From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH] x86: move nonx_setup etc from common.c to init_64.c
Date: Fri, 5 Sep 2008 00:58:28 -0700 [thread overview]
Message-ID: <1220601508-16360-1-git-send-email-yhlu.kernel@gmail.com> (raw)
like 32 bit put it in init_32.c
Signed-off-by: Yinghai <yhlu.kernel@gmail.com>
---
arch/x86/kernel/cpu/common.c | 54 -------------------------------------------
arch/x86/mm/init_64.c | 54 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+), 54 deletions(-)
Index: linux-2.6/arch/x86/kernel/cpu/common.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/cpu/common.c
+++ linux-2.6/arch/x86/kernel/cpu/common.c
@@ -847,51 +847,6 @@ struct desc_ptr idt_descr = { 256 * 16 -
char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on Enable(default)
-off Disable
-*/
-static int __init nonx_setup(char *str)
-{
- if (!str)
- return -EINVAL;
- if (!strncmp(str, "on", 2)) {
- __supported_pte_mask |= _PAGE_NX;
- do_not_nx = 0;
- } else if (!strncmp(str, "off", 3)) {
- do_not_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- }
- return 0;
-}
-early_param("noexec", nonx_setup);
-
-int force_personality32;
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
- if (!strcmp(str, "on"))
- force_personality32 &= ~READ_IMPLIES_EXEC;
- else if (!strcmp(str, "off"))
- force_personality32 |= READ_IMPLIES_EXEC;
- return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
void pda_init(int cpu)
{
struct x8664_pda *pda = cpu_pda(cpu);
@@ -957,15 +912,6 @@ void syscall_init(void)
X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
}
-void __cpuinit check_efer(void)
-{
- unsigned long efer;
-
- rdmsrl(MSR_EFER, efer);
- if (!(efer & EFER_NX) || do_not_nx)
- __supported_pte_mask &= ~_PAGE_NX;
-}
-
unsigned long kernel_eflags;
/*
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -88,6 +88,60 @@ early_param("gbpages", parse_direct_gbpa
int after_bootmem;
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/* noexec=on|off
+Control non executable mappings for 64bit processes.
+
+on Enable(default)
+off Disable
+*/
+static int __init nonx_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+ if (!strncmp(str, "on", 2)) {
+ __supported_pte_mask |= _PAGE_NX;
+ do_not_nx = 0;
+ } else if (!strncmp(str, "off", 3)) {
+ do_not_nx = 1;
+ __supported_pte_mask &= ~_PAGE_NX;
+ }
+ return 0;
+}
+early_param("noexec", nonx_setup);
+
+void __cpuinit check_efer(void)
+{
+ unsigned long efer;
+
+ rdmsrl(MSR_EFER, efer);
+ if (!(efer & EFER_NX) || do_not_nx)
+ __supported_pte_mask &= ~_PAGE_NX;
+}
+
+int force_personality32;
+
+/* noexec32=on|off
+Control non executable heap for 32bit processes.
+To control the stack too use noexec=off
+
+on PROT_READ does not imply PROT_EXEC for 32bit processes (default)
+off PROT_READ implies PROT_EXEC
+*/
+static int __init nonx32_setup(char *str)
+{
+ if (!strcmp(str, "on"))
+ force_personality32 &= ~READ_IMPLIES_EXEC;
+ else if (!strcmp(str, "off"))
+ force_personality32 |= READ_IMPLIES_EXEC;
+ return 1;
+}
+__setup("noexec32=", nonx32_setup);
+
/*
* NOTE: This function is marked __ref because it calls __init function
* (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
next reply other threads:[~2008-09-05 7:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-05 7:58 Yinghai Lu [this message]
2008-09-05 8:24 ` [PATCH] x86: move nonx_setup etc from common.c to init_64.c Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1220601508-16360-1-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.