
+ if (!ptr)
+ panic("Can not alloc dyn_alloc\n");
+
+ phys = virt_to_phys(ptr);
+ for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
+ struct dyn_array *da = *daa;
+
+ size = da->size * (*da->nr);
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+
+ phys = roundup(phys, da->align);
+ *da->name = phys_to_virt(phys);
printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+ phys += size;
+
if (da->init_work)
da->init_work(da);
}
#endif
}
-unsigned long per_cpu_dyn_array_size(void)
+unsigned long per_cpu_dyn_array_size(unsigned long *align)
{
unsigned long total_size = 0;
#ifdef CONFIG_HAVE_DYN_ARRAY
unsigned long size;
struct dyn_array **daa;
+ unsigned max_align = 1;
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
}
- if (total_size)
- printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
+ if (total_size) {
+ printk(KERN_DEBUG "per_cpu_dyn_array total_size: %#lx\n",
total_size);
+ *align = max_align;
+ }
#endif
return total_size;
}
@@ -596,14 +633,11 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
void **array;
phys = virt_to_phys(ptr);
-
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
- da->size, *da->nr, da->align);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
phys = roundup(phys, da->align);
addr = (unsigned long)da->name;
@@ -611,7 +645,8 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
array = (void **)addr;
*array = phys_to_virt(phys);
*da->name = *array; /* so init_work could use it directly */
- printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
+ printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+
phys += size;
if (da->init_work) {
--
1.5.4.5
next prev parent reply other threads:[~2008-08-03 3:02 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-03 2:59 [PATCH 00/25] dyn_array and nr_irqs support v3 Yinghai Lu
2008-08-03 2:59 ` [PATCH 01/25] x86: 64bit support more than 256 irq v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 02/25] x86: remove irq_vectors_limits Yinghai Lu
2008-08-03 2:59 ` [PATCH 03/25] add dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 04/25] add per_cpu_dyn_array support Yinghai Lu
2008-08-03 2:59 ` Yinghai Lu [this message]
2008-08-03 2:59 ` [PATCH 06/25] x86: enable dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 07/25] introduce nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 08/25] x86: using nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 09/25] drivers/char to use nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 10/25] drivers/net " Yinghai Lu
2008-08-03 2:59 ` [PATCH 11/25] drivers intr remapping " Yinghai Lu
2008-08-03 2:59 ` [PATCH 12/25] drivers/pcmcia " Yinghai Lu
2008-08-03 2:59 ` [PATCH 13/25] drivers/rtc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 14/25] drivers/scsi " Yinghai Lu
2008-08-03 2:59 ` [PATCH 15/25] drivers/serial " Yinghai Lu
2008-08-03 2:59 ` [PATCH 16/25] drivers proc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 17/25] drivers xen events " Yinghai Lu
2008-08-03 2:59 ` [PATCH 18/25] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 19/25] make irq2_iommu " Yinghai Lu
2008-08-03 2:59 ` [PATCH 20/25] make irq_desc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 22/25] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 23/25] x86: use dyn_array in io_apic_xx.c Yinghai Lu
2008-08-03 2:59 ` [PATCH 24/25] x86: get mp_irqs from madt Yinghai Lu
2008-08-03 2:59 ` [PATCH 25/25] x86: remove nr_irq_vectors Yinghai Lu
2008-08-03 13:03 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Alan Cox
2008-08-03 15:14 ` Alan Cox
2008-08-03 19:57 ` Eric W. Biederman
2008-08-04 14:17 ` Alan Cox
2008-08-04 18:13 ` Yinghai Lu
2008-08-04 18:51 ` Eric W. Biederman
2008-08-06 13:09 ` [PATCH] serial: Remove NR_IRQS usage Alan Cox
2008-08-06 16:10 ` Eric W. Biederman
2008-08-03 13:02 ` [PATCH 15/25] drivers/serial to use nr_irqs Alan Cox
2008-08-03 17:43 ` Yinghai Lu
2008-08-03 4:16 ` [PATCH 05/25] x86: alloc dyn_array all alltogether Johannes Weiner
2008-08-03 4:03 ` [PATCH 03/25] add dyn_array support Johannes Weiner
2008-08-03 4:21 ` Yinghai Lu
2008-08-03 4:55 ` Johannes Weiner
2008-08-03 5:04 ` Yinghai Lu
2008-08-03 5:31 ` Johannes Weiner
2008-08-03 5:39 ` Yinghai Lu
2008-08-03 5:40 ` Yinghai Lu
2008-08-03 5:47 ` Johannes Weiner
2008-08-03 5:48 ` Yinghai Lu
2008-08-03 5:51 ` [PATCH 00/25] dyn_array and nr_irqs support v3 Eric W. Biederman
2008-08-03 6:04 ` Yinghai Lu
2008-08-03 6:39 ` Eric W. Biederman
2008-08-03 8:25 ` Yinghai Lu
2008-08-03 9:15 ` Eric W. Biederman
2008-08-03 17:54 ` Yinghai Lu
2008-08-03 19:20 ` Yinghai Lu
2008-08-04 1:59 ` Yinghai Lu
2008-08-04 14:31 ` Mike Travis
2008-08-05 23:01 ` H. Peter Anvin
2008-08-05 23:15 ` Yinghai Lu
2008-08-05 23:26 ` H. Peter Anvin
2008-08-05 23:53 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217732365-16595-6-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dhaval@linux.vnet.ibm.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.