From: Avi Kivity <avi@redhat.com>
To: Sheng Yang <sheng@linux.intel.com>
Cc: kvm@vger.kernel.org
Subject: [PATCH 1/2] kvm: libkvm: support for irq routing
Date: Wed, 14 Jan 2009 15:53:10 +0200 [thread overview]
Message-ID: <1231941191-966-2-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1231941191-966-1-git-send-email-avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
libkvm/kvm-common.h | 4 ++
libkvm/libkvm.c | 107 +++++++++++++++++++++++++++++++++++++++++++++++++++
libkvm/libkvm.h | 62 +++++++++++++++++++++++++++++
3 files changed, 173 insertions(+), 0 deletions(-)
diff --git a/libkvm/kvm-common.h b/libkvm/kvm-common.h
index c5beacc..e09c07c 100644
--- a/libkvm/kvm-common.h
+++ b/libkvm/kvm-common.h
@@ -61,6 +61,10 @@ struct kvm_context {
int pit_in_kernel;
/// in-kernel coalesced mmio
int coalesced_mmio;
+#ifdef KVM_CAP_IRQ_ROUTING
+ struct kvm_irq_routing *irq_routes;
+ int nr_allocated_irq_routes;
+#endif
};
void init_slots(void);
diff --git a/libkvm/libkvm.c b/libkvm/libkvm.c
index 0408fdb..1004fa6 100644
--- a/libkvm/libkvm.c
+++ b/libkvm/libkvm.c
@@ -381,6 +381,14 @@ int kvm_create_vm(kvm_context_t kvm)
{
int fd = kvm->fd;
+#ifdef KVM_CAP_IRQ_ROUTING
+ kvm->irq_routes = malloc(sizeof(*kvm->irq_routes));
+ if (!kvm->irq_routes)
+ return -ENOMEM;
+ memset(kvm->irq_routes, 0, sizeof(*kvm->irq_routes));
+ kvm->nr_allocated_irq_routes = 0;
+#endif
+
kvm->vcpu_fd[0] = -1;
fd = ioctl(fd, KVM_CREATE_VM, 0);
@@ -1164,3 +1172,102 @@ int kvm_reinject_control(kvm_context_t kvm, int pit_reinject)
#endif
return -ENOSYS;
}
+
+int kvm_has_gsi_routing(kvm_context_t kvm)
+{
+ int r = 0;
+
+#ifdef KVM_CAP_IRQ_ROUTING
+ r = kvm_check_extension(kvm, KVM_CAP_IRQ_ROUTING);
+#endif
+ return r;
+}
+
+int kvm_get_gsi_count(kvm_context_t kvm)
+{
+#ifdef KVM_CAP_IRQ_ROUTING
+ return kvm_check_extension(kvm, KVM_CAP_IRQ_ROUTING);
+#else
+ return -EINVAL;
+#endif
+}
+
+int kvm_clear_gsi_routes(kvm_context_t kvm)
+{
+#ifdef KVM_CAP_IRQ_ROUTING
+ kvm->irq_routes->nr = 0;
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
+
+int kvm_add_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin)
+{
+#ifdef KVM_CAP_IRQ_ROUTING
+ struct kvm_irq_routing *z;
+ struct kvm_irq_routing_entry *e;
+ int n, size;
+
+ if (kvm->irq_routes->nr == kvm->nr_allocated_irq_routes) {
+ n = kvm->nr_allocated_irq_routes * 2;
+ if (n < 64)
+ n = 64;
+ size = sizeof(struct kvm_irq_routing);
+ size += n * sizeof(*e);
+ z = realloc(kvm->irq_routes, size);
+ if (!z)
+ return -ENOMEM;
+ kvm->nr_allocated_irq_routes = n;
+ kvm->irq_routes = z;
+ }
+ n = kvm->irq_routes->nr++;
+ e = &kvm->irq_routes->entries[n];
+ memset(e, 0, sizeof(*e));
+ e->gsi = gsi;
+ e->type = KVM_IRQ_ROUTING_IRQCHIP;
+ e->flags = 0;
+ e->u.irqchip.irqchip = irqchip;
+ e->u.irqchip.pin = pin;
+ return 0;
+#else
+ return -ENOSYS;
+#endif
+}
+
+int kvm_del_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin)
+{
+#ifdef KVM_CAP_IRQ_ROUTING
+ struct kvm_irq_routing_entry *e, *p;
+ int i;
+
+ for (i = 0; i < kvm->irq_routes->nr; ++i) {
+ e = &kvm->irq_routes->entries[i];
+ if (e->type == KVM_IRQ_ROUTING_IRQCHIP
+ && e->gsi == gsi
+ && e->u.irqchip.irqchip == irqchip
+ && e->u.irqchip.pin == pin) {
+ p = &kvm->irq_routes->entries[--kvm->irq_routes->nr];
+ *e = *p;
+ return 0;
+ }
+ }
+ return -ESRCH;
+#else
+ return -ENOSYS;
+#endif
+}
+
+int kvm_commit_irq_routes(kvm_context_t kvm)
+{
+#ifdef KVM_CAP_IRQ_ROUTING
+ int r;
+
+ kvm->irq_routes->flags = 0;
+ r = ioctl(kvm->vm_fd, KVM_SET_GSI_ROUTING, kvm->irq_routes);
+ if (r == -1)
+ r = -errno;
+#else
+ return -ENOSYS;
+#endif
+}
diff --git a/libkvm/libkvm.h b/libkvm/libkvm.h
index ee1ba68..85012ff 100644
--- a/libkvm/libkvm.h
+++ b/libkvm/libkvm.h
@@ -720,4 +720,66 @@ int kvm_assign_irq(kvm_context_t kvm,
*/
int kvm_destroy_memory_region_works(kvm_context_t kvm);
#endif
+
+
+/*!
+ * \brief Checks whether the generic irq routing capability is present
+ *
+ * Checks whether kvm can reroute interrupts among the various interrupt
+ * controllers.
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_has_gsi_routing(kvm_context_t kvm);
+
+/*!
+ * \brief Determines the number of gsis that can be routed
+ *
+ * Returns the number of distinct gsis that can be routed by kvm. This is
+ * also the number of distinct routes (if a gsi has two routes, than another
+ * gsi cannot be used...)
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_get_gsi_count(kvm_context_t kvm);
+
+/*!
+ * \brief Clears the temporary irq routing table
+ *
+ * Clears the temporary irq routing table. Nothing is committed to the
+ * running VM.
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_clear_gsi_routes(kvm_context_t kvm);
+
+/*!
+ * \brief Adds an irq route to the temporary irq routing table
+ *
+ * Adds an irq route to the temporary irq routing table. Nothing is
+ * committed to the running VM.
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_add_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin);
+
+/*!
+ * \brief Removes an irq route from the temporary irq routing table
+ *
+ * Adds an irq route to the temporary irq routing table. Nothing is
+ * committed to the running VM.
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_del_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin);
+
+/*!
+ * \brief Commit the temporary irq routing table
+ *
+ * Commit the temporary irq routing table to the running VM.
+ *
+ * \param kvm Pointer to the current kvm_context
+ */
+int kvm_commit_irq_routes(kvm_context_t kvm);
+
#endif
--
1.6.0.6
next prev parent reply other threads:[~2009-01-14 13:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-14 13:53 [PATCH 0/2] irq routing userspace Avi Kivity
2009-01-14 13:53 ` Avi Kivity [this message]
2009-01-15 6:17 ` [PATCH 1/2] kvm: libkvm: support for irq routing Sheng Yang
2009-01-15 6:20 ` Sheng Yang
2009-01-15 9:59 ` Avi Kivity
2009-01-15 10:05 ` Sheng Yang
2009-01-15 10:10 ` Avi Kivity
2009-01-15 9:58 ` Avi Kivity
2009-01-14 13:53 ` [PATCH 2/2] kvm: qemu: initialize irq routing table Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1231941191-966-2-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=sheng@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.