From: Jan Kara <jack@suse.cz>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH] quota: Keep which entries were set by SETQUOTA quotactl
Date: Mon, 20 Oct 2008 19:23:47 +0200 [thread overview]
Message-ID: <12245234423033-git-send-email-jack@suse.cz> (raw)
In-Reply-To: y
Quota in a clustered environment needs to synchronize quota information
among cluster nodes. This means we have to occasionally update some
information in dquot from disk / network. On the other hand we have to
be careful not to overwrite changes administrator did via SETQUOTA.
So indicate in dquot->dq_flags which entries have been set by SETQUOTA
and quota format can clear these flags when it properly propagated
the changes.
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/dquot.c | 12 ++++++++++--
include/linux/quota.h | 26 ++++++++++++++++++++------
2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/fs/dquot.c b/fs/dquot.c
index f4258fe..3fde18b 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -2008,25 +2008,33 @@ static int do_set_dqblk(struct dquot *dquot, struct if_dqblk *di)
if (di->dqb_valid & QIF_SPACE) {
dm->dqb_curspace = di->dqb_curspace;
check_blim = 1;
+ __set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BLIMITS) {
dm->dqb_bsoftlimit = qbtos(di->dqb_bsoftlimit);
dm->dqb_bhardlimit = qbtos(di->dqb_bhardlimit);
check_blim = 1;
+ __set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_INODES) {
dm->dqb_curinodes = di->dqb_curinodes;
check_ilim = 1;
+ __set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ILIMITS) {
dm->dqb_isoftlimit = di->dqb_isoftlimit;
dm->dqb_ihardlimit = di->dqb_ihardlimit;
check_ilim = 1;
+ __set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
- if (di->dqb_valid & QIF_BTIME)
+ if (di->dqb_valid & QIF_BTIME) {
dm->dqb_btime = di->dqb_btime;
- if (di->dqb_valid & QIF_ITIME)
+ __set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
+ }
+ if (di->dqb_valid & QIF_ITIME) {
dm->dqb_itime = di->dqb_itime;
+ __set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
+ }
if (check_blim) {
if (!dm->dqb_bsoftlimit || dm->dqb_curspace < dm->dqb_bsoftlimit) {
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 597e8e9..3681747 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -82,12 +82,21 @@
* Quota structure used for communication with userspace via quotactl
* Following flags are used to specify which fields are valid
*/
-#define QIF_BLIMITS 1
-#define QIF_SPACE 2
-#define QIF_ILIMITS 4
-#define QIF_INODES 8
-#define QIF_BTIME 16
-#define QIF_ITIME 32
+enum {
+ QIF_BLIMITS_B = 0,
+ QIF_SPACE_B,
+ QIF_ILIMITS_B,
+ QIF_INODES_B,
+ QIF_BTIME_B,
+ QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS (1 << QIF_BLIMITS_B)
+#define QIF_SPACE (1 << QIF_SPACE_B)
+#define QIF_ILIMITS (1 << QIF_ILIMITS_B)
+#define QIF_INODES (1 << QIF_INODES_B)
+#define QIF_BTIME (1 << QIF_BTIME_B)
+#define QIF_ITIME (1 << QIF_ITIME_B)
#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS)
#define QIF_USAGE (QIF_SPACE | QIF_INODES)
#define QIF_TIMES (QIF_BTIME | QIF_ITIME)
@@ -247,6 +256,11 @@ extern struct dqstats dqstats;
#define DQ_FAKE_B 3 /* no limits only usage */
#define DQ_READ_B 4 /* dquot was read into memory */
#define DQ_ACTIVE_B 5 /* dquot is active (dquot_release not called) */
+#define DQ_LASTSET_B 6 /* Following 6 bits (see QIF_) are reserved\
+ * for the mask of entries set via SETQUOTA\
+ * quotactl. They are set under dq_data_lock\
+ * and the quota format handling dquot can\
+ * clear them when it sees fit. */
struct dquot {
struct hlist_node dq_hash; /* Hash list in memory */
--
1.5.2.4
reply other threads:[~2008-10-20 17:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12245234423033-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.