From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joe Perches Date: Thu, 22 Jan 2009 13:26:47 -0800 Subject: [Cluster-devel] [PATCH] fs/dlm/lowcomms.c: comment typo fixes Message-ID: <1232659607.15489.68.camel@localhost> List-Id: To: cluster-devel.redhat.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Signed-off-by: Joe Perches diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c index 103a5eb..982314c 100644 --- a/fs/dlm/lowcomms.c +++ b/fs/dlm/lowcomms.c @@ -21,7 +21,7 @@ * * Cluster nodes are referred to by their nodeids. nodeids are * simply 32 bit numbers to the locking module - if they need to - * be expanded for the cluster infrastructure then that is it's + * be expanded for the cluster infrastructure then that is its * responsibility. It is this layer's * responsibility to resolve these into IP address or * whatever it needs for inter-node communication. @@ -36,9 +36,9 @@ * of high load. Also, this way, the sending thread can collect together * messages bound for one node and send them in one block. * - * lowcomms will choose to use wither TCP or SCTP as its transport layer + * lowcomms will choose to use either TCP or SCTP as its transport layer * depending on the configuration variable 'protocol'. This should be set - * to 0 (default) for TCP or 1 for SCTP. It shouldbe configured using a + * to 0 (default) for TCP or 1 for SCTP. It should be configured using a * cluster-wide mechanism as it must be the same on all nodes of the cluster * for the DLM to function. *