net: struct device - replace bus_id with dev_name(), dev_set_name()

[Kay Sievers <kay.sievers@vrfy.org>]

From: Kay Sievers <kay.sievers@vrfy.org>
Subject: net: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: davem@davemloft.net
Cc: netdev@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
---
 drivers/net/arm/ks8695net.c  |    2 +-
 drivers/net/au1000_eth.c     |    8 ++++----
 drivers/net/bfin_mac.c       |   12 ++++++------
 drivers/net/bmac.c           |    2 +-
 drivers/net/cpmac.c          |    2 +-
 drivers/net/declance.c       |    6 +++---
 drivers/net/depca.c          |    6 +++---
 drivers/net/ehea/ehea_main.c |    2 +-
 drivers/net/jazzsonic.c      |    6 ++++--
 drivers/net/macb.c           |   10 +++++-----
 drivers/net/macsonic.c       |   15 ++++++++-------
 drivers/net/mv643xx_eth.c    |    2 +-
 drivers/net/sb1250-mac.c     |   10 +++++-----
 drivers/net/smc911x.c        |    2 +-
 drivers/net/smc91x.c         |    2 +-
 drivers/net/smsc911x.c       |    7 ++++---
 drivers/net/smsc9420.c       |    4 ++--
 drivers/net/tc35815.c        |    4 ++--
 drivers/net/xtsonic.c        |    2 +-
 19 files changed, 54 insertions(+), 50 deletions(-)

--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -1059,7 +1059,7 @@ ks8695_get_drvinfo(struct net_device *nd
 {
 	strlcpy(info->driver, MODULENAME, sizeof(info->driver));
 	strlcpy(info->version, MODULEVERSION, sizeof(info->version));
-	strlcpy(info->bus_info, ndev->dev.parent->bus_id,
+	strlcpy(info->bus_info, dev_name(ndev->dev.parent),
 		sizeof(info->bus_info));
 }
 
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -355,8 +355,8 @@ static int mii_probe (struct net_device
 	/* now we are supposed to have a proper phydev, to attach to... */
 	BUG_ON(phydev->attached_dev);
 
-	phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0,
-			PHY_INTERFACE_MODE_MII);
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &au1000_adjust_link,
+			0, PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
@@ -381,8 +381,8 @@ static int mii_probe (struct net_device
 	aup->phy_dev = phydev;
 
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d)\n",
-	       dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+	       "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	return 0;
 }
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -415,11 +415,11 @@ static int mii_probe(struct net_device *
 	}
 
 #if defined(CONFIG_BFIN_MAC_RMII)
-	phydev = phy_connect(dev, phydev->dev.bus_id, &bfin_mac_adjust_link, 0,
-			PHY_INTERFACE_MODE_RMII);
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
+			0, PHY_INTERFACE_MODE_RMII);
 #else
-	phydev = phy_connect(dev, phydev->dev.bus_id, &bfin_mac_adjust_link, 0,
-			PHY_INTERFACE_MODE_MII);
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
+			0, PHY_INTERFACE_MODE_MII);
 #endif
 
 	if (IS_ERR(phydev)) {
@@ -447,7 +447,7 @@ static int mii_probe(struct net_device *
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
 	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
 	       "@sclk=%dMHz)\n",
-	       DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq,
+	       DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
 	       MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
@@ -488,7 +488,7 @@ static void bfin_mac_ethtool_getdrvinfo(
 	strcpy(info->driver, DRV_NAME);
 	strcpy(info->version, DRV_VERSION);
 	strcpy(info->fw_version, "N/A");
-	strcpy(info->bus_info, dev->dev.bus_id);
+	strcpy(info->bus_info, dev_name(&dev->dev));
 }
 
 static struct ethtool_ops bfin_mac_ethtool_ops = {
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1240,7 +1240,7 @@ static void bmac_get_drvinfo(struct net_
 {
 	struct bmac_data *bp = netdev_priv(dev);
 	strcpy(info->driver, "bmac");
-	strcpy(info->bus_info, bp->mdev->ofdev.dev.bus_id);
+	strcpy(info->bus_info, dev_name(&bp->mdev->ofdev.dev));
 }
 
 static const struct ethtool_ops bmac_ethtool_ops = {
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1161,7 +1161,7 @@ static int __devinit cpmac_probe(struct
 	priv->msg_enable = netif_msg_init(debug_level, 0xff);
 	memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
 
-	priv->phy = phy_connect(dev, cpmac_mii->phy_map[phy_id]->dev.bus_id,
+	priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
 				&cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
 	if (IS_ERR(priv->phy)) {
 		if (netif_msg_drv(priv))
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1027,7 +1027,7 @@ static int __init dec_lance_probe(struct
 		printk(version);
 
 	if (bdev)
-		snprintf(name, sizeof(name), "%s", bdev->bus_id);
+		snprintf(name, sizeof(name), "%s", dev_name(bdev));
 	else {
 		i = 0;
 		dev = root_lance_dev;
@@ -1105,10 +1105,10 @@ static int __init dec_lance_probe(struct
 
 		start = to_tc_dev(bdev)->resource.start;
 		len = to_tc_dev(bdev)->resource.end - start + 1;
-		if (!request_mem_region(start, len, bdev->bus_id)) {
+		if (!request_mem_region(start, len, dev_name(bdev))) {
 			printk(KERN_ERR
 			       "%s: Unable to reserve MMIO resource\n",
-			       bdev->bus_id);
+			       dev_name(bdev));
 			ret = -EBUSY;
 			goto err_out_dev;
 		}
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -606,8 +606,8 @@ static int __init depca_hw_init (struct
 	if (!mem_start || lp->adapter < DEPCA || lp->adapter >=unknown)
 		return -ENXIO;
 
-	printk ("%s: %s at 0x%04lx",
-	        device->bus_id, depca_signature[lp->adapter], ioaddr);
+	printk("%s: %s at 0x%04lx",
+	       dev_name(device), depca_signature[lp->adapter], ioaddr);
 
 	switch (lp->depca_bus) {
 #ifdef CONFIG_MCA
@@ -669,7 +669,7 @@ static int __init depca_hw_init (struct
 
 	spin_lock_init(&lp->lock);
 	sprintf(lp->adapter_name, "%s (%s)",
-		depca_signature[lp->adapter], device->bus_id);
+		depca_signature[lp->adapter], dev_name(device));
 	status = -EBUSY;
 
 	/* Initialisation Block */
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3040,7 +3040,7 @@ static struct device *ehea_register_port
 	port->ofdev.dev.parent = &port->adapter->ofdev->dev;
 	port->ofdev.dev.bus = &ibmebus_bus_type;
 
-	sprintf(port->ofdev.dev.bus_id, "port%d", port_name_cnt++);
+	dev_set_name(&port->ofdev.dev, "port%d", port_name_cnt++);
 	port->ofdev.dev.release = logical_port_release;
 
 	ret = of_device_register(&port->ofdev);
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -131,7 +131,8 @@ static int __init sonic_probe1(struct ne
 	if (sonic_debug  &&  version_printed++ == 0)
 		printk(version);
 
-	printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", lp->device->bus_id, dev->base_addr);
+	printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ",
+	       dev_name(lp->device), dev->base_addr);
 
 	/*
 	 * Put the sonic into software reset, then
@@ -156,7 +157,8 @@ static int __init sonic_probe1(struct ne
 	if ((lp->descriptors = dma_alloc_coherent(lp->device,
 				SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
 				&lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
+		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n",
+		       dev_name(lp->device));
 		goto out;
 	}
 
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -211,10 +211,10 @@ static int macb_mii_probe(struct net_dev
 
 	/* attach the mac to the phy */
 	if (pdata && pdata->is_rmii) {
-		phydev = phy_connect(dev, phydev->dev.bus_id,
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
 			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
 	} else {
-		phydev = phy_connect(dev, phydev->dev.bus_id,
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
 			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
 	}
 
@@ -1069,7 +1069,7 @@ static void macb_get_drvinfo(struct net_
 
 	strcpy(info->driver, bp->pdev->dev.driver->name);
 	strcpy(info->version, "$Revision: 1.14 $");
-	strcpy(info->bus_info, bp->pdev->dev.bus_id);
+	strcpy(info->bus_info, dev_name(&bp->pdev->dev));
 }
 
 static struct ethtool_ops macb_ethtool_ops = {
@@ -1226,8 +1226,8 @@ static int __init macb_probe(struct plat
 
 	phydev = bp->phy_dev;
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
-		"(mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+		"(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+		phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	return 0;
 
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -176,7 +176,8 @@ static int __init macsonic_init(struct n
 	if ((lp->descriptors = dma_alloc_coherent(lp->device,
 	            SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
 	            &lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
+		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n",
+		       dev_name(lp->device));
 		return -ENOMEM;
 	}
 
@@ -337,7 +338,7 @@ static int __init mac_onboard_sonic_prob
 		sonic_version_printed = 1;
 	}
 	printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
-	       lp->device->bus_id, dev->base_addr);
+	       dev_name(lp->device), dev->base_addr);
 
 	/* The PowerBook's SONIC is 16 bit always. */
 	if (macintosh_config->ident == MAC_MODEL_PB520) {
@@ -370,10 +371,10 @@ static int __init mac_onboard_sonic_prob
 	}
 	printk(KERN_INFO
 	       "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
-	       lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset);
+	       dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
 
 #if 0 /* This is sometimes useful to find out how MacOS configured the card. */
-	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
 	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
 #endif
 
@@ -525,12 +526,12 @@ static int __init mac_nubus_sonic_probe(
 		sonic_version_printed = 1;
 	}
 	printk(KERN_INFO "%s: %s in slot %X\n",
-	       lp->device->bus_id, ndev->board->name, ndev->board->slot);
+	       dev_name(lp->device), ndev->board->name, ndev->board->slot);
 	printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
-	       lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
+	       dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
 
 #if 0 /* This is sometimes useful to find out how MacOS configured the card. */
-	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
 	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
 #endif
 
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2586,7 +2586,7 @@ static void phy_init(struct mv643xx_eth_
 
 	phy_reset(mp);
 
-	phy_attach(mp->dev, phy->dev.bus_id, 0, PHY_INTERFACE_MODE_GMII);
+	phy_attach(mp->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_GMII);
 
 	if (speed == 0) {
 		phy->autoneg = AUTONEG_ENABLE;
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2478,7 +2478,7 @@ static int sbmac_mii_probe(struct net_de
 		return -ENXIO;
 	}
 
-	phy_dev = phy_connect(dev, phy_dev->dev.bus_id, &sbmac_mii_poll, 0,
+	phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 0,
 			      PHY_INTERFACE_MODE_GMII);
 	if (IS_ERR(phy_dev)) {
 		printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
@@ -2500,7 +2500,7 @@ static int sbmac_mii_probe(struct net_de
 
 	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
 		dev->name, phy_dev->drv->name,
-		phy_dev->dev.bus_id, phy_dev->irq);
+		dev_name(&phy_dev->dev), phy_dev->irq);
 
 	sc->phy_dev = phy_dev;
 
@@ -2697,7 +2697,7 @@ static int __init sbmac_probe(struct pla
 	sbm_base = ioremap_nocache(res->start, res->end - res->start + 1);
 	if (!sbm_base) {
 		printk(KERN_ERR "%s: unable to map device registers\n",
-		       pldev->dev.bus_id);
+		       dev_name(&pldev->dev));
 		err = -ENOMEM;
 		goto out_out;
 	}
@@ -2708,7 +2708,7 @@ static int __init sbmac_probe(struct pla
 	 * If we find a zero, skip this MAC.
 	 */
 	sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR);
-	pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", pldev->dev.bus_id,
+	pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", dev_name(&pldev->dev),
 		 sbmac_orig_hwaddr ? "" : "not ", (long long)res->start);
 	if (sbmac_orig_hwaddr == 0) {
 		err = 0;
@@ -2721,7 +2721,7 @@ static int __init sbmac_probe(struct pla
 	dev = alloc_etherdev(sizeof(struct sbmac_softc));
 	if (!dev) {
 		printk(KERN_ERR "%s: unable to allocate etherdev\n",
-		       pldev->dev.bus_id);
+		       dev_name(&pldev->dev));
 		err = -ENOMEM;
 		goto out_unmap;
 	}
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1545,7 +1545,7 @@ smc911x_ethtool_getdrvinfo(struct net_de
 {
 	strncpy(info->driver, CARDNAME, sizeof(info->driver));
 	strncpy(info->version, version, sizeof(info->version));
-	strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
+	strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
 }
 
 static int smc911x_ethtool_nwayreset(struct net_device *dev)
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1614,7 +1614,7 @@ smc_ethtool_getdrvinfo(struct net_device
 {
 	strncpy(info->driver, CARDNAME, sizeof(info->driver));
 	strncpy(info->version, version, sizeof(info->version));
-	strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
+	strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
 }
 
 static int smc_ethtool_nwayreset(struct net_device *dev)
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -769,7 +769,7 @@ static int smsc911x_mii_probe(struct net
 		return -ENODEV;
 	}
 
-	phydev = phy_connect(dev, phydev->dev.bus_id,
+	phydev = phy_connect(dev, dev_name(&phydev->dev),
 		&smsc911x_phy_adjust_link, 0, pdata->config.phy_interface);
 
 	if (IS_ERR(phydev)) {
@@ -778,7 +778,8 @@ static int smsc911x_mii_probe(struct net
 	}
 
 	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+		dev->name, phydev->drv->name,
+		dev_name(&phydev->dev), phydev->irq);
 
 	/* mask with MAC supported features */
 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
@@ -1545,7 +1546,7 @@ static void smsc911x_ethtool_getdrvinfo(
 {
 	strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver));
 	strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version));
-	strlcpy(info->bus_info, dev->dev.parent->bus_id,
+	strlcpy(info->bus_info, dev_name(dev->dev.parent),
 		sizeof(info->bus_info));
 }
 
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1156,7 +1156,7 @@ static int smsc9420_mii_probe(struct net
 	smsc_info(PROBE, "PHY addr %d, phy_id 0x%08X", phydev->addr,
 		phydev->phy_id);
 
-	phydev = phy_connect(dev, phydev->dev.bus_id,
+	phydev = phy_connect(dev, dev_name(&phydev->dev),
 		&smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
@@ -1165,7 +1165,7 @@ static int smsc9420_mii_probe(struct net
 	}
 
 	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+		dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	/* mask with MAC supported features */
 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -725,7 +725,7 @@ static int tc_mii_probe(struct net_devic
 	}
 
 	/* attach the mac to the phy */
-	phydev = phy_connect(dev, phydev->dev.bus_id,
+	phydev = phy_connect(dev, dev_name(&phydev->dev),
 			     &tc_handle_link_change, 0,
 			     lp->chiptype == TC35815_TX4939 ?
 			     PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII);
@@ -735,7 +735,7 @@ static int tc_mii_probe(struct net_devic
 	}
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
 		"(mii_bus:phy_addr=%s, id=%x)\n",
-		dev->name, phydev->drv->name, phydev->dev.bus_id,
+		dev->name, phydev->drv->name, dev_name(&phydev->dev),
 		phydev->phy_id);
 
 	/* mask with MAC supported features */
--- a/drivers/net/xtsonic.c
+++ b/drivers/net/xtsonic.c
@@ -183,7 +183,7 @@ static int __init sonic_probe1(struct ne
 
 	if (lp->descriptors == NULL) {
 		printk(KERN_ERR "%s: couldn't alloc DMA memory for "
-				" descriptors.\n", lp->device->bus_id);
+				" descriptors.\n", dev_name(lp->device));
 		goto out;
 	}