All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] "unable to install hw params" to bluetooth (SCO)	headset (was:	btusb+sco failing to play sound through Jabra BT500v headset)
Date: Fri, 05 Sep 2008 19:00:42 +0200	[thread overview]
Message-ID: <1220634042.6714.89.camel@californication> (raw)
In-Reply-To: <20080905162654.GA17843@lapse.rw.madduck.net>

Hi Martin,

> > don't use headsetd. Use the audio stuff that comes with bluez-utils.
> 
> So I am trying, and I got a little further, installing the right
> lines into .asoundrc as per
> http://wiki.bluez.org/wiki/HOWTO/AudioDevices. I have gotten beyond
> issues of
> 
>   bt_audio_service_open: connect() failed: Connection refused (111)
>   aplay: main:564: audio open error: Connection refused 
> 
> but it still doesn't want to work. If I execute
> 
>   arecord -D bt500v -f S16_LE | aplay -D bt500v -f S16_LE
> 
> then the headset makes a noise, the bluetooth LED flashes and
> arecord prints
> 
>   Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
> 
> But then after about 30 or 40 seconds, it all fails:
> 
>   ALSA lib pcm_bluetooth.c:464:(bluetooth_hsp_hw_params) BT_SETCONFIGURATION failed : Input/output error(5)
>   arecord: set_params:979: Unable to install hw params:
>   ACCESS:  RW_INTERLEAVED
>   FORMAT:  S16_LE
>   SUBFORMAT:  STD
>   SAMPLE_BITS: 16
>   FRAME_BITS: 16
>   CHANNELS: 1
>   RATE: 8000
>   PERIOD_TIME: 125000
>   PERIOD_SIZE: 1000
>   PERIOD_BYTES: 2000
>   PERIODS: 4
>   BUFFER_TIME: 500000
>   BUFFER_SIZE: 4000
>   BUFFER_BYTES: 8000
>   TICK_TIME: [0 0]
>   aplay: playback:2019: read error
> 
> I have bluez-audio installed, but /etc/bluetooth/audio.conf is
> default. No PulseAudio or anything other than plain ALSA here...
> 
> Any clues?

actually I have none. It simply works for me. And I have tested it a
lot. There are some rare conditions where the btusb driver is off on the
16-bit boundaries, but I am looking at a fix for it. However this will
not disturb the audio service. You just don't here anything.

Regards

Marcel



-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2008-09-05 17:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-22  7:36 [Bluez-devel] SCO flowcontrol patch v4.4 on 2.6.25/6 causes hardlocks when connecting to BT device martin f krafft
2008-08-22  8:33 ` Marcel Holtmann
2008-08-26 16:35   ` [Bluez-devel] btusb+sco failing to play sound through Jabra BT500v headset (was: SCO flowcontrol patch v4.4 on 2.6.25/6 causes) " martin f krafft
2008-08-26 17:19     ` Marcel Holtmann
2008-08-26 20:34       ` martin f krafft
2008-08-27  5:18         ` Marcel Holtmann
2008-08-27 21:03           ` martin f krafft
2008-09-05 16:26       ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset (was: btusb+sco failing to play sound through Jabra BT500v headset) martin f krafft
2008-09-05 17:00         ` Marcel Holtmann [this message]
2008-09-08 20:33           ` martin f krafft
2008-09-23 13:00           ` [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset martin f krafft
2008-09-23 13:37             ` Stuart Pook
2008-09-29 21:41             ` SCO headset, bluez-4.9 & linux 2.6.27-rc7 -> Unable to install hw params Stuart Pook
  -- strict thread matches above, loose matches on Subject: below --
2008-09-22 21:03 [Bluez-devel] "unable to install hw params" to bluetooth (SCO) headset (was: btusb+sco failing to play sound through Jabra BT500v headset) Stuart Pook

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1220634042.6714.89.camel@californication \
    --to=marcel@holtmann.org \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.