From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Roskin Date: Sun, 28 Dec 2008 16:55:57 -0500 Subject: [ath9k-devel] ath9k for ar9102 and ar9103, OpenWRT, AP81 router hardware In-Reply-To: References: Message-ID: <1230501357.25726.16.camel@dv> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On Sat, 2008-12-27 at 15:45 -0800, Stephen Gutknecht (hilltx) wrote: > As you can see, they use the ath_ahb driver. Any overview or details > relative to what it will take to adapt the ath9k driver to work with > the AHB bus are appreciated. The first step would be to take current MadWifi sources, go through the differences between if_ath_ahb.[ch] and if_ath_pci.[ch] and apply those differences to the ath9k driver. When the modified driver is working with the AHB device, the differences should be restructured to have a PCI module, an AHB module and a common library. Perhaps there will be some questions that will need to be communicated to Atheros. -- Regards, Pavel Roskin