All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, "Michael Chan" <mchan@broadcom.com>,
	andy@greyhouse.net
Subject: [PATCH 3/5] tg3: Remove unused cfgspc device members
Date: Wed, 17 Dec 2008 18:23:13 -0800	[thread overview]
Message-ID: <1229717360.5502@xw6200> (raw)

This patch removes the pci_bist and pci_hdr_type members from the
device structure and removes the code that references them.  They are
not really used.

The patch rounds out the changes by moving the pci_cmd member to plug
a structure hole that would have been created.  On 32-bit systems, this
movement removes a subsequent structure hole later in the structure. On
64-bit systems though, the movement merely consolidates two holes into
one larger hole.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
 drivers/net/tg3.c |   23 ++++++-----------------
 drivers/net/tg3.h |    4 +---
 2 files changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9af8c9b..218c11a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12160,7 +12160,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		{ },
 	};
 	u32 misc_ctrl_reg;
-	u32 cacheline_sz_reg;
 	u32 pci_state_reg, grc_misc_cfg;
 	u32 val;
 	u16 pci_cmd;
@@ -12330,14 +12329,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
 			       tp->misc_host_ctrl);
 
-	pci_read_config_dword(tp->pdev, TG3PCI_CACHELINESZ,
-			      &cacheline_sz_reg);
-
-	tp->pci_cacheline_sz = (cacheline_sz_reg >>  0) & 0xff;
-	tp->pci_lat_timer    = (cacheline_sz_reg >>  8) & 0xff;
-	tp->pci_hdr_type     = (cacheline_sz_reg >> 16) & 0xff;
-	tp->pci_bist         = (cacheline_sz_reg >> 24) & 0xff;
-
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
 	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
 		tp->pdev_peer = tg3_find_peer(tp);
@@ -12447,17 +12438,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
 		tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
 
+	pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
+			     &tp->pci_cacheline_sz);
+	pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER,
+			     &tp->pci_lat_timer);
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
 	    tp->pci_lat_timer < 64) {
 		tp->pci_lat_timer = 64;
-
-		cacheline_sz_reg  = ((tp->pci_cacheline_sz & 0xff) <<  0);
-		cacheline_sz_reg |= ((tp->pci_lat_timer    & 0xff) <<  8);
-		cacheline_sz_reg |= ((tp->pci_hdr_type     & 0xff) << 16);
-		cacheline_sz_reg |= ((tp->pci_bist         & 0xff) << 24);
-
-		pci_write_config_dword(tp->pdev, TG3PCI_CACHELINESZ,
-				       cacheline_sz_reg);
+		pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
+				      tp->pci_lat_timer);
 	}
 
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX) {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index f3cda64..814d82b 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2676,10 +2676,9 @@ struct tg3 {
 
 	/* PCI block */
 	u32				pci_chip_rev_id;
+	u16				pci_cmd;
 	u8				pci_cacheline_sz;
 	u8				pci_lat_timer;
-	u8				pci_hdr_type;
-	u8				pci_bist;
 
 	int				pm_cap;
 	int				msi_cap;
@@ -2730,7 +2729,6 @@ struct tg3 {
 
 	u32				led_ctrl;
 	u32				phy_otp;
-	u16				pci_cmd;
 
 	char				board_part_number[24];
 #define TG3_VER_SIZE 32
-- 
1.5.6.4



             reply	other threads:[~2008-12-19 20:09 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-18  2:23 Matt Carlson [this message]
2008-12-22  4:22 ` [PATCH 3/5] tg3: Remove unused cfgspc device members David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1229717360.5502@xw6200 \
    --to=mcarlson@broadcom.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=mchan@broadcom.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.