From: Henry Bausley <hbausley@domain.hid>
To: xenomai-help <xenomai@xenomai.org>
Subject: [Xenomai-help] AMCC PowerPC 460EX - error
Date: Tue, 09 Sep 2008 16:40:45 -0700 [thread overview]
Message-ID: <1221003645.5414.26.camel@domain.hid> (raw)
I am getting the following error when I added xenomai 2.4.5 to the Denx
2.6.26-2 kernel. I can still use the O.S. even though I get this error.
However, I'm afraid it is something that may eventually crash my app.
IP-Config: Complete:
device=eth0, addr=10.34.9.214, mask=255.0.0.0, gw=255.255.255.255,
host=canyonlands, domain=, nis-domain=(none),
bootserver=10.34.9.29, rootserver=10.34.9.29, rootpath=
Looking up port of RPC 100003/2 on 10.34.9.29
Looking up port of RPC 100005/1 on 10.34.9.29
NOHZ: local_softirq_pending 08
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 156k init
------------[ cut here ]------------
Badness at c00255d0 [verbose debug info unavailable]
NIP: c00255d0 LR: c0203a74 CTR: 00000000
REGS: ef82b6e0 TRAP: 0700 Not tainted (2.6.26.2)
MSR: 00029000 <EE,ME> CR: 42042048 XER: 00000007
TASK = ef82c000[1] 'swapper' THREAD: ef82a000
GPR00: 00000001 ef82b790 ef82c000 00000000 00000000 00000000 000007b2
00000000
GPR08: 0000000f c0359bc0 0000009e 00000006 00000850 10049ef0 ef82bc6c
ef82bd70
GPR16: 00000000 0a22091d 00000801 00000000 00000000 0a22091d 00000000
00000000
GPR24: 0a22091d 00004000 00000040 efb76e02 00000003 efb85aa0 ef824000
00000000
NIP [c00255d0] local_bh_enable+0x84/0x9c
LR [c0203a74] dev_queue_xmit+0xb8/0x360
Call Trace:
[ef82b790] [efb85aa0] 0xefb85aa0 (unreliable)
[ef82b7a0] [c0203a74] dev_queue_xmit+0xb8/0x360
[ef82b7c0] [c021e184] ip_finish_output+0xf8/0x2e0
[ef82b7e0] [c021e3f0] ip_local_out+0x34/0x48
[ef82b7f0] [c021e698] ip_push_pending_frames+0x294/0x3b8
[ef82b820] [c023ac10] udp_push_pending_frames+0x108/0x348
[ef82b850] [c023be14] udp_sendmsg+0x2dc/0x590
[ef82b8f0] [c0242bb8] inet_sendmsg+0x4c/0x78
[ef82b910] [c01f3090] sock_sendmsg+0xac/0xe4
[ef82ba00] [c01f3474] kernel_sendmsg+0x2c/0x44
[ef82ba20] [c02581a0] xs_send_kvec+0x74/0xa8
[ef82ba60] [c0258250] xs_sendpages+0x7c/0x250
[ef82ba90] [c0259ec0] xs_udp_send_request+0x44/0x158
[ef82bab0] [c0256ba0] xprt_transmit+0x64/0x21c
[ef82bae0] [c0253a6c] call_transmit+0x1e4/0x284
[ef82bb00] [c025b62c] __rpc_execute+0xa8/0x2ac
[ef82bb30] [c025431c] rpc_run_task+0x44/0x90
[ef82bb40] [c012080c] nfs_read_rpcsetup+0x16c/0x1d4
[ef82bba0] [c011e070] nfs_pageio_doio+0x70/0xa0
[ef82bbb0] [c011fcdc] nfs_readpages+0xd4/0x17c
[ef82bc10] [c008f4cc] __do_page_cache_readahead+0x14c/0x22c
[ef82bc60] [c00889b8] generic_file_aio_read+0x474/0x594
[ef82bce0] [c0116ff8] nfs_file_read+0xf8/0x13c
[ef82bd10] [c00b15a8] do_sync_read+0xc4/0x138
[ef82bdd0] [c00b1f80] vfs_read+0xb4/0x16c
[ef82bdf0] [c00b751c] kernel_read+0x38/0x50
[ef82be20] [c00b7c28] do_execve+0x12c/0x1c8
[ef82be50] [c0006054] sys_execve+0x50/0x7c
[ef82be70] [c000e04c] ret_from_syscall+0x0/0x3c
[ef82bf30] [00000000] 0x0
[ef82bf40] [c0001418] init_post+0xb0/0xf0
[ef82bf50] [c02ff320] kernel_init+0x218/0x27c
[ef82bff0] [c000ddcc] kernel_thread+0x44/0x60
Instruction dump:
80010014 83e1000c 7c0803a6 38210010 4e800020 4bfde661 4bffffdc 3d20c036
39299bc0 80090154 7c000034 5400d97e <0f000000> 2f800000 419eff94
38000001
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
modprobe: FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No
such filey
modprobe: FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No
such filey
INIT: version 2.86 booting
Welcome to DENX Embedded Linux Environment
Press 'I' to enter interactive startup.
modprobe: FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No
such filey
modprobe: FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No
such filey
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access
method.
Setting clock : Thu Jan 1 01:00:04 CET 1970 [ OK ]
Building the cache [ OK ]
Setting hostname canyonlands: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No such file or
directy
Bringing up loopback interface: [ OK ]
FATAL: Could not load /lib/modules/2.6.26.2/modules.dep: No such file or
directy
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting rpcbind: [ OK ]
Mounting NFS filesystems: [ OK ]
Mounting other filesystems: [ OK ]
Starting powerpmac: ubus: module license 'PRIVATE' taints kernel.
ubus started
[ OK ]
Starting xinetd: [ OK ]
DENX ELDK version 4.2 build 2008-04-01
Linux 2.6.26.2 on a ppc
canyonlands login:
next reply other threads:[~2008-09-09 23:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-09 23:40 Henry Bausley [this message]
2008-09-10 8:47 ` [Xenomai-help] AMCC PowerPC 460EX - error Philippe Gerum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1221003645.5414.26.camel@domain.hid \
--to=hbausley@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.