From: Brian Rosenberger <brian@brutex.de>
To: video4linux-list@redhat.com
Subject: Pinnacle PCTV USB (DVB-T device [eb1a:2870])
Date: Fri, 05 Dec 2008 17:10:15 +0100 [thread overview]
Message-ID: <1228493415.439.8.camel@bru02> (raw)
Hi,
I am trying to get my Pinnacle PCTV USB (DVB-T device [eb1a:2870]) to
work. I fetched sources from http://linuxtv.org/hg/v4l-dvb and then did
a make, make install and make load. Everything went fine as far my
understanding is (yes with reboot in between).
Next I plugged the usb stick and checked dmesg (see below). I am a bit
stuck right now, I did try some card=xx variants, but /dev/dvb isn't
created.
What are the next steps?
Thanks
Brian
lsusb:
Bus 001 Device 009: ID eb1a:2870 eMPIA Technology, Inc.
dmesg:
[ 1056.236017] usb 1-2: new high speed USB device using ehci_hcd and
address 9
[ 1056.372377] usb 1-2: configuration #1 chosen from 1 choice
[ 1056.373501] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870,
interface 0, class 0)
[ 1056.373508] em28xx #0: Identified as Unknown EM2750/28xx video
grabber (card=1)
[ 1056.375238] em28xx #0: em28xx chip ID = 35
[ 1056.415407] compat_ioctl32: exports duplicate symbol
v4l_compat_ioctl32 (owned by v4l2_compat_ioctl32)
[ 1056.703611] Chip ID is not zero. It is not a TEA5767
[ 1056.703669] tuner' 5-0060: chip found @ 0xc0 (em28xx #0)
[ 1056.746239] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12
81 00 6a 22 00 00
[ 1056.746246] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00
00 00 00 00 00 00
[ 1056.746252] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00
00 00 5b 00 00 00
[ 1056.746256] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01
00 00 27 e6 39 4a
[ 1056.746261] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746266] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746271] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
22 03 55 00 53 00
[ 1056.746276] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00
30 00 20 00 44 00
[ 1056.746281] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00
00 00 00 00 00 00
[ 1056.746286] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746291] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746295] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746300] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746305] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746310] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746315] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 1056.746321] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash =
0x391183c3
[ 1056.746322] em28xx #0: EEPROM info:
[ 1056.746323] em28xx #0: No audio on board.
[ 1056.746324] em28xx #0: 500mA max power
[ 1056.746325] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 1056.793489] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 1056.799989] em28xx #0: found i2c device @ 0xc0 [tuner (analog)]
[ 1056.810365] em28xx #0: Your board has no unique USB ID and thus need
a hint to be detected.
[ 1056.810370] em28xx #0: You may try to use card=<n> insmod option to
workaround that.
[ 1056.810371] em28xx #0: Please send an email with this log to:
[ 1056.810372] em28xx #0: V4L Mailing List
<video4linux-list@redhat.com>
[ 1056.810373] em28xx #0: Board eeprom hash is 0x391183c3
[ 1056.810375] em28xx #0: Board i2c devicelist hash is 0x4b800080
[ 1056.810376] em28xx #0: Here is a list of valid choices for the
card=<n> insmod option:
[ 1056.810377] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 1056.810379] em28xx #0: card=1 -> Unknown EM2750/28xx video
grabber
[ 1056.810380] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 1056.810381] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 1056.810383] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 1056.810384] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 1056.810385] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 1056.810386] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 1056.810388] em28xx #0: card=8 -> Kworld USB2800
[ 1056.810389] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100
[ 1056.810390] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 1056.810392] em28xx #0: card=11 -> Terratec Hybrid XS
[ 1056.810393] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 1056.810394] em28xx #0: card=13 -> Terratec Prodigy XS
[ 1056.810395] em28xx #0: card=14 -> Pixelview Prolink PlayTV USB
2.0
[ 1056.810397] em28xx #0: card=15 -> V-Gear PocketTV
[ 1056.810398] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 1056.810399] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 1056.810401] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 1056.810402] em28xx #0: card=19 -> PointNix Intra-Oral Camera
[ 1056.810403] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 1056.810405] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX
+ Video Encoder
[ 1056.810406] em28xx #0: card=22 -> Unknown EM2750/EM2751 webcam
grabber
[ 1056.810407] em28xx #0: card=23 -> Huaqi DLCW-130
[ 1056.810409] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 1056.810410] em28xx #0: card=25 -> Gadmei UTV310
[ 1056.810411] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 1056.810412] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips
FM1216ME)
[ 1056.810414] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 1056.810415] em28xx #0: card=29 -> Pinnacle Dazzle DVC 100
[ 1056.810416] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 1056.810418] em28xx #0: card=31 -> Usbgear VD204v9
[ 1056.810419] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 1056.810420] em28xx #0: card=33 -> SIIG AVTuner-PVR/Prolink PlayTV
USB 2.0
[ 1056.810422] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 1056.810423] em28xx #0: card=35 -> Typhoon DVD Maker
[ 1056.810424] em28xx #0: card=36 -> NetGMBH Cam
[ 1056.810426] em28xx #0: card=37 -> Gadmei UTV330
[ 1056.810427] em28xx #0: card=38 -> Yakumo MovieMixer
[ 1056.810428] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 1056.810429] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 1056.810430] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 1056.810432] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 1056.810433] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 1056.810434] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 1056.810436] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 1056.810437] em28xx #0: card=46 -> Compro, VideoMate U3
[ 1056.810438] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 1056.810439] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 1056.810440] em28xx #0: card=49 -> MSI DigiVox A/D
[ 1056.810442] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 1056.810443] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 1056.810444] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 1056.810445] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 1056.810447] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 1056.810448] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 1056.810449] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 1056.810450] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 1056.810452] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 1056.810453] em28xx #0: card=59 -> Pinnacle PCTV HD Mini
[ 1056.824367] em28xx #0: Config register raw data: 0xc0
[ 1056.824368] em28xx #0: No AC97 audio processor
[ 1057.156130] em28xx #0: V4L2 device registered as /dev/video1
and /dev/vbi0
[ 1057.156136] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 1057.156137] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1057.169918] compat_ioctl32: exports duplicate symbol
v4l_compat_ioctl32 (owned by v4l2_compat_ioctl32)
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2008-12-05 16:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 16:10 Brian Rosenberger [this message]
2008-12-05 16:22 ` Pinnacle PCTV USB (DVB-T device [eb1a:2870]) Devin Heitmueller
2008-12-05 17:45 ` Brian Rosenberger
2008-12-05 17:49 ` Devin Heitmueller
2008-12-06 17:07 ` Brian Rosenberger
2008-12-09 12:36 ` Pádraig Brady
2008-12-09 14:57 ` Devin Heitmueller
2008-12-09 16:09 ` Pádraig Brady
2008-12-09 16:15 ` Devin Heitmueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1228493415.439.8.camel@bru02 \
--to=brian@brutex.de \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.