From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 36/49] Staging: at76_usb: fix up all remaining checkpatch.pl warnings
Date: Wed, 29 Oct 2008 15:40:03 -0700 [thread overview]
Message-ID: <1225320016-21803-36-git-send-email-greg@kroah.com> (raw)
In-Reply-To: <20081029223832.GC21657@kroah.com>
From: Greg Kroah-Hartman <gregkh@suse.de>
It's now a "clean" driver.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/staging/at76_usb/at76_usb.c | 176 +++++++++++++++++++----------------
1 files changed, 94 insertions(+), 82 deletions(-)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index b8a056d..5591b17 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -91,18 +91,18 @@
/* Use our own dbg macro */
#define at76_dbg(bits, format, arg...) \
- do { \
- if (at76_debug & (bits)) \
+do { \
+ if (at76_debug & (bits)) \
printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
- } while (0)
+} while (0)
#define at76_dbg_dump(bits, buf, len, format, arg...) \
- do { \
- if (at76_debug & (bits)) { \
+do { \
+ if (at76_debug & (bits)) { \
printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
} \
- } while (0)
+} while (0)
static int at76_debug = DBG_DEFAULTS;
@@ -300,22 +300,30 @@ struct dfu_status {
static inline int at76_is_intersil(enum board_type board)
{
- return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
+ if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863)
+ return 1;
+ return 0;
}
static inline int at76_is_503rfmd(enum board_type board)
{
- return (board == BOARD_503 || board == BOARD_503_ACC);
+ if (board == BOARD_503 || board == BOARD_503_ACC)
+ return 1;
+ return 0;
}
static inline int at76_is_505(enum board_type board)
{
- return (board == BOARD_505 || BOARD_505_2958);
+ if (board == BOARD_505 || board == BOARD_505_2958)
+ return 1;
+ return 0;
}
static inline int at76_is_505a(enum board_type board)
{
- return (board == BOARD_505A || board == BOARD_505AMX);
+ if (board == BOARD_505A || board == BOARD_505AMX)
+ return 1;
+ return 0;
}
/* Load a block of the first (internal) part of the firmware */
@@ -1054,20 +1062,23 @@ static void at76_dump_mib_mac_encryption(struct at76_priv *priv)
int i;
int ret;
/*int key_len;*/
- struct mib_mac_encryption *m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL);
+ struct mib_mac_encryption *m;
+ m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL);
if (!m)
return;
ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m,
sizeof(struct mib_mac_encryption));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ dev_err(&priv->udev->dev,
+ "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n",
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
- at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u "
+ at76_dbg(DBG_MIB,
+ "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u "
"ciph_key_id %u grp_key_id %u excl_unencr %u "
"ckip_key_perm %u wep_icv_err %u wep_excluded %u",
wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid),
@@ -1083,7 +1094,8 @@ static void at76_dump_mib_mac_encryption(struct at76_priv *priv)
for (i = 0; i < CIPHER_KEYS; i++)
at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s",
wiphy_name(priv->hw->wiphy), i,
- hex2str(m->cipher_default_keyvalue[i], CIPHER_KEY_LEN));
+ hex2str(m->cipher_default_keyvalue[i],
+ CIPHER_KEY_LEN));
exit:
kfree(m);
}
@@ -1622,10 +1634,12 @@ static void at76_rx_tasklet(unsigned long param)
skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN);
at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN],
- priv->rx_skb->len, "RX: len=%d", (int)(priv->rx_skb->len - AT76_RX_HDRLEN));
+ priv->rx_skb->len, "RX: len=%d",
+ (int)(priv->rx_skb->len - AT76_RX_HDRLEN));
rx_status.signal = buf->rssi;
- rx_status.rate_idx = buf->rx_rate; /* FIXME: is rate_idx still present in structure? */
+ /* FIXME: is rate_idx still present in structure? */
+ rx_status.rate_idx = buf->rx_rate;
rx_status.flag |= RX_FLAG_DECRYPTED;
rx_status.flag |= RX_FLAG_IV_STRIPPED;
@@ -1726,7 +1740,9 @@ static void at76_mac80211_tx_callback(struct urb *urb)
switch (urb->status) {
case 0:
/* success */
- info->flags |= IEEE80211_TX_STAT_ACK; /* FIXME: is the frame really ACKed when tx_callback is called ? */
+ /* FIXME:
+ * is the frame really ACKed when tx_callback is called ? */
+ info->flags |= IEEE80211_TX_STAT_ACK;
break;
case -ENOENT:
case -ECONNRESET:
@@ -1780,8 +1796,10 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) {
tx_buffer->key_id = (info->control.hw_key->keyidx);
- tx_buffer->cipher_type = priv->keys[info->control.hw_key->keyidx].cipher;
- tx_buffer->cipher_length = priv->keys[info->control.hw_key->keyidx].keylen;
+ tx_buffer->cipher_type =
+ priv->keys[info->control.hw_key->keyidx].cipher;
+ tx_buffer->cipher_length =
+ priv->keys[info->control.hw_key->keyidx].keylen;
tx_buffer->reserved = 0;
} else {
tx_buffer->key_id = 0;
@@ -2184,41 +2202,40 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
memcpy(priv->mib_buf.data.data, key->key, key->keylen);
switch (key->alg) {
- case ALG_WEP:
- if (key->keylen == 5) {
- priv->keys[key->keyidx].cipher =
- CIPHER_WEP64;
- priv->keys[key->keyidx].keylen = 8;
- } else if (key->keylen == 13) {
- priv->keys[key->keyidx].cipher =
- CIPHER_WEP128;
- /* Firmware needs this */
- priv->keys[key->keyidx].keylen = 8;
- } else {
- ret = -EOPNOTSUPP;
- goto exit;
- };
- break;
- case ALG_TKIP:
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- priv->keys[key->keyidx].cipher = CIPHER_TKIP;
- priv->keys[key->keyidx].keylen = 12;
- break;
-
- case ALG_CCMP:
- if (!at76_is_505a(priv->board_type)) {
- ret = -EOPNOTSUPP;
- goto exit;
- };
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- priv->keys[key->keyidx].cipher = CIPHER_CCMP;
- priv->keys[key->keyidx].keylen = 16;
- break;
+ case ALG_WEP:
+ if (key->keylen == 5) {
+ priv->keys[key->keyidx].cipher =
+ CIPHER_WEP64;
+ priv->keys[key->keyidx].keylen = 8;
+ } else if (key->keylen == 13) {
+ priv->keys[key->keyidx].cipher =
+ CIPHER_WEP128;
+ /* Firmware needs this */
+ priv->keys[key->keyidx].keylen = 8;
+ } else {
+ ret = -EOPNOTSUPP;
+ goto exit;
+ };
+ break;
+ case ALG_TKIP:
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ priv->keys[key->keyidx].cipher = CIPHER_TKIP;
+ priv->keys[key->keyidx].keylen = 12;
+ break;
- default:
+ case ALG_CCMP:
+ if (!at76_is_505a(priv->board_type)) {
ret = -EOPNOTSUPP;
goto exit;
+ };
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ priv->keys[key->keyidx].cipher = CIPHER_CCMP;
+ priv->keys[key->keyidx].keylen = 16;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto exit;
};
priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher;
@@ -2261,8 +2278,8 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
priv->mib_buf.data.data[1] = priv->default_pairwise_key;
priv->mib_buf.data.data[2] = priv->default_group_key;
- if ((ret = at76_set_mib(priv, &priv->mib_buf)) !=
- CMD_STATUS_COMPLETE)
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret != CMD_STATUS_COMPLETE)
goto exit;
/* second block of settings */
@@ -2273,8 +2290,8 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */
priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */
- if ((ret = at76_set_mib(priv, &priv->mib_buf)) !=
- CMD_STATUS_COMPLETE)
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret != CMD_STATUS_COMPLETE)
goto exit;
ret = 0;
};
@@ -2290,8 +2307,6 @@ static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
{
struct at76_priv *priv = hw->priv;
- // int i;
-
at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
"key->keylen %d",
__func__, cmd, key->alg, key->keyidx, key->keylen);
@@ -2445,6 +2460,7 @@ static struct ieee80211_supported_band at76_supported_band = {
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
{
+ struct device *dev = &interface->dev;
int ret;
/* set up the endpoint information */
@@ -2460,8 +2476,7 @@ static int at76_init_new_device(struct at76_priv *priv,
/* MAC address */
ret = at76_get_hw_config(priv);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot get MAC address\n");
+ dev_err(dev, "cannot get MAC address\n");
goto exit;
}
@@ -2500,22 +2515,21 @@ static int at76_init_new_device(struct at76_priv *priv,
ret = ieee80211_register_hw(priv->hw);
if (ret) {
- printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
- ret);
+ dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret);
goto exit;
}
priv->mac80211_registered = 1;
- printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
- wiphy_name(priv->hw->wiphy),
- interface->dev.bus_id, mac2str(priv->mac_addr),
- priv->fw_version.major, priv->fw_version.minor,
- priv->fw_version.patch, priv->fw_version.build);
- printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
- wiphy_name(priv->hw->wiphy),
- priv->regulatory_domain, priv->domain->name);
- printk(KERN_INFO "%s: WPA support: ", wiphy_name(priv->hw->wiphy));
+ dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
+ wiphy_name(priv->hw->wiphy),
+ interface->dev.bus_id, mac2str(priv->mac_addr),
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+ dev_info(dev, "%s: regulatory domain 0x%02x: %s\n",
+ wiphy_name(priv->hw->wiphy),
+ priv->regulatory_domain, priv->domain->name);
+ dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy));
if (!FIRMWARE_IS_WPA(priv->fw_version))
printk("none\n");
else {
@@ -2596,8 +2610,8 @@ static int at76_probe(struct usb_interface *interface,
we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
if (op_mode == OPMODE_HW_CONFIG_MODE) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot handle a device in HW_CONFIG_MODE\n");
+ dev_err(&interface->dev,
+ "cannot handle a device in HW_CONFIG_MODE\n");
ret = -EBUSY;
goto error;
}
@@ -2605,13 +2619,12 @@ static int at76_probe(struct usb_interface *interface,
if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
&& op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
/* download internal firmware part */
- dev_printk(KERN_DEBUG, &interface->dev,
- "downloading internal firmware\n");
+ dev_dbg(&interface->dev, "downloading internal firmware\n");
ret = at76_load_internal_fw(udev, fwe);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d downloading internal firmware\n",
- ret);
+ dev_err(&interface->dev,
+ "error %d downloading internal firmware\n",
+ ret);
goto error;
}
usb_put_dev(udev);
@@ -2636,8 +2649,7 @@ static int at76_probe(struct usb_interface *interface,
need_ext_fw = 1;
if (need_ext_fw) {
- dev_printk(KERN_DEBUG, &interface->dev,
- "downloading external firmware\n");
+ dev_dbg(&interface->dev, "downloading external firmware\n");
ret = at76_load_external_fw(udev, fwe);
if (ret)
@@ -2646,8 +2658,8 @@ static int at76_probe(struct usb_interface *interface,
/* Re-check firmware version */
ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d getting firmware version\n", ret);
+ dev_err(&interface->dev,
+ "error %d getting firmware version\n", ret);
goto error;
}
}
--
1.6.0.2
next prev parent reply other threads:[~2008-10-29 22:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-29 22:38 [GIT PATCH] STAGING patches for 2.6-git Greg KH
2008-10-29 22:39 ` [PATCH 01/49] staging: correct dubious use of !x & y Greg KH
2008-10-29 22:39 ` [PATCH 02/49] Staging: make usbip depend on CONFIG_NET Greg KH
2008-10-29 22:39 ` [PATCH 03/49] Staging: w35und: make wb35_probe() and wb35_disconnect() funtions static Greg KH
2008-10-29 22:39 ` [PATCH 04/49] Staging: w35und: remove unused wb35_open() and wb35_close() functions Greg KH
2008-10-29 22:39 ` [PATCH 05/49] Staging: w35und: use msleep() and udelay() Greg KH
2008-10-29 22:39 ` [PATCH 06/49] Staging: w35und: remove the no-op pa_stall_execution macro Greg KH
2008-10-29 22:39 ` [PATCH 07/49] Staging: w35und: purb typedef removal Greg KH
2008-10-29 22:39 ` [PATCH 08/49] Staging: w35und: reg queue struct " Greg KH
2008-10-29 22:39 ` [PATCH 09/49] Staging: w35und: wb35reg " Greg KH
2008-10-29 22:39 ` [PATCH 10/49] Staging: w35und: padapter " Greg KH
2008-10-29 22:39 ` [PATCH 11/49] Staging: w35und: merge wblinux struct to adapter Greg KH
2008-10-29 22:39 ` [PATCH 12/49] Staging: w35und: wb35_probe() cleanup Greg KH
2008-10-29 22:39 ` [PATCH 13/49] Staging: w35und: remove usb_submit_urb wrapper function Greg KH
2008-10-29 23:09 ` Pavel Machek
2008-10-29 22:39 ` [PATCH 14/49] Staging: w35und: remove usb_alloc_urb " Greg KH
2008-10-29 23:10 ` Pavel Machek
2008-10-29 22:39 ` [PATCH 15/49] w35und: remove dead code from wbusb_f.h Greg KH
2008-10-29 22:39 ` [PATCH 16/49] Staging: w35und: remove true/false boolean macros Greg KH
2008-10-29 22:39 ` [PATCH 17/49] Staging: w35und: OS_MEMORY_ALLOC wrapper removal Greg KH
2008-10-29 22:39 ` [PATCH 18/49] Staging: w35und: usb_put_dev() is missing from wb35_disconnect() Greg KH
2008-10-29 22:39 ` [PATCH 19/49] Staging: w35und: remove macro magic from MLME_GetNextPacket() Greg KH
2008-10-29 22:39 ` [PATCH 20/49] Staging: w35und: plug memory leak in wbsoft_tx() Greg KH
2008-10-29 22:39 ` [PATCH 21/49] Staging: w35und: move supported band initialization out of wb35_probe() Greg KH
2008-10-29 22:39 ` [PATCH 22/49] Staging: wlan-ng: Remove PCI/PLX/PCMCIA files Greg KH
2008-10-29 22:39 ` [PATCH 23/49] Staging: wlan-ng: Update Help text to mention prism3 devices Greg KH
2008-10-29 22:39 ` [PATCH 24/49] Staging: wlan-ng: Delete PCI/PLX/PCMCIA-specific code Greg KH
2008-10-29 22:39 ` [PATCH 25/49] Staging: wlan-ng: Make wlan-ng use WEXT mode by default Greg KH
2008-10-29 22:39 ` [PATCH 26/49] Staging: wlan-ng: Eliminate more <2.6 kernel support Greg KH
2008-10-29 22:39 ` [PATCH 27/49] Staging: wlan-ng: Eliminate all backwards-compatibility for <2.6.13 kernels Greg KH
2008-10-29 22:39 ` [PATCH 28/49] Staging: wlan-ng: Eliminate a boatload of tertiaryAP-only code Greg KH
2008-10-29 22:39 ` [PATCH 29/49] Staging: wlan-ng: Remove AP-only code from MLME functions Greg KH
2008-10-29 22:39 ` [PATCH 30/49] Staging: wlan-ng: Get rid of the MTU tests in the rx conversion path Greg KH
2008-10-29 22:39 ` [PATCH 31/49] Staging: wlan-ng: Eliminate one more rx mtu test Greg KH
2008-10-29 22:39 ` [PATCH 32/49] Staging: wlan-ng: Eliminate local 'version.h' Greg KH
2008-10-29 22:40 ` [PATCH 33/49] Staging: wlan-ng: Eliminate usage of procfs Greg KH
2008-10-29 22:40 ` [PATCH 34/49] Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port Greg KH
2008-10-29 22:40 ` [PATCH 35/49] Staging: at76_usb: remove compiler warnings Greg KH
2008-10-29 22:40 ` Greg KH [this message]
2008-10-29 22:40 ` [PATCH 37/49] Staging: poch: Block size bug fix Greg KH
2008-10-29 22:40 ` [PATCH 38/49] Staging: poch: Update TODO list Greg KH
2008-10-29 22:40 ` [PATCH 39/49] Staging: poch: Correct pages from bytes Greg KH
2008-10-29 22:40 ` [PATCH 40/49] Staging: poch: minor fixes Greg KH
2008-10-29 22:40 ` [PATCH 41/49] Staging: poch: Fix build warnings Greg KH
2008-10-29 22:40 ` [PATCH 42/49] Staging: poch: Rx control register init Greg KH
2008-10-29 22:40 ` [PATCH 43/49] Staging: poch: Fix user space protocol syncing Greg KH
2008-10-29 22:40 ` [PATCH 44/49] Staging: poch: Fine grained locking Greg KH
2008-10-29 22:40 ` [PATCH 45/49] Staging: sxg: remove typedefs Greg KH
2008-10-29 22:40 ` [PATCH 46/49] Staging: sxg: break the build in a cleaner way when !x86 Greg KH
2008-10-29 22:40 ` [PATCH 47/49] Staging: add agnx wireless driver Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225320016-21803-36-git-send-email-greg@kroah.com \
--to=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.