From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Ian Molton <ian@mnementh.co.uk>
Subject: [PATCH 3/4] ASoC: machine driver for Toshiba e750
Date: Fri, 16 Jan 2009 17:15:14 +0000 [thread overview]
Message-ID: <1232126115-1966-3-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1232126115-1966-2-git-send-email-broonie@opensource.wolfsonmicro.com>
From: Ian Molton <ian@mnementh.co.uk>
This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750
PDA. It includes support for powering up / down the external headphone and
speaker amplifiers on this machine.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-pxa/e750.c | 5 +
arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 +
sound/soc/pxa/Kconfig | 9 ++
sound/soc/pxa/Makefile | 2 +
sound/soc/pxa/e750_wm9705.c | 189 +++++++++++++++++++++++++
5 files changed, 210 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/pxa/e750_wm9705.c
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8e..665066f 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = {
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+ /* Audio power control */
+ GPIO4_GPIO, /* Headphone amp power */
+ GPIO7_GPIO, /* Speaker amp power */
+ GPIO37_GPIO, /* Headphone detect */
+
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index efbd2aa..02b28e0 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -45,6 +45,11 @@
/* e7xx IrDA power control */
#define GPIO_E7XX_IR_OFF 38
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF 4
+#define GPIO_E750_SPK_AMP_OFF 7
+#define GPIO_E750_HP_DETECT 37
+
/* ASIC related GPIOs */
#define GPIO_ESERIES_TMIO_IRQ 5
#define GPIO_ESERIES_TMIO_PCLR 19
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index f82e106..b9b1a3f 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA
Say Y if you want to add support for SoC audio on Sharp
Zaurus SL-C6000x models (Tosa).
+config SND_PXA2XX_SOC_E750
+ tristate "SoC AC97 Audio support for e750"
+ depends on SND_PXA2XX_SOC && MACH_E750
+ select SND_SOC_WM9705
+ select SND_PXA2XX_SOC_AC97
+ help
+ Say Y if you want to add support for SoC audio on the
+ toshiba e750 PDA
+
config SND_PXA2XX_SOC_E800
tristate "SoC AC97 Audio support for e800"
depends on SND_PXA2XX_SOC && MACH_E800
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 08a9f27..c7d4cce 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o
snd-soc-corgi-objs := corgi.o
snd-soc-poodle-objs := poodle.o
snd-soc-tosa-objs := tosa.o
+snd-soc-e750-objs := e750_wm9705.o
snd-soc-e800-objs := e800_wm9712.o
snd-soc-spitz-objs := spitz.o
snd-soc-em-x270-objs := em-x270.o
@@ -22,6 +23,7 @@ snd-soc-zylonite-objs := zylonite.o
obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o
+obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o
obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o
obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c
new file mode 100644
index 0000000..20fbdcf
--- /dev/null
+++ b/sound/soc/pxa/e750_wm9705.c
@@ -0,0 +1,189 @@
+/*
+ * e750-wm9705.c -- SoC audio for e750
+ *
+ * Copyright 2007 (c) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 ONLY.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/eseries-gpio.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm9705.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-ac97.h"
+
+static int e750_spk_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ if (event & SND_SOC_DAPM_PRE_PMU)
+ gpio_set_value(GPIO_E750_SPK_AMP_OFF, 0);
+ else if (event & SND_SOC_DAPM_POST_PMD)
+ gpio_set_value(GPIO_E750_SPK_AMP_OFF, 1);
+
+ return 0;
+}
+
+static int e750_hp_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ if (event & SND_SOC_DAPM_PRE_PMU)
+ gpio_set_value(GPIO_E750_HP_AMP_OFF, 0);
+ else if (event & SND_SOC_DAPM_POST_PMD)
+ gpio_set_value(GPIO_E750_HP_AMP_OFF, 1);
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget e750_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_MIC("Mic (Internal)", NULL),
+ SND_SOC_DAPM_PGA_E("Headphone Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
+ e750_hp_amp_event, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PGA_E("Speaker Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
+ e750_spk_amp_event, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ {"Headphone Amp", NULL, "HPOUTL"},
+ {"Headphone Amp", NULL, "HPOUTR"},
+ {"Headphone Jack", NULL, "Headphone Amp"},
+
+ {"Speaker Amp", NULL, "MONOOUT"},
+ {"Speaker", NULL, "Speaker Amp"},
+
+ {"MIC1", NULL, "Mic (Internal)"},
+};
+
+static int e750_ac97_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_nc_pin(codec, "LOUT");
+ snd_soc_dapm_nc_pin(codec, "ROUT");
+ snd_soc_dapm_nc_pin(codec, "PHONE");
+ snd_soc_dapm_nc_pin(codec, "LINEINL");
+ snd_soc_dapm_nc_pin(codec, "LINEINR");
+ snd_soc_dapm_nc_pin(codec, "CDINL");
+ snd_soc_dapm_nc_pin(codec, "CDINR");
+ snd_soc_dapm_nc_pin(codec, "PCBEEP");
+ snd_soc_dapm_nc_pin(codec, "MIC2");
+
+ snd_soc_dapm_new_controls(codec, e750_dapm_widgets,
+ ARRAY_SIZE(e750_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link e750_dai[] = {
+ {
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
+ .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI],
+ .init = e750_ac97_init,
+ /* use ops to check startup state */
+ },
+ {
+ .name = "AC97 Aux",
+ .stream_name = "AC97 Aux",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
+ .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX],
+ },
+};
+
+static struct snd_soc_card e750 = {
+ .name = "Toshiba e750",
+ .platform = &pxa2xx_soc_platform,
+ .dai_link = e750_dai,
+ .num_links = ARRAY_SIZE(e750_dai),
+};
+
+static struct snd_soc_device e750_snd_devdata = {
+ .card = &e750,
+ .codec_dev = &soc_codec_dev_wm9705,
+};
+
+static struct platform_device *e750_snd_device;
+
+static int __init e750_init(void)
+{
+ int ret;
+
+ if (!machine_is_e750())
+ return -ENODEV;
+
+ ret = gpio_request(GPIO_E750_HP_AMP_OFF, "Headphone amp");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(GPIO_E750_SPK_AMP_OFF, "Speaker amp");
+ if (ret)
+ goto free_hp_amp_gpio;
+
+ ret = gpio_direction_output(GPIO_E750_HP_AMP_OFF, 1);
+ if (ret)
+ goto free_spk_amp_gpio;
+
+ ret = gpio_direction_output(GPIO_E750_SPK_AMP_OFF, 1);
+ if (ret)
+ goto free_spk_amp_gpio;
+
+ e750_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!e750_snd_device) {
+ ret = -ENOMEM;
+ goto free_spk_amp_gpio;
+ }
+
+ platform_set_drvdata(e750_snd_device, &e750_snd_devdata);
+ e750_snd_devdata.dev = &e750_snd_device->dev;
+ ret = platform_device_add(e750_snd_device);
+
+ if (!ret)
+ return 0;
+
+/* Fail gracefully */
+ platform_device_put(e750_snd_device);
+free_spk_amp_gpio:
+ gpio_free(GPIO_E750_SPK_AMP_OFF);
+free_hp_amp_gpio:
+ gpio_free(GPIO_E750_HP_AMP_OFF);
+
+ return ret;
+}
+
+static void __exit e750_exit(void)
+{
+ platform_device_unregister(e750_snd_device);
+ gpio_free(GPIO_E750_SPK_AMP_OFF);
+ gpio_free(GPIO_E750_HP_AMP_OFF);
+}
+
+module_init(e750_init);
+module_exit(e750_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("ALSA SoC driver for e750");
+MODULE_LICENSE("GPL v2");
--
1.5.6.5
next prev parent reply other threads:[~2009-01-16 17:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-16 17:13 ASoC updates for 2.6.30 Mark Brown
2009-01-16 17:15 ` [PATCH 1/4] ASoC: DaVinci: Fix SFFSDR compilation error Mark Brown
2009-01-16 17:15 ` [PATCH 2/4] ASoC: Driver for the WM9705 AC97 codec Mark Brown
2009-01-16 17:15 ` Mark Brown [this message]
2009-01-16 17:15 ` [PATCH 4/4] ASoC: machine driver for Toshiba e800 Mark Brown
2009-01-16 17:26 ` ASoC updates for 2.6.30 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232126115-1966-3-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=ian@mnementh.co.uk \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.