From: "stanley.miao" <stanley.miao@windriver.com>
To: alsa-devel@alsa-project.org
Cc: broonie@sirena.org.uk
Subject: Re: [PATCHv2] TWL4030: hands-free start-up sequence.
Date: Thu, 11 Dec 2008 23:32:48 +0800 [thread overview]
Message-ID: <1229009568.7494.18.camel@localhost> (raw)
In-Reply-To: <1229009290-8767-1-git-send-email-stanley.miao@windriver.com>
Changes from last version:
1, clear the bits explicitly.
Stanley.
On Thu, 2008-12-11 at 23:28 +0800, Stanley.Miao wrote:
> A special start-up sequence is required to reduce the pop-noise of Class D
> amplifier when enable hands-free on TWL4030.
>
> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
> ---
> sound/soc/codecs/twl4030.c | 34 ++++++++++++++++++++++++++++++----
> sound/soc/codecs/twl4030.h | 6 ++++++
> 2 files changed, 36 insertions(+), 4 deletions(-)
>
> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
> index 1377302..5184888 100644
> --- a/sound/soc/codecs/twl4030.c
> +++ b/sound/soc/codecs/twl4030.c
> @@ -322,6 +322,30 @@ static int outmixer_event(struct snd_soc_dapm_widget *w,
> return ret;
> }
>
> +static int handsfree_event(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
> + unsigned char hs_ctl;
> +
> + hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
> +
> + if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
> + hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
> + twl4030_write(w->codec, e->reg, hs_ctl);
> + hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
> + twl4030_write(w->codec, e->reg, hs_ctl);
> + hs_ctl |= TWL4030_HF_CTL_HB_EN;
> + twl4030_write(w->codec, e->reg, hs_ctl);
> + } else {
> + hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
> + | TWL4030_HF_CTL_HB_EN);
> + twl4030_write(w->codec, e->reg, hs_ctl);
> + }
> +
> + return 0;
> +}
> +
> /*
> * Some of the gain controls in TWL (mostly those which are associated with
> * the outputs) are implemented in an interesting way:
> @@ -806,10 +830,12 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
> SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
> &twl4030_dapm_carkitr_control),
> /* HandsfreeL/R */
> - SND_SOC_DAPM_MUX("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
> - &twl4030_dapm_handsfreel_control),
> - SND_SOC_DAPM_MUX("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
> - &twl4030_dapm_handsfreer_control),
> + SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
> + &twl4030_dapm_handsfreel_control, handsfree_event,
> + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
> + SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
> + &twl4030_dapm_handsfreer_control, handsfree_event,
> + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
>
> SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0),
> SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0),
> diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
> index a2065d4..54615c7 100644
> --- a/sound/soc/codecs/twl4030.h
> +++ b/sound/soc/codecs/twl4030.h
> @@ -191,6 +191,12 @@
> #define TWL4030_RAMP_DELAY_2581MS 0x1C
> #define TWL4030_RAMP_EN 0x02
>
> +/* HFL_CTL (0x29, 0x2A) Fields */
> +#define TWL4030_HF_CTL_HB_EN 0x04
> +#define TWL4030_HF_CTL_LOOP_EN 0x08
> +#define TWL4030_HF_CTL_RAMP_EN 0x10
> +#define TWL4030_HF_CTL_REF_EN 0x20
> +
> /* APLL_CTL (0x3A) Fields */
>
> #define TWL4030_APLL_EN 0x10
prev parent reply other threads:[~2008-12-11 15:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-11 1:52 [PATCH] TWL4030: Add event callback to enable hands-free Stanley.Miao
2008-12-11 12:53 ` Mark Brown
2008-12-11 15:28 ` [PATCHv2] TWL4030: hands-free start-up sequence Stanley.Miao
2008-12-11 15:32 ` stanley.miao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1229009568.7494.18.camel@localhost \
--to=stanley.miao@windriver.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@sirena.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.