From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, "Michael Chan" <mchan@broadcom.com>,
andy@greyhouse.net
Subject: [PATCH 04/15] tg3: Preserve LAA when device control is released
Date: Mon, 3 Nov 2008 02:11:19 -0800 [thread overview]
Message-ID: <1225751620.6175@xw6200> (raw)
This patch moves the __tg3_set_mac_addr() function earlier in the file
listing, to avoid a function prototype, and calls the function to
restore the LAA after a driver unload chip reset. With this code in
place, the administrator can wake the machine using the LAA.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 76 +++++++++++++++++++++++++++-------------------------
1 files changed, 39 insertions(+), 37 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e04cd98..9bd1be4 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2014,6 +2014,43 @@ static void tg3_power_down_phy(struct tg3 *tp)
tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
}
+/* tp->lock is held. */
+static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
+{
+ u32 addr_high, addr_low;
+ int i;
+
+ addr_high = ((tp->dev->dev_addr[0] << 8) |
+ tp->dev->dev_addr[1]);
+ addr_low = ((tp->dev->dev_addr[2] << 24) |
+ (tp->dev->dev_addr[3] << 16) |
+ (tp->dev->dev_addr[4] << 8) |
+ (tp->dev->dev_addr[5] << 0));
+ for (i = 0; i < 4; i++) {
+ if (i == 1 && skip_mac_1)
+ continue;
+ tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
+ tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
+ }
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
+ for (i = 0; i < 12; i++) {
+ tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
+ tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
+ }
+ }
+
+ addr_high = (tp->dev->dev_addr[0] +
+ tp->dev->dev_addr[1] +
+ tp->dev->dev_addr[2] +
+ tp->dev->dev_addr[3] +
+ tp->dev->dev_addr[4] +
+ tp->dev->dev_addr[5]) &
+ TX_BACKOFF_SEED_MASK;
+ tw32(MAC_TX_BACKOFF_SEED, addr_high);
+}
+
static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
{
u32 misc_host_ctrl;
@@ -2101,6 +2138,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
}
}
+ __tg3_set_mac_addr(tp, 0);
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
u32 val;
@@ -6901,43 +6940,6 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
}
-/* tp->lock is held. */
-static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
-{
- u32 addr_high, addr_low;
- int i;
-
- addr_high = ((tp->dev->dev_addr[0] << 8) |
- tp->dev->dev_addr[1]);
- addr_low = ((tp->dev->dev_addr[2] << 24) |
- (tp->dev->dev_addr[3] << 16) |
- (tp->dev->dev_addr[4] << 8) |
- (tp->dev->dev_addr[5] << 0));
- for (i = 0; i < 4; i++) {
- if (i == 1 && skip_mac_1)
- continue;
- tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
- tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
- }
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
- for (i = 0; i < 12; i++) {
- tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
- tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
- }
- }
-
- addr_high = (tp->dev->dev_addr[0] +
- tp->dev->dev_addr[1] +
- tp->dev->dev_addr[2] +
- tp->dev->dev_addr[3] +
- tp->dev->dev_addr[4] +
- tp->dev->dev_addr[5]) &
- TX_BACKOFF_SEED_MASK;
- tw32(MAC_TX_BACKOFF_SEED, addr_high);
-}
-
static int tg3_set_mac_addr(struct net_device *dev, void *p)
{
struct tg3 *tp = netdev_priv(dev);
--
1.5.6.4
next reply other threads:[~2008-11-03 22:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-03 10:11 Matt Carlson [this message]
2008-11-04 0:51 ` [PATCH 04/15] tg3: Preserve LAA when device control is released David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225751620.6175@xw6200 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.