From: "Alejandro Riveira Fernández" <alejandro.riveira@gmail.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Various OOps with 2.6.27-rc5
Date: Sun, 07 Sep 2008 21:21:36 +0200 [thread overview]
Message-ID: <1220815296.11776.4.camel@Varda> (raw)
[-- Attachment #1: Type: text/plain, Size: 57851 bytes --]
My kernel is tainted so maybe you want to stop reading here.
Linux Varda 2.6.27-rc5 #89 SMP PREEMPT Fri Aug 29 12:43:32 CEST 2008 x86_64 GNU/Linux
Gnu C 4.2.3
Gnu make 3.81
binutils 2.18.0.20080103
util-linux 2.13.1
mount 2.13.1
module-init-tools 3.3-pre11
e2fsprogs 1.40.8
jfsutils 1.1.11
reiserfsprogs 3.6.19
pcmciautils 014
PPP 2.4.4
Linux C Library 2.7
Dynamic linker (ldd) 2.7
Procps 3.2.7
Net-tools 1.60
Kbd [opcion...][archivo
Console-tools 0.2.3
Sh-utils 6.10
udev 117
wireless-tools 29
Modules Loaded binfmt_misc af_packet rfcomm l2cap bluetooth ipv6 pci_slot container powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state nf_conntrack_ipv4 nf_conntrack iptable_filter ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp arc4 snd_hda_intel ecb crypto_blkcipher cryptomgr crypto_algapi snd_pcm_oss snd_mixer_oss snd_mpu401 snd_pcm rt2500pci rt2x00pci rt2x00lib snd_mpu401_uart snd_seq_dummy rfkill snd_seq_oss snd_seq_midi led_class snd_rawmidi snd_seq_midi_event mac80211 evdev cfg80211 k8temp pcspkr eeprom_93cx6 snd_seq usblp nvidia snd_timer snd_seq_device 8250_pnp parport_pc 8250 serial_core parport i2c_ali1535 i2c_ali15x3 snd i2c_core soundcore snd_page_alloc uli526x button sr_mod usbhid ff_memless cdrom floppy sg ata_generic ehci_hcd r8169 ohci_hcd usbcore unix thermal processor fan fuse
00:00.0 Host bridge: ALi Corporation M1697 HTT Host Bridge
00:01.0 PCI bridge: ALi Corporation PCI Express Root Port
00:02.0 PCI bridge: ALi Corporation PCI Express Root Port
00:03.0 PCI bridge: ALi Corporation PCI Express Root Port
00:04.0 PCI bridge: ALi Corporation PCI Express Root Port
00:11.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:12.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 60)
00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:14.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller (rev 01)
00:15.0 ISA bridge: ALi Corporation PCI to LPC Controller (rev 10)
00:15.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:16.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:16.1 SATA controller: ALi Corporation ULi M5288 SATA
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7300 GT] (rev a1)
05:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
05:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
The dmesg including oopses
[ 0.000000] Linux version 2.6.27-rc5 (alex@Varda) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #89 SMP PREEMPT Fri Aug 29 12:43:32 CEST 2008
[ 0.000000] Command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.27-rc5 root=UUID=ee465ea1-394d-4dd2-a5f9-a35567176c40 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffb0000 @ 8000-d000
[ 0.000000] last_map_addr: bffb0000 end: bffb0000
[ 0.000000] RAMDISK: 37c5a000 - 37fef621
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F90F0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BFFB0000, 0040 (r1 A M I OEMRSDT 3000715 MSFT 97)
[ 0.000000] ACPI: FACP BFFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97)
[ 0.000000] ACPI: DSDT BFFB0440, 4B5A (r1 AM2ES AM2ES136 136 INTL 2002026)
[ 0.000000] ACPI: FACS BFFC0000, 0040
[ 0.000000] ACPI: APIC BFFB0390, 0068 (r1 A M I OEMAPIC 3000715 MSFT 97)
[ 0.000000] ACPI: MCFG BFFB0400, 003C (r1 A M I OEMMCFG 3000715 MSFT 97)
[ 0.000000] ACPI: SSDT BFFB4FA0, 002B (r1 OEM_ID OEMTBLID 1 INTL 2002026)
[ 0.000000] ACPI: OEMB BFFC0040, 0056 (r1 A M I AMI_OEM 3000715 MSFT 97)
[ 0.000000] ACPI: HPET BFFB4FD0, 0038 (r1 A M I OEMHPET 3000715 MSFT 97)
[ 0.000000] ACPI: SSDT BFFB5010, 01C4 (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bffb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00005ac84c] TEXT DATA BSS ==> [0000200000 - 00005ac84c]
[ 0.000000] #3 [0037c5a000 - 0037fef621] RAMDISK ==> [0037c5a000 - 0037fef621]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffb0
[ 0.000000] On node 0 totalpages: 786255
[ 0.000000] DMA zone: 2901 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 771561 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-44
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3f380000)
[ 0.000000] PERCPU: Allocating 44804 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774462
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.27-rc5 root=UUID=ee465ea1-394d-4dd2-a5f9-a35567176c40 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 1999.973 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Node 0: aperture @ b52a000000 size 32 MB
[ 0.000999] Aperture beyond 4GB. Ignoring.
[ 0.000999] Memory: 3087520k/3145408k available (2133k kernel code, 56880k reserved, 950k data, 292k init)
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.94 BogoMIPS (lpj=1999973)
[ 0.001036] Mount-cache hash table entries: 256
[ 0.001180] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001182] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001184] tseg: 0000000000
[ 0.001191] CPU: Physical Processor ID: 0
[ 0.001193] CPU: Processor Core ID: 0
[ 0.001202] using C1E aware idle routine
[ 0.001217] ACPI: Core revision 20080609
[ 0.007728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.017987] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.017991] Using local APIC timer interrupts.
[ 0.017998] APIC timer calibration result 12499830
[ 0.018998] Detected 12.499 MHz APIC timer.
[ 0.019112] Booting processor 1/1 ip 6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3999.78 BogoMIPS (lpj=1999894)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.090383] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.090395] Brought up 2 CPUs
[ 0.090398] Total of 2 processors activated (7999.73 BogoMIPS).
[ 0.090518] CPU0 attaching sched-domain:
[ 0.090520] domain 0: span 0-1 level CPU
[ 0.090523] groups: 0 1
[ 0.090528] CPU1 attaching sched-domain:
[ 0.090529] domain 0: span 0-1 level CPU
[ 0.090532] groups: 1 0
[ 0.090827] net_namespace: 1440 bytes
[ 0.090988] NET: Registered protocol family 16
[ 0.091164] No dock devices found.
[ 0.091256] node 0 link 0: io port [1000, ffffff]
[ 0.091259] TOM: 00000000c0000000 aka 3072M
[ 0.091262] node 0 link 0: mmio [e0000000, efffffff]
[ 0.091265] node 0 link 0: mmio [a0000, bffff]
[ 0.091268] node 0 link 0: mmio [c0000000, ffffffff]
[ 0.091271] bus: [00,ff] on node 0 link 0
[ 0.091273] bus: 00 index 0 io port: [0, ffff]
[ 0.091275] bus: 00 index 1 mmio: [c0000000, fcffffffff]
[ 0.091278] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.091284] ACPI: bus type pci registered
[ 0.091380] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.091383] PCI: Not using MMCONFIG.
[ 0.091385] PCI: Using configuration type 1 for base access
[ 0.092855] ACPI: EC: Look up EC in DSDT
[ 0.102013] ACPI: Interpreter enabled
[ 0.102015] ACPI: (supports S0 S1 S3 S5)
[ 0.102029] ACPI: Using IOAPIC for interrupt routing
[ 0.102085] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.106893] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.112638] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.122003] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.122121] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.122125] pci 0000:00:01.0: PME# disabled
[ 0.122151] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.122154] pci 0000:00:02.0: PME# disabled
[ 0.122180] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.122183] pci 0000:00:03.0: PME# disabled
[ 0.122209] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.122212] pci 0000:00:04.0: PME# disabled
[ 0.122282] pci 0000:00:12.0: PME# supported from D3hot D3cold
[ 0.122286] pci 0000:00:12.0: PME# disabled
[ 0.122424] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[ 0.122428] pci 0000:00:13.3: PME# disabled
[ 0.122475] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.122478] pci 0000:00:14.0: PME# disabled
[ 0.122564] pci 0000:00:15.1: quirk: region 4000-403f claimed by ali7101 ACPI
[ 0.122660] pci 0000:00:16.1: PME# supported from D3hot
[ 0.122663] pci 0000:00:16.1: PME# disabled
[ 0.122797] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
[ 0.122800] PCI: bridge 0000:00:01.0 32bit mmio: [dc000000, deefffff]
[ 0.122803] PCI: bridge 0000:00:01.0 32bit mmio pref: [c0000000, cfffffff]
[ 0.122826] PCI: bridge 0000:00:02.0 32bit mmio pref: [dad00000, dadfffff]
[ 0.122849] PCI: bridge 0000:00:03.0 32bit mmio pref: [dae00000, daefffff]
[ 0.122871] PCI: bridge 0000:00:04.0 32bit mmio pref: [daf00000, daffffff]
[ 0.123006] pci 0000:05:0b.0: supports D1
[ 0.123008] pci 0000:05:0b.0: supports D2
[ 0.123010] pci 0000:05:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.123014] pci 0000:05:0b.0: PME# disabled
[ 0.123039] PCI: bridge 0000:00:11.0 io port: [e000, efff]
[ 0.123042] PCI: bridge 0000:00:11.0 32bit mmio: [def00000, deffffff]
[ 0.123056] bus 00 -> node 0
[ 0.123062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[ 0.123422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[ 0.123528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[ 0.123634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
[ 0.123740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT]
[ 0.136138] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.136322] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.136505] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.136687] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.136871] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.137059] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *10 11 12 14 15)
[ 0.137241] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.137418] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled.
[ 0.137601] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.137791] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 52, should be 25 [20080609]
[ 0.137808] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.137839] pnp: PnP ACPI init
[ 0.137846] ACPI: bus type pnp registered
[ 0.143268] pnp: PnP ACPI: found 16 devices
[ 0.143270] ACPI: ACPI bus type pnp unregistered
[ 0.143449] SCSI subsystem initialized
[ 0.143521] libata version 3.00 loaded.
[ 0.143717] PCI: Using ACPI for IRQ routing
[ 0.151153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.151158] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.152007] ACPI: RTC can wake from S4
[ 0.152987] Switched to high resolution mode on CPU 0
[ 0.153338] Switched to high resolution mode on CPU 1
[ 0.162027] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.162030] system 00:08: ioport range 0x4000-0x40bf could not be reserved
[ 0.162033] system 00:08: ioport range 0x40c0-0x40df has been reserved
[ 0.162036] system 00:08: ioport range 0x400-0x40f has been reserved
[ 0.162039] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.162043] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.162046] system 00:08: iomem range 0xfec10000-0xfec10fff has been reserved
[ 0.162049] system 00:08: iomem range 0xfe000000-0xfe0000ff has been reserved
[ 0.162055] system 00:0a: iomem range 0xff380000-0xffffffff could not be reserved
[ 0.162058] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.162061] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.162068] system 00:0d: ioport range 0x290-0x29f has been reserved
[ 0.162077] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.162083] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.162086] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.162089] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.162092] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.162732] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.162735] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.162739] pci 0000:00:01.0: MEM window: 0xdc000000-0xdeefffff
[ 0.162743] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.162747] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.162749] pci 0000:00:02.0: IO window: disabled
[ 0.162752] pci 0000:00:02.0: MEM window: disabled
[ 0.162755] pci 0000:00:02.0: PREFETCH window: 0x000000dad00000-0x000000dadfffff
[ 0.162760] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.162762] pci 0000:00:03.0: IO window: disabled
[ 0.162765] pci 0000:00:03.0: MEM window: disabled
[ 0.162768] pci 0000:00:03.0: PREFETCH window: 0x000000dae00000-0x000000daefffff
[ 0.162772] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04
[ 0.162774] pci 0000:00:04.0: IO window: disabled
[ 0.162777] pci 0000:00:04.0: MEM window: disabled
[ 0.162780] pci 0000:00:04.0: PREFETCH window: 0x000000daf00000-0x000000daffffff
[ 0.162785] pci 0000:00:11.0: PCI bridge, secondary bus 0000:05
[ 0.162788] pci 0000:00:11.0: IO window: 0xe000-0xefff
[ 0.162792] pci 0000:00:11.0: MEM window: 0xdef00000-0xdeffffff
[ 0.162795] pci 0000:00:11.0: PREFETCH window: disabled
[ 0.162809] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 0.162813] pci 0000:00:01.0: setting latency timer to 64
[ 0.162819] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 0.162822] pci 0000:00:02.0: setting latency timer to 64
[ 0.162828] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39
[ 0.162831] pci 0000:00:03.0: setting latency timer to 64
[ 0.162836] pci 0000:00:04.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 0.162840] pci 0000:00:04.0: setting latency timer to 64
[ 0.162845] pci 0000:00:11.0: setting latency timer to 64
[ 0.162848] bus: 00 index 0 io port: [0, ffff]
[ 0.162850] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.162853] bus: 01 index 0 io port: [d000, dfff]
[ 0.162855] bus: 01 index 1 mmio: [dc000000, deefffff]
[ 0.162858] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.162860] bus: 01 index 3 mmio: [0, 0]
[ 0.162862] bus: 02 index 0 mmio: [0, 0]
[ 0.162864] bus: 02 index 1 mmio: [0, 0]
[ 0.162866] bus: 02 index 2 mmio: [dad00000, dadfffff]
[ 0.162869] bus: 02 index 3 mmio: [0, 0]
[ 0.162871] bus: 03 index 0 mmio: [0, 0]
[ 0.162873] bus: 03 index 1 mmio: [0, 0]
[ 0.162875] bus: 03 index 2 mmio: [dae00000, daefffff]
[ 0.162877] bus: 03 index 3 mmio: [0, 0]
[ 0.162880] bus: 04 index 0 mmio: [0, 0]
[ 0.162882] bus: 04 index 1 mmio: [0, 0]
[ 0.162884] bus: 04 index 2 mmio: [daf00000, daffffff]
[ 0.162886] bus: 04 index 3 mmio: [0, 0]
[ 0.162888] bus: 05 index 0 io port: [e000, efff]
[ 0.162891] bus: 05 index 1 mmio: [def00000, deffffff]
[ 0.162893] bus: 05 index 2 mmio: [0, 0]
[ 0.162895] bus: 05 index 3 mmio: [0, 0]
[ 0.162905] NET: Registered protocol family 2
[ 0.198065] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.199129] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.201731] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.202377] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.202381] TCP reno registered
[ 0.214180] checking if image is initramfs... it is
[ 0.494761] Freeing initrd memory: 3669k freed
[ 0.501564] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.505032] msgmni has been set to 6038
[ 0.505326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.505329] io scheduler noop registered
[ 0.505331] io scheduler anticipatory registered (default)
[ 0.505346] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.505362] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.505374] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 0.505386] pci 0000:00:03.0: Enabling HT MSI Mapping
[ 0.505398] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 0.538070] pci 0000:01:00.0: Boot video device
[ 0.538191] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.538214] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.538235] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.538295] pci_express 0000:00:01.0:pcie01: allocate port service
[ 0.538344] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.538423] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.538445] pcieport-driver 0000:00:02.0: found MSI capability
[ 0.538463] pci_express 0000:00:02.0:pcie00: allocate port service
[ 0.538512] pci_express 0000:00:02.0:pcie01: allocate port service
[ 0.538561] pci_express 0000:00:02.0:pcie03: allocate port service
[ 0.538639] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.538661] pcieport-driver 0000:00:03.0: found MSI capability
[ 0.538678] pci_express 0000:00:03.0:pcie00: allocate port service
[ 0.538727] pci_express 0000:00:03.0:pcie01: allocate port service
[ 0.538777] pci_express 0000:00:03.0:pcie03: allocate port service
[ 0.538859] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.538881] pcieport-driver 0000:00:04.0: found MSI capability
[ 0.538898] pci_express 0000:00:04.0:pcie00: allocate port service
[ 0.538947] pci_express 0000:00:04.0:pcie01: allocate port service
[ 0.538996] pci_express 0000:00:04.0:pcie03: allocate port service
[ 0.541723] aer 0000:00:01.0:pcie01: service driver aer loaded
[ 0.544282] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 0.546825] aer 0000:00:03.0:pcie01: service driver aer loaded
[ 0.549387] aer 0000:00:04.0:pcie01: service driver aer loaded
[ 0.552998] hpet_resources: 0xfed00000 is busy
[ 0.553087] Linux agpgart interface v0.103
[ 0.554841] brd: module loaded
[ 0.554892] Driver 'sd' needs updating - please use bus_type methods
[ 0.554963] ahci 0000:00:16.1: version 3.0
[ 0.554978] ahci 0000:00:16.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.555069] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.555073] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 0.555487] scsi0 : ahci
[ 0.555662] scsi1 : ahci
[ 0.555782] scsi2 : ahci
[ 0.555906] scsi3 : ahci
[ 0.556072] ata1: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef500 irq 21
[ 0.556075] ata2: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef580 irq 21
[ 0.556078] ata3: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef600 irq 21
[ 0.556081] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
[ 0.860020] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.176018] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.492018] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.379017] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.380005] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 2.380005] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.380005] ata4.00: configured for UDMA/133
[ 1.501006] isa bounce pool size: 16 pages
[ 1.501006] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.501006] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 1.501006] sd 3:0:0:0: [sda] Write Protect is off
[ 1.501006] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.501006] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501006] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 1.501006] sd 3:0:0:0: [sda] Write Protect is off
[ 1.501006] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.501006] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501006] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.551503] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.551701] pata_ali 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.551826] scsi4 : pata_ali
[ 2.551953] scsi5 : pata_ali
[ 2.554157] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.554160] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.561255] ata5.00: ATA-6: ST3160021A, 8.01, max UDMA/100
[ 2.561255] ata5.00: 312581808 sectors, multi 16: LBA48
[ 2.561255] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 2.561255] ata5.01: 160086528 sectors, multi 16: LBA
[ 2.886500] ata5.00: configured for UDMA/100
[ 2.892444] ata5.01: configured for UDMA/133
[ 3.046366] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
[ 3.046375] ata6.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 3.046378] ata6.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 3.052305] ata6.00: configured for UDMA/33
[ 3.001006] scsi 4:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
[ 3.001006] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 3.001006] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.001006] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.001006] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.001006] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 3.001006] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.001006] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.001006] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.001006] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[ 3.100274] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.100434] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 3.100613] sd 4:0:1:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
[ 3.100631] sd 4:0:1:0: [sdc] Write Protect is off
[ 3.100634] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.100665] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.100720] sd 4:0:1:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
[ 3.100737] sd 4:0:1:0: [sdc] Write Protect is off
[ 3.100740] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.100771] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.100774] sdc: sdc1 sdc2 sdc3
[ 3.108271] sd 4:0:1:0: [sdc] Attached SCSI disk
[ 3.109254] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5
[ 3.109254] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.109254] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.110529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.110676] mice: PS/2 mouse device common for all mice
[ 3.118255] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.145390] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.145419] rtc0: alarms up to one month, hpet irqs
[ 3.145462] cpuidle: using governor ladder
[ 3.145464] cpuidle: using governor menu
[ 3.145883] TCP cubic registered
[ 3.145885] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 3.145888] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 3.145891] ieee80211_crypt: registered algorithm 'NULL'
[ 3.146043] registered taskstats version 1
[ 3.146204] rtc_cmos 00:02: setting system clock to 2008-09-07 09:58:14 UTC (1220781494)
[ 3.146239] Freeing unused kernel memory: 292k freed
[ 3.146376] Write protecting the kernel read-only data: 2876k
[ 4.309420] fuse init (API version 7.9)
[ 4.321946] ACPI: duty_cycle spans bit 4
[ 4.322030] processor ACPI0007:00: registered as cooling_device0
[ 4.322099] processor ACPI0007:01: registered as cooling_device1
[ 4.329614] NET: Registered protocol family 1
[ 4.464932] usbcore: registered new interface driver usbfs
[ 4.464969] usbcore: registered new interface driver hub
[ 4.468626] usbcore: registered new device driver usb
[ 4.470328] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.470360] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.470376] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.470424] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.470458] ohci_hcd 0000:00:13.0: irq 17, io mem 0xdbfee000
[ 4.500100] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 4.500131] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.500157] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 4.500188] scsi 5:0:0:0: Attached scsi generic sg3 type 5
[ 4.524137] usb usb1: configuration #1 chosen from 1 choice
[ 4.524167] hub 1-0:1.0: USB hub found
[ 4.524178] hub 1-0:1.0: 3 ports detected
[ 4.556420] Floppy drive(s): fd0 is 1.44M
[ 4.571138] FDC 0 is a post-1991 82077
[ 4.726213] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4.726231] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.726259] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 4.726292] ohci_hcd 0000:00:13.1: irq 18, io mem 0xdbfed000
[ 4.779101] usb usb2: configuration #1 chosen from 1 choice
[ 4.779130] hub 2-0:1.0: USB hub found
[ 4.779141] hub 2-0:1.0: 3 ports detected
[ 4.838271] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 4.880204] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.880219] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 4.880248] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 4.880280] ohci_hcd 0000:00:13.2: irq 19, io mem 0xdbfec000
[ 4.933094] usb usb3: configuration #1 chosen from 1 choice
[ 4.933126] hub 3-0:1.0: USB hub found
[ 4.933136] hub 3-0:1.0: 3 ports detected
[ 4.993255] usb 1-2: configuration #1 chosen from 1 choice
[ 5.135309] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.135322] ehci_hcd 0000:00:13.3: EHCI Host Controller
[ 5.135349] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 5.156019] ehci_hcd 0000:00:13.3: debug port 1
[ 5.156043] ehci_hcd 0000:00:13.3: irq 23, io mem 0xdbfef800
[ 5.248018] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 5.254014] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.254082] usb usb4: configuration #1 chosen from 1 choice
[ 5.254113] hub 4-0:1.0: USB hub found
[ 5.254120] hub 4-0:1.0: 8 ports detected
[ 5.307020] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 5.457581] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.457601] r8169 0000:05:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.457894] eth0: RTL8110s at 0xffffc2000003ac00, 00:4f:63:00:a4:73, XID 04000000 IRQ 19
[ 5.511322] Driver 'sr' needs updating - please use bus_type methods
[ 5.515307] usb 1-2: USB disconnect, address 2
[ 5.516150] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 5.516155] Uniform CD-ROM driver Revision: 3.20
[ 5.516279] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.634006] usbcore: registered new interface driver hiddev
[ 5.885272] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 6.019256] usb 1-2: configuration #1 chosen from 1 choice
[ 6.257272] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 6.431377] usb 3-2: configuration #1 chosen from 1 choice
[ 6.440398] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input1
[ 6.448066] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:13.0-2
[ 6.448090] usbcore: registered new interface driver usbhid
[ 6.448094] usbhid: v2.6:USB HID core driver
[ 13.958683] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.967736] ACPI: Power Button (FF) [PWRF]
[ 13.967925] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.975270] ACPI: Power Button (CM) [PWRB]
[ 13.978874] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 13.985771] uli526x 0000:00:12.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 14.040316] eth1: ULi M5263 at pci0000:00:12.0, 00:13:8f:b3:14:a4, irq 20.
[ 14.116119] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 14.116125] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted.
[ 14.119669] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 14.119673] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted.
[ 14.141705] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 14.141824] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.149286] parport_pc 00:06: reported by Plug and Play ACPI
[ 14.149343] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 14.232336] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.366644] nvidia: module license 'NVIDIA' taints kernel.
[ 14.399129] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
[ 14.399161] usbcore: registered new interface driver usblp
[ 14.459044] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.712101] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[ 14.712109] nvidia 0000:01:00.0: setting latency timer to 64
[ 14.712323] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.67 Mon Aug 11 12:04:28 PDT 2008
[ 14.886166] udev: renamed network interface eth1 to eth0
[ 14.931021] rt2500pci 0000:05:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.935258] udev: renamed network interface eth0_rename to eth1
[ 14.946997] phy0: Selected rate control algorithm 'pid'
[ 15.340055] Registered led device: rt2500pci-phy0:radio
[ 15.340106] HDA Intel 0000:00:14.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 15.349245] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 16.577947] lp0: using parport0 (interrupt-driven).
[ 16.594512] w83627ehf: Found W83627EHG chip at 0x290
[ 16.726676] Adding 1992020k swap on /dev/sdb7. Priority:1 extents:1 across:1992020k
[ 16.738255] Adding 1020116k swap on /dev/sdc2. Priority:1 extents:1 across:1020116k
[ 19.115787] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.386888] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.388141] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[ 20.388145] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 20.388147] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 21.675227] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[ 21.675858] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
[ 21.675862] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
[ 21.675865] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 23.709091] NET: Registered protocol family 10
[ 23.710385] lo: Disabled Privacy Extensions
[ 23.933841] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 26.000025] Clocksource tsc unstable (delta = -208039769 ns)
[ 30.968234] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.991926] r8169: eth1: link down
[ 30.991974] r8169: eth1: link down
[ 30.993666] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 31.036163] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.103350] Bluetooth: Core ver 2.12
[ 31.105980] NET: Registered protocol family 31
[ 31.107044] Bluetooth: HCI device and connection manager initialized
[ 31.108379] Bluetooth: HCI socket layer initialized
[ 31.142564] Bluetooth: L2CAP ver 2.10
[ 31.143526] Bluetooth: L2CAP socket layer initialized
[ 31.156615] Bluetooth: RFCOMM socket layer initialized
[ 31.156653] Bluetooth: RFCOMM TTY layer initialized
[ 31.156658] Bluetooth: RFCOMM ver 1.10
[ 33.328478] NET: Registered protocol family 17
[ 33.966851] uli526x: eth0 NIC Link is Down
[ 188.248690] wlan0: authenticate with AP 00:80:5a:31:90:db
[ 188.250531] wlan0: authenticated
[ 188.250919] wlan0: associate with AP 00:80:5a:31:90:db
[ 188.254192] wlan0: RX AssocResp from 00:80:5a:31:90:db (capab=0x471 status=0 aid=2)
[ 188.255053] wlan0: associated
[ 188.256657] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 205.915260] wlan0: no IPv6 routers present
[20979.842035] INFO: task pdflush:198 blocked for more than 120 seconds.
[20979.842048] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[20979.842053] pdflush D ffffffff8025b1b7 0 198 2
[20979.842065] ffff8800be06dab0 0000000000000046 0000000000000000 00000010bdeff780
[20979.842074] ffff880041c788c0 ffff8800be06da60 ffffffff805635c0 ffffffff805635c0
[20979.842081] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[20979.842088] Call Trace:
[20979.842102] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[20979.842111] [<ffffffff8025b1b7>] sync_page+0x0/0x41
[20979.842119] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[20979.842126] [<ffffffff8025b1f3>] sync_page+0x3c/0x41
[20979.842131] [<ffffffff80410f4b>] __wait_on_bit+0x40/0x6e
[20979.842137] [<ffffffff8025b405>] wait_on_page_bit+0x6c/0x72
[20979.842145] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[20979.842152] [<ffffffff802e49d4>] txLock+0x23d/0x5e5
[20979.842161] [<ffffffff802faa9c>] attempt_merge+0x380/0x3c2
[20979.842168] [<ffffffff802d482a>] diWrite+0x13a/0x43a
[20979.842175] [<ffffffff802e2d7f>] txCommit+0x1cf/0xeb5
[20979.842182] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[20979.842189] [<ffffffff802cbee4>] jfs_write_inode+0x31/0x41
[20979.842197] [<ffffffff80299e89>] __writeback_single_inode+0x186/0x2a0
[20979.842207] [<ffffffff8022770f>] pick_next_task_fair+0x90/0x9f
[20979.842213] [<ffffffff8029a376>] generic_sync_sb_inodes+0x1cf/0x2d8
[20979.842221] [<ffffffff8029a649>] writeback_inodes+0x5c/0xa8
[20979.842229] [<ffffffff80261916>] wb_kupdate+0xa0/0x113
[20979.842236] [<ffffffff80261cb2>] pdflush+0x0/0x204
[20979.842242] [<ffffffff80261e05>] pdflush+0x153/0x204
[20979.842249] [<ffffffff80261876>] wb_kupdate+0x0/0x113
[20979.842256] [<ffffffff80242553>] kthread+0x47/0x74
[20979.842263] [<ffffffff8022cc6f>] schedule_tail+0x28/0x61
[20979.842270] [<ffffffff8020c2f9>] child_rip+0xa/0x11
[20979.842276] [<ffffffff8024250c>] kthread+0x0/0x74
[20979.842281] [<ffffffff8020c2ef>] child_rip+0x0/0x11
[20979.842284]
[20979.842333] INFO: task deluge:8943 blocked for more than 120 seconds.
[20979.842338] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[20979.842342] deluge D ffff88003668d000 0 8943 1
[20979.842351] ffff880051cc9898 0000000000000082 0000000000000200 ffff880051cc9828
[20979.842358] ffff8800bf844540 ffff880051cc9848 ffffffff805635c0 ffffffff805635c0
[20979.842366] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[20979.842372] Call Trace:
[20979.842380] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[20979.842386] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[20979.842392] [<ffffffff802e1b55>] lmGroupCommit+0x113/0x15f
[20979.842399] [<ffffffff8022a3ee>] default_wake_function+0x0/0xe
[20979.842406] [<ffffffff802e38c0>] txCommit+0xd10/0xeb5
[20979.842413] [<ffffffff80306711>] __up_read+0x13/0x8a
[20979.842420] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[20979.842427] [<ffffffff802decd1>] extAlloc+0x374/0x3c1
[20979.842435] [<ffffffff802cc13f>] jfs_get_block+0x162/0x22f
[20979.842442] [<ffffffff802a0820>] nobh_write_begin+0x214/0x421
[20979.842449] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[20979.842455] [<ffffffff802cbb80>] jfs_write_begin+0x1b/0x20
[20979.842462] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[20979.842467] [<ffffffff8025bcc8>] generic_file_buffered_write+0x147/0x686
[20979.842474] [<ffffffff802e64a4>] jfs_getxattr+0xd/0x12
[20979.842482] [<ffffffff80234fcd>] current_fs_time+0x1e/0x24
[20979.842489] [<ffffffff8029a774>] __mark_inode_dirty+0xdf/0x187
[20979.842496] [<ffffffff8025c6ef>] __generic_file_aio_write_nolock+0x342/0x376
[20979.842504] [<ffffffff8025c787>] generic_file_aio_write+0x64/0xc4
[20979.842513] [<ffffffff8027e982>] do_sync_write+0xd1/0x118
[20979.842520] [<ffffffff80242670>] autoremove_wake_function+0x0/0x2e
[20979.842526] [<ffffffff80410a2a>] thread_return+0x6a/0xbd
[20979.842535] [<ffffffff8027f0fb>] vfs_write+0xad/0x143
[20979.842541] [<ffffffff8027f5c0>] sys_write+0x45/0x6e
[20979.842549] [<ffffffff8020b3db>] system_call_fastpath+0x16/0x1b
[20979.842553]
[21112.986033] INFO: task pdflush:198 blocked for more than 120 seconds.
[21112.986046] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21112.986052] pdflush D ffffffff8025b1b7 0 198 2
[21112.986063] ffff8800be06dab0 0000000000000046 0000000000000000 00000010bdeff780
[21112.986072] ffff880041c788c0 ffff8800be06da60 ffffffff805635c0 ffffffff805635c0
[21112.986082] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21112.986092] Call Trace:
[21112.986107] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21112.986116] [<ffffffff8025b1b7>] sync_page+0x0/0x41
[21112.986125] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21112.986132] [<ffffffff8025b1f3>] sync_page+0x3c/0x41
[21112.986138] [<ffffffff80410f4b>] __wait_on_bit+0x40/0x6e
[21112.986146] [<ffffffff8025b405>] wait_on_page_bit+0x6c/0x72
[21112.986154] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[21112.986162] [<ffffffff802e49d4>] txLock+0x23d/0x5e5
[21112.986171] [<ffffffff802faa9c>] attempt_merge+0x380/0x3c2
[21112.986179] [<ffffffff802d482a>] diWrite+0x13a/0x43a
[21112.986186] [<ffffffff802e2d7f>] txCommit+0x1cf/0xeb5
[21112.986194] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[21112.986201] [<ffffffff802cbee4>] jfs_write_inode+0x31/0x41
[21112.986210] [<ffffffff80299e89>] __writeback_single_inode+0x186/0x2a0
[21112.986220] [<ffffffff8022770f>] pick_next_task_fair+0x90/0x9f
[21112.986228] [<ffffffff8029a376>] generic_sync_sb_inodes+0x1cf/0x2d8
[21112.986236] [<ffffffff8029a649>] writeback_inodes+0x5c/0xa8
[21112.986244] [<ffffffff80261916>] wb_kupdate+0xa0/0x113
[21112.986252] [<ffffffff80261cb2>] pdflush+0x0/0x204
[21112.986258] [<ffffffff80261e05>] pdflush+0x153/0x204
[21112.986265] [<ffffffff80261876>] wb_kupdate+0x0/0x113
[21112.986272] [<ffffffff80242553>] kthread+0x47/0x74
[21112.986281] [<ffffffff8022cc6f>] schedule_tail+0x28/0x61
[21112.986289] [<ffffffff8020c2f9>] child_rip+0xa/0x11
[21112.986296] [<ffffffff8024250c>] kthread+0x0/0x74
[21112.986303] [<ffffffff8020c2ef>] child_rip+0x0/0x11
[21112.986307]
[21112.986355] INFO: task deluge:8943 blocked for more than 120 seconds.
[21112.986361] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21112.986366] deluge D ffff88003668d000 0 8943 1
[21112.986378] ffff880051cc9898 0000000000000082 0000000000000200 ffff880051cc9828
[21112.986390] ffff8800bf844540 ffff880051cc9848 ffffffff805635c0 ffffffff805635c0
[21112.986402] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21112.986413] Call Trace:
[21112.986421] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21112.986428] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21112.986435] [<ffffffff802e1b55>] lmGroupCommit+0x113/0x15f
[21112.986443] [<ffffffff8022a3ee>] default_wake_function+0x0/0xe
[21112.986450] [<ffffffff802e38c0>] txCommit+0xd10/0xeb5
[21112.986459] [<ffffffff80306711>] __up_read+0x13/0x8a
[21112.986467] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[21112.986475] [<ffffffff802decd1>] extAlloc+0x374/0x3c1
[21112.986483] [<ffffffff802cc13f>] jfs_get_block+0x162/0x22f
[21112.986491] [<ffffffff802a0820>] nobh_write_begin+0x214/0x421
[21112.986498] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21112.986506] [<ffffffff802cbb80>] jfs_write_begin+0x1b/0x20
[21112.986513] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21112.986521] [<ffffffff8025bcc8>] generic_file_buffered_write+0x147/0x686
[21112.986529] [<ffffffff802e64a4>] jfs_getxattr+0xd/0x12
[21112.986537] [<ffffffff80234fcd>] current_fs_time+0x1e/0x24
[21112.986545] [<ffffffff8029a774>] __mark_inode_dirty+0xdf/0x187
[21112.986553] [<ffffffff8025c6ef>] __generic_file_aio_write_nolock+0x342/0x376
[21112.986561] [<ffffffff8025c787>] generic_file_aio_write+0x64/0xc4
[21112.986571] [<ffffffff8027e982>] do_sync_write+0xd1/0x118
[21112.986579] [<ffffffff80242670>] autoremove_wake_function+0x0/0x2e
[21112.986586] [<ffffffff80410a2a>] thread_return+0x6a/0xbd
[21112.986595] [<ffffffff8027f0fb>] vfs_write+0xad/0x143
[21112.986603] [<ffffffff8027f5c0>] sys_write+0x45/0x6e
[21112.986611] [<ffffffff8020b3db>] system_call_fastpath+0x16/0x1b
[21112.986616]
[21146.272045] INFO: task syslogd:3966 blocked for more than 120 seconds.
[21146.272057] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21146.272063] syslogd D ffffffff8029e5d9 0 3966 1
[21146.272074] ffff8800bae43978 0000000000000082 ffff8800bfa3f400 ffffffff803006f0
[21146.272083] ffff8800bd9deab0 ffff8800bae43928 ffffffff805635c0 ffffffff805635c0
[21146.272091] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21146.272102] Call Trace:
[21146.272117] [<ffffffff803006f0>] as_add_request+0xc4/0x100
[21146.272128] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21146.272138] [<ffffffff8029e5d9>] sync_buffer+0x0/0x3f
[21146.272147] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21146.272155] [<ffffffff8029e614>] sync_buffer+0x3b/0x3f
[21146.272162] [<ffffffff80410f4b>] __wait_on_bit+0x40/0x6e
[21146.272170] [<ffffffff8029e5d9>] sync_buffer+0x0/0x3f
[21146.272177] [<ffffffff80410fe5>] out_of_line_wait_on_bit+0x6c/0x78
[21146.272185] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[21146.272193] [<ffffffff802a0982>] nobh_write_begin+0x376/0x421
[21146.272201] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21146.272209] [<ffffffff802cbb80>] jfs_write_begin+0x1b/0x20
[21146.272216] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21146.272224] [<ffffffff8025bcc8>] generic_file_buffered_write+0x147/0x686
[21146.272233] [<ffffffff802e64a4>] jfs_getxattr+0xd/0x12
[21146.272242] [<ffffffff80234fcd>] current_fs_time+0x1e/0x24
[21146.272250] [<ffffffff8029a774>] __mark_inode_dirty+0xdf/0x187
[21146.272258] [<ffffffff8025c6ef>] __generic_file_aio_write_nolock+0x342/0x376
[21146.272264] [<ffffffff8028e72b>] __d_lookup+0x110/0x122
[21146.272272] [<ffffffff80285cb8>] do_lookup+0x63/0x1c1
[21146.272280] [<ffffffff8025c787>] generic_file_aio_write+0x64/0xc4
[21146.272287] [<ffffffff8025c723>] generic_file_aio_write+0x0/0xc4
[21146.272297] [<ffffffff8027e868>] do_sync_readv_writev+0xc2/0x10b
[21146.272306] [<ffffffff802932df>] mntput_no_expire+0x21/0x119
[21146.272314] [<ffffffff80242670>] autoremove_wake_function+0x0/0x2e
[21146.272322] [<ffffffff80286c9e>] getname+0x140/0x181
[21146.272330] [<ffffffff802884de>] user_path_at+0x59/0x7f
[21146.272338] [<ffffffff8027ef10>] do_readv_writev+0xb2/0x16f
[21146.272346] [<ffffffff80281c14>] sys_newstat+0x28/0x31
[21146.272354] [<ffffffff8027f3c7>] sys_writev+0x45/0x93
[21146.272362] [<ffffffff8020b3db>] system_call_fastpath+0x16/0x1b
[21146.272367]
[21179.558077] INFO: task deluge:8940 blocked for more than 120 seconds.
[21179.558089] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21179.558096] deluge D 00000001013c6cd6 0 8940 1
[21179.558107] ffff880095801b28 0000000000000082 0000000000000000 0000000000792c32
[21179.558115] 0000000300000000 ffff880095801ad8 ffffffff805635c0 ffffffff805635c0
[21179.558126] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21179.558137] Call Trace:
[21179.558155] [<ffffffff802df240>] release_metapage+0x124/0x130
[21179.558164] [<ffffffff8025b1b7>] sync_page+0x0/0x41
[21179.558173] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21179.558180] [<ffffffff8025b1f3>] sync_page+0x3c/0x41
[21179.558187] [<ffffffff80410f4b>] __wait_on_bit+0x40/0x6e
[21179.558194] [<ffffffff8025b405>] wait_on_page_bit+0x6c/0x72
[21179.558202] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[21179.558210] [<ffffffff802e49d4>] txLock+0x23d/0x5e5
[21179.558218] [<ffffffff802d95ff>] read_index_page+0x4b/0x55
[21179.558226] [<ffffffff802ddfa6>] dtDelete+0x20a/0x8d4
[21179.558235] [<ffffffff80285cb8>] do_lookup+0x63/0x1c1
[21179.558243] [<ffffffff802857a2>] inode_permission+0x66/0xa9
[21179.558250] [<ffffffff802e2b9e>] txBegin+0x2ac/0x2be
[21179.558257] [<ffffffff80411e35>] __down_write_nested+0x34/0x9e
[21179.558264] [<ffffffff802cc807>] jfs_unlink+0xbf/0x317
[21179.558271] [<ffffffff8028654d>] vfs_unlink+0x5e/0xa3
[21179.558279] [<ffffffff80288007>] do_unlinkat+0xa8/0x135
[21179.558288] [<ffffffff8028a514>] sys_poll+0x35/0x86
[21179.558296] [<ffffffff8020b3db>] system_call_fastpath+0x16/0x1b
[21179.558301]
[21212.844070] INFO: task gtk-window-deco:5253 blocked for more than 120 seconds.
[21212.844083] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21212.844088] gtk-window-de D ffffffff8025b1b7 0 5253 5250
[21212.844099] ffff8800a448bca8 0000000000000086 0000000000000000 ffff8800a448bd48
[21212.844108] ffff88009cb0c080 ffff8800a448bc58 ffffffff805635c0 ffffffff805635c0
[21212.844119] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21212.844129] Call Trace:
[21212.844144] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21212.844154] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21212.844162] [<ffffffff8025b1b7>] sync_page+0x0/0x41
[21212.844171] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21212.844178] [<ffffffff8025b1f3>] sync_page+0x3c/0x41
[21212.844185] [<ffffffff80410e60>] __wait_on_bit_lock+0x3f/0x72
[21212.844192] [<ffffffff8025b1a3>] __lock_page+0x5e/0x64
[21212.844200] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[21212.844207] [<ffffffff8025b33c>] find_lock_page+0x30/0x50
[21212.844215] [<ffffffff8025d29d>] filemap_fault+0x1a2/0x3a5
[21212.844224] [<ffffffff802679c8>] __do_fault+0x54/0x387
[21212.844231] [<ffffffff80269543>] handle_mm_fault+0x373/0x6dd
[21212.844238] [<ffffffff80410a2a>] thread_return+0x6a/0xbd
[21212.844248] [<ffffffff8022038c>] do_page_fault+0x381/0x741
[21212.844258] [<ffffffff8027f24e>] vfs_read+0xbd/0x140
[21212.844265] [<ffffffff80412659>] error_exit+0x0/0x51
[21212.844270]
[21246.130033] INFO: task pdflush:198 blocked for more than 120 seconds.
[21246.130046] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21246.130052] pdflush D ffffffff8025b1b7 0 198 2
[21246.130063] ffff8800be06dab0 0000000000000046 0000000000000000 00000010bdeff780
[21246.130072] ffff880041c788c0 ffff8800be06da60 ffffffff805635c0 ffffffff805635c0
[21246.130083] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21246.130092] Call Trace:
[21246.130107] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21246.130116] [<ffffffff8025b1b7>] sync_page+0x0/0x41
[21246.130125] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21246.130132] [<ffffffff8025b1f3>] sync_page+0x3c/0x41
[21246.130139] [<ffffffff80410f4b>] __wait_on_bit+0x40/0x6e
[21246.130146] [<ffffffff8025b405>] wait_on_page_bit+0x6c/0x72
[21246.130154] [<ffffffff8024269e>] wake_bit_function+0x0/0x23
[21246.130162] [<ffffffff802e49d4>] txLock+0x23d/0x5e5
[21246.130171] [<ffffffff802faa9c>] attempt_merge+0x380/0x3c2
[21246.130180] [<ffffffff802d482a>] diWrite+0x13a/0x43a
[21246.130186] [<ffffffff802e2d7f>] txCommit+0x1cf/0xeb5
[21246.130195] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[21246.130202] [<ffffffff802cbee4>] jfs_write_inode+0x31/0x41
[21246.130211] [<ffffffff80299e89>] __writeback_single_inode+0x186/0x2a0
[21246.130221] [<ffffffff8022770f>] pick_next_task_fair+0x90/0x9f
[21246.130229] [<ffffffff8029a376>] generic_sync_sb_inodes+0x1cf/0x2d8
[21246.130237] [<ffffffff8029a649>] writeback_inodes+0x5c/0xa8
[21246.130245] [<ffffffff80261916>] wb_kupdate+0xa0/0x113
[21246.130253] [<ffffffff80261cb2>] pdflush+0x0/0x204
[21246.130259] [<ffffffff80261e05>] pdflush+0x153/0x204
[21246.130266] [<ffffffff80261876>] wb_kupdate+0x0/0x113
[21246.130273] [<ffffffff80242553>] kthread+0x47/0x74
[21246.130282] [<ffffffff8022cc6f>] schedule_tail+0x28/0x61
[21246.130291] [<ffffffff8020c2f9>] child_rip+0xa/0x11
[21246.130298] [<ffffffff8024250c>] kthread+0x0/0x74
[21246.130305] [<ffffffff8020c2ef>] child_rip+0x0/0x11
[21246.130309]
[21246.130358] INFO: task deluge:8943 blocked for more than 120 seconds.
[21246.130364] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[21246.130369] deluge D ffff88003668d000 0 8943 1
[21246.130380] ffff880051cc9898 0000000000000082 0000000000000200 ffff880051cc9828
[21246.130392] ffff8800bf844540 ffff880051cc9848 ffffffff805635c0 ffffffff805635c0
[21246.130404] ffffffff8055d000 ffffffff8055d000 ffffffff805635c0 ffffffff805635c0
[21246.130414] Call Trace:
[21246.130422] [<ffffffff80246f9e>] getnstimeofday+0x38/0x95
[21246.130429] [<ffffffff80410ce4>] io_schedule+0x5d/0x9f
[21246.130436] [<ffffffff802e1b55>] lmGroupCommit+0x113/0x15f
[21246.130444] [<ffffffff8022a3ee>] default_wake_function+0x0/0xe
[21246.130451] [<ffffffff802e38c0>] txCommit+0xd10/0xeb5
[21246.130459] [<ffffffff80306711>] __up_read+0x13/0x8a
[21246.130467] [<ffffffff802cbc6e>] jfs_commit_inode+0xa9/0xef
[21246.130475] [<ffffffff802decd1>] extAlloc+0x374/0x3c1
[21246.130483] [<ffffffff802cc13f>] jfs_get_block+0x162/0x22f
[21246.130491] [<ffffffff802a0820>] nobh_write_begin+0x214/0x421
[21246.130498] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21246.130506] [<ffffffff802cbb80>] jfs_write_begin+0x1b/0x20
[21246.130513] [<ffffffff802cbfdd>] jfs_get_block+0x0/0x22f
[21246.130520] [<ffffffff8025bcc8>] generic_file_buffered_write+0x147/0x686
[21246.130527] [<ffffffff802e64a4>] jfs_getxattr+0xd/0x12
[21246.130536] [<ffffffff80234fcd>] current_fs_time+0x1e/0x24
[21246.130544] [<ffffffff8029a774>] __mark_inode_dirty+0xdf/0x187
[21246.130551] [<ffffffff8025c6ef>] __generic_file_aio_write_nolock+0x342/0x376
[21246.130559] [<ffffffff8025c787>] generic_file_aio_write+0x64/0xc4
[21246.130569] [<ffffffff8027e982>] do_sync_write+0xd1/0x118
[21246.130577] [<ffffffff80242670>] autoremove_wake_function+0x0/0x2e
[21246.130584] [<ffffffff80410a2a>] thread_return+0x6a/0xbd
[21246.130592] [<ffffffff8027f0fb>] vfs_write+0xad/0x143
[21246.130601] [<ffffffff8027f5c0>] sys_write+0x45/0x6e
[21246.130608] [<ffffffff8020b3db>] system_call_fastpath+0x16/0x1b
[21246.130613]
--
OOP to me means only messaging, local retention and protection and
hiding of state-process, and extreme late-binding of all things. It can
be done in Smalltalk and in LISP. There are possibly other systems in
which this is possible, but I'm not aware of them.
-- Alan Kay --
[-- Attachment #2: Esta parte del mensaje está firmada digitalmente --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next reply other threads:[~2008-09-07 19:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-07 19:21 Alejandro Riveira Fernández [this message]
2008-09-08 19:46 ` Various OOps with 2.6.27-rc5 Randy Dunlap
2008-09-08 20:36 ` Alejandro Riveira Fernández
2008-09-08 20:57 ` Randy Dunlap
2008-09-08 22:21 ` Alejandro Riveira Fernández
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1220815296.11776.4.camel@Varda \
--to=alejandro.riveira@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.