Re: flash_eraseall reports incorrect percentage

[Artem Bityutskiy <dedekind@infradead.org>]

On Tue, 2008-11-18 at 19:56 +0100, Ladislav Michl wrote:
> On Wed, Jan 30, 2008 at 02:03:13PM +0100, Stefan Roese wrote:
> > It seems that the flash_eraseall utility doesn't report the correct percentage 
> > upon completion. After erasing the last sector, the output seems not to get 
> > updated anymore. This leads to something like this on a partition with only 2 
> > sectors:
> > 
> > flash_eraseall /dev/mtd6
> > Erasing 256 Kibyte @ 40000 -- 50 % complete.
> > 
> > I'm just posting this report as a reference. Perhaps somebody has a little 
> > time to fix it.
> 
> Well, I sacrificed a little time otherwise used to prepare supper, but
> fridge is emty...
> 
> # flash_eraseall /dev/mtd4
> Erasing 128 Kibyte @ 2800000 -- 100 % complete.
> 
> flash_eraseall
>  * fix percentage reporting
>  * exit()ing from main() is overkill, just return
> 
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>


It seems others are busy, so I took a look at this. I think the patch is
OK, pushed to mtd-utils.git.

Thanks.

-- 
Best regards,
Artem Bityutskiy (Битюцкий Артём)