From: Guillaume Bedot <littletux@zarb.org>
To: BlueZ development <linux-bluetooth@vger.kernel.org>
Subject: Re: [PATCH] Allow SCO with Asus WL-BTD202 dongle in btusb
Date: Tue, 28 Oct 2008 05:20:17 +0100 [thread overview]
Message-ID: <1225167617.7998.10.camel@localhost> (raw)
In-Reply-To: <1225159804.7157.41.camel@californication>
[-- Attachment #1: Type: text/plain, Size: 737 bytes --]
Le mardi 28 octobre 2008 à 03:10 +0100, Marcel Holtmann a écrit :
> Hi Guillaume,
>
> > This an other patch that allows my dongle to be configured correctly for
> > the voice/sco profile.
> >
> > I already sent one for hci_usb some time ago, so it may sound familiar,
> > but it probably didn't have correct style...
>
> you have to prove this one. Boot a kernel without the patch and call
> hciconfig hci0 up and then show me the output of hciconfig -a.
The file "hciconfig-...-before" was the output without the patch.
The file "hciconfig-...-after" is the output with the patch.
The last file contains some info from "/proc/bus/usb/devices".
Is it just proof that my dongle's firmware is out-of-date ?
Regards,
Guillaume B.
[-- Attachment #2: hciconfig-wl-btd202.before.txt --]
[-- Type: text/plain, Size: 574 bytes --]
hci0: Type: USB
BD Address: 00:0B:0D:4C:22:92 ACL MTU: 1017:8 SCO MTU: 64:0
UP RUNNING
RX bytes:619 acl:0 sco:0 events:13 errors:0
TX bytes:44 acl:0 sco:0 commands:13 errors:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'localhost-0'
Class: 0x4a0104
Service Classes: Networking, Capturing, Telephony
Device Class: Computer, Desktop workstation
HCI Ver: 2.0 (0x3) HCI Rev: 0x40eb LMP Ver: 2.0 (0x3) LMP Subver: 0x430e
Manufacturer: Broadcom Corporation (15)
[-- Attachment #3: hciconfig-wl-btd202.after.txt --]
[-- Type: text/plain, Size: 630 bytes --]
hci0: Type: USB
BD Address: 00:0B:0D:4C:22:92 ACL MTU: 1017:8 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:4055672 acl:48817 sco:72479 events:22711 errors:0
TX bytes:79729659 acl:89869 sco:0 commands:107 errors:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'localhost-0'
Class: 0x4a0104
Service Classes: Networking, Capturing, Telephony
Device Class: Computer, Desktop workstation
HCI Ver: 2.0 (0x3) HCI Rev: 0x40eb LMP Ver: 2.0 (0x3) LMP Subver: 0x430e
Manufacturer: Broadcom Corporation (15)
[-- Attachment #4: wl-btd202.txt --]
[-- Type: text/plain, Size: 1619 bytes --]
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=1715 Rev= 1.00
S: Manufacturer=Broadcom Corp
S: Product=WL-BTD202
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
next prev parent reply other threads:[~2008-10-28 4:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-28 0:00 [PATCH] Allow SCO with Asus WL-BTD202 dongle in btusb Guillaume Bedot
2008-10-28 2:10 ` Marcel Holtmann
2008-10-28 4:20 ` Guillaume Bedot [this message]
2008-11-30 10:46 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225167617.7998.10.camel@localhost \
--to=littletux@zarb.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.