From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@openedhand.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: Switch WM8350 revision detection to a feature based model
Date: Tue, 18 Nov 2008 15:22:17 +0000 [thread overview]
Message-ID: <1227021737-19913-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Rather than check for chip revisions in the WM8350 drivers have the core
code set flags for relevant differences.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8350-core.c | 6 ++----
drivers/power/wm8350_power.c | 2 +-
include/linux/mfd/wm8350/core.h | 8 --------
include/linux/mfd/wm8350/supply.h | 2 ++
4 files changed, 5 insertions(+), 13 deletions(-)
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 3734f20..7dece8e 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1225,19 +1225,17 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) {
case WM8350_REV_E:
dev_info(wm8350->dev, "Found Rev E device\n");
- wm8350->rev = WM8350_REV_E;
break;
case WM8350_REV_F:
dev_info(wm8350->dev, "Found Rev F device\n");
- wm8350->rev = WM8350_REV_F;
break;
case WM8350_REV_G:
dev_info(wm8350->dev, "Found Rev G device\n");
- wm8350->rev = WM8350_REV_G;
+ wm8350->power.rev_g_coeff = 1;
break;
case WM8350_REV_H:
dev_info(wm8350->dev, "Found Rev H device\n");
- wm8350->rev = WM8350_REV_H;
+ wm8350->power.rev_g_coeff = 1;
break;
default:
/* For safety we refuse to run on unknown hardware */
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c
index 9c0a847..74e7593 100644
--- a/drivers/power/wm8350_power.c
+++ b/drivers/power/wm8350_power.c
@@ -44,7 +44,7 @@ static int wm8350_read_usb_uvolts(struct wm8350 *wm8350)
static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min)
{
- if (wm8350->rev < WM8350_REV_G)
+ if (!wm8350->power.rev_g_coeff)
return (((min - 30) / 15) & 0xf) << 8;
else
return (((min - 30) / 30) & 0xf) << 8;
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 8e11539..349d439 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -558,12 +558,6 @@
#define WM8350_IRQ_WKUP_ONKEY 48
#define WM8350_IRQ_WKUP_GP_WAKEUP 49
-/* wm8350 chip revisions */
-#define WM8350_REV_E 0x4
-#define WM8350_REV_F 0x5
-#define WM8350_REV_G 0x6
-#define WM8350_REV_H 0x7
-
#define WM8350_NUM_IRQ 63
struct wm8350_reg_access {
@@ -585,8 +579,6 @@ struct wm8350_irq {
};
struct wm8350 {
- int rev; /* chip revision */
-
struct device *dev;
/* device IO */
diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h
index 293fff2..8713533 100644
--- a/include/linux/mfd/wm8350/supply.h
+++ b/include/linux/mfd/wm8350/supply.h
@@ -130,6 +130,8 @@ struct wm8350_power {
struct power_supply usb;
struct power_supply ac;
struct wm8350_charger_policy *policy;
+
+ int rev_g_coeff;
};
#endif
--
1.5.6.5
next reply other threads:[~2008-11-18 15:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-18 15:22 Mark Brown [this message]
2008-11-18 15:24 ` [PATCH] mfd: Switch WM8350 revision detection to a feature based model Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1227021737-19913-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@openedhand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.