From: Tejun Heo <tj@kernel.org>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, Tejun Heo <tj@kernel.org>
Subject: [PATCH 6/8] SATA PIIX: Blacklist system that spins off disks during ACPI power off
Date: Mon, 3 Nov 2008 19:01:07 +0900 [thread overview]
Message-ID: <1225706469-27870-7-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1225706469-27870-1-git-send-email-tj@kernel.org>
From: Rafael J. Wysocki <rjw@sisk.pl>
Some notebooks from HP have the problem that their BIOSes attempt to
spin down hard drives before entering ACPI system states S4 and S5.
This leads to a yo-yo effect during system power-off shutdown and the
last phase of hibernation when the disk is first spun down by the
kernel and then almost immediately turned on and off by the BIOS.
This, in turn, may result in shortening the disk's life times.
To prevent this from happening we can blacklist the affected systems
using DMI information.
Blacklist HP 2510p that uses the ata_piix driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/ata_piix.c | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 8e37be1..f5fff92 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1370,6 +1370,32 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
}
}
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq 2510p",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
/**
* piix_init_one - Register PIIX ATA PCI device with kernel services
* @pdev: PCI device to register
@@ -1405,6 +1431,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
if (!in_module_init)
return -ENODEV;
+ if (piix_broken_system_poweroff(pdev)) {
+ piix_port_info[ent->driver_data].flags |=
+ ATA_FLAG_NO_POWEROFF_SPINDOWN |
+ ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+ dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+ "on poweroff and hibernation\n");
+ }
+
port_info[0] = piix_port_info[ent->driver_data];
port_info[1] = piix_port_info[ent->driver_data];
--
1.5.4.5
next prev parent reply other threads:[~2008-11-03 10:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-03 10:01 [PATCHSET #upstream-fixes] patches which fell off the crack during maintainership handover Tejun Heo
2008-11-03 10:01 ` [PATCH 1/8] Hibernation: Introduce system_entering_hibernation Tejun Heo
2008-11-04 6:14 ` Jeff Garzik
2008-11-03 10:01 ` [PATCH 2/8] DMI: Introduce dmi_first_match to make the interface more flexible Tejun Heo
2008-11-03 10:01 ` [PATCH 3/8] SATA: Blacklisting of systems that spin off disks during ACPI power off (rev. 2) Tejun Heo
2008-11-03 10:01 ` [PATCH 4/8] SATA AHCI: Blacklist system that spins off disks during ACPI power off Tejun Heo
2008-11-03 10:01 ` [PATCH 5/8] SATA Sil: " Tejun Heo
2008-11-03 10:01 ` Tejun Heo [this message]
2008-11-03 10:01 ` [PATCH 7/8] libata: Fix a potential race condition in ata_scsi_park_show() Tejun Heo
2008-11-04 6:10 ` Jeff Garzik
2008-11-03 10:01 ` [PATCH 8/8] libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it Tejun Heo
2008-11-04 6:11 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225706469-27870-7-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.