From: Alex Williamson <alex.williamson@hp.com>
To: Rusty Russell <rusty@rustcorp.com.au>
Cc: kvm <kvm@vger.kernel.org>, netdev <netdev@vger.kernel.org>,
Mark McLoughlin <markmc@redhat.com>
Subject: [PATCH 1/2][RFC] virtio_net: Enable setting MAC, promisc, and allmulti mode
Date: Wed, 07 Jan 2009 11:06:02 -0700 [thread overview]
Message-ID: <1231351562.7109.129.camel@lappy> (raw)
virtio_net: Enable setting MAC, promisc, and allmulti mode
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
---
drivers/net/virtio_net.c | 79 ++++++++++++++++++++++++++++++++++++++++----
include/linux/virtio_net.h | 11 ++++++
2 files changed, 82 insertions(+), 8 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 3af5e33..f502edd 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -41,7 +41,14 @@ struct virtnet_info
struct virtqueue *rvq, *svq;
struct net_device *dev;
struct napi_struct napi;
- unsigned int status;
+ union {
+ u16 raw;
+ struct {
+ u16 link:1;
+ u16 promisc:1;
+ u16 allmulti:1;
+ } bits;
+ } status;
/* The skb we couldn't send because buffers were full. */
struct sk_buff *last_xmit_skb;
@@ -476,6 +483,54 @@ static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
return ethtool_op_set_tx_hw_csum(dev, data);
}
+static int virtnet_set_mac_address(struct net_device *dev, void *p)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct virtio_device *vdev = vi->vdev;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
+ dev->dev_addr, dev->addr_len);
+
+ return 0;
+}
+
+static void virtnet_set_rx_mode(struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct virtio_device *vdev = vi->vdev;
+ u16 status = vi->status.raw;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS))
+ return;
+
+ if (dev->flags & IFF_PROMISC)
+ status |= VIRTIO_NET_S_PROMISC;
+ else
+ status &= ~VIRTIO_NET_S_PROMISC;
+
+ if (dev->flags & IFF_ALLMULTI)
+ status |= VIRTIO_NET_S_ALLMULTI;
+ else
+ status &= ~VIRTIO_NET_S_ALLMULTI;
+
+ if (dev->uc_count)
+ status |= VIRTIO_NET_S_PROMISC;
+ if (dev->mc_count)
+ status |= VIRTIO_NET_S_ALLMULTI;
+
+ if (status != vi->status.raw) {
+ vi->status.raw = status;
+ vdev->config->set(vdev, offsetof(struct virtio_net_config,
+ status), &vi->status, sizeof(vi->status));
+ }
+}
+
static struct ethtool_ops virtnet_ethtool_ops = {
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
@@ -494,14 +549,15 @@ static void virtnet_update_status(struct virtnet_info *vi)
&v, sizeof(v));
/* Ignore unknown (future) status bits */
- v &= VIRTIO_NET_S_LINK_UP;
+ v &= VIRTIO_NET_S_LINK_UP | VIRTIO_NET_S_PROMISC |
+ VIRTIO_NET_S_ALLMULTI;
- if (vi->status == v)
+ if (vi->status.raw == v)
return;
- vi->status = v;
+ vi->status.raw = v;
- if (vi->status & VIRTIO_NET_S_LINK_UP) {
+ if (vi->status.bits.link) {
netif_carrier_on(vi->dev);
netif_wake_queue(vi->dev);
} else {
@@ -563,8 +619,17 @@ static int virtnet_probe(struct virtio_device *vdev)
vdev->config->get(vdev,
offsetof(struct virtio_net_config, mac),
dev->dev_addr, dev->addr_len);
- } else
+ } else {
+ struct sockaddr addr;
+
random_ether_addr(dev->dev_addr);
+ memset(&addr, 0, sizeof(addr));
+ memcpy(&addr.sa_data, dev->dev_addr, dev->addr_len);
+ virtnet_set_mac_address(dev, &addr);
+ }
+
+ dev->set_mac_address = virtnet_set_mac_address;
+ dev->set_rx_mode = virtnet_set_rx_mode;
/* Set up our device-specific information */
vi = netdev_priv(dev);
@@ -621,7 +686,7 @@ static int virtnet_probe(struct virtio_device *vdev)
goto unregister;
}
- vi->status = VIRTIO_NET_S_LINK_UP;
+ vi->status.raw = VIRTIO_NET_S_LINK_UP;
virtnet_update_status(vi);
pr_debug("virtnet: registered device %s\n", dev->name);
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index d9174be..5a70edb 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -23,6 +23,8 @@
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
+#define VIRTIO_NET_S_PROMISC 2 /* Promiscuous mode */
+#define VIRTIO_NET_S_ALLMULTI 4 /* All-multicast mode */
struct virtio_net_config
{
@@ -30,7 +32,14 @@ struct virtio_net_config
__u8 mac[6];
/* Status supplied by host; see VIRTIO_NET_F_STATUS and VIRTIO_NET_S_*
* bits above */
- __u16 status;
+ union {
+ __u16 raw;
+ struct {
+ __u16 link:1;
+ __u16 promisc:1;
+ __u16 allmulti:1;
+ } bits;
+ } status;
} __attribute__((packed));
/* This is the first element of the scatter-gather list. If you don't
next reply other threads:[~2009-01-07 18:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-07 18:06 Alex Williamson [this message]
2009-01-09 11:34 ` [PATCH 1/2][RFC] virtio_net: Enable setting MAC, promisc, and allmulti mode Mark McLoughlin
2009-01-09 15:34 ` Alex Williamson
2009-01-10 10:43 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1231351562.7109.129.camel@lappy \
--to=alex.williamson@hp.com \
--cc=kvm@vger.kernel.org \
--cc=markmc@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.