From: "Bartłomiej Holdenmayer" <bh@habah.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, aeleneski@comcast.net
Subject: Re: No sound for HP Pavilion DV4z
Date: Thu, 12 Feb 2009 02:07:29 +0100 [thread overview]
Message-ID: <1234400849.7314.2.camel@hplaptop> (raw)
In-Reply-To: <s5hiqngwklh.wl%tiwai@suse.de>
Dnia 2009-02-12, czw o godzinie 01:43 +0100, Takashi Iwai pisze:
> At Thu, 12 Feb 2009 01:29:40 +0100,
> Bartłomiej Holdenmayer wrote:
> >
> > Dnia 2009-02-12, czw o godzinie 00:51 +0100, Takashi Iwai pisze:
> > > At Thu, 12 Feb 2009 00:43:52 +0100,
> > > Bartłomiej Holdenmayer wrote:
> > > >
> > > > Dnia 2009-02-11, śro o godzinie 23:58 +0100, Takashi Iwai pisze:
> > > > > At Wed, 11 Feb 2009 22:15:30 +0000 (UTC),
> > > > > aeleneski@comcast.net wrote:
> > > > > >
> > > > > > Alright. Well, it again seems like a no go.
> > > > > > Ran all the commands, still no sound. Upon starting Amarok, I receive the
> > > > > > error "xine was unable to initialize any audio drivers."
> > > > >
> > > > > Could you try the patch below?
> > > > >
> > > > > Or, first load without probe_mask=1 option, give the command sequence
> > > > > and do echo to reconfig file.
> > > > >
> > > > >
> > > > > thanks,
> > > > >
> > > > > Takashi
> > > > >
> > > > > ---
> > > > > diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
> > > > > index 300ab40..482fb03 100644
> > > > > --- a/sound/pci/hda/hda_hwdep.c
> > > > > +++ b/sound/pci/hda/hda_hwdep.c
> > > > > @@ -175,7 +175,7 @@ static int reconfig_codec(struct hda_codec *codec)
> > > > > err = snd_hda_codec_build_controls(codec);
> > > > > if (err < 0)
> > > > > return err;
> > > > > - return 0;
> > > > > + return snd_card_register(codec->bus->card);
> > > > > }
> > > > >
> > > > > /*
> > > > > _______________________________________________
> > > > > Alsa-devel mailing list
> > > > > Alsa-devel@alsa-project.org
> > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > >
> > > > Can You explain what to do like for 6 years old kid?
> > >
> > > Well, I already merged the patch to sound git tree, so you just need
> > > to use the latest alsa-driver snapshot tree again from:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > >
> > >
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> > I did upgrade. No change. aplay -l still does not display hdmi.
>
> Then give alsa-info output again.
> Also, load with probe_only=1 option first and get alsa-info, too.
> Attach together with the relevant kernel messages.
>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
I am sorry, i messed up threads. I was writing about pavilion dv5. I
have problem with hdmi. Should i do what You wrote:
> Also, load with probe_only=1 option first and get alsa-info, too.
> Attach together with the relevant kernel messages.
?
--
Pozdrawiam / Regards
Bartłomiej Holdenmayer
GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-02-12 1:07 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1856646965.309841234390528103.JavaMail.root@sz0025a.westchester.pa.mail.comcast.net>
2009-02-11 22:15 ` No sound for HP Pavilion DV4z aeleneski
2009-02-11 22:58 ` Takashi Iwai
2009-02-11 23:43 ` Bartłomiej Holdenmayer
2009-02-11 23:51 ` Takashi Iwai
2009-02-12 0:29 ` Bartłomiej Holdenmayer
2009-02-12 0:43 ` Takashi Iwai
2009-02-12 1:07 ` Bartłomiej Holdenmayer [this message]
2009-02-12 7:03 ` Takashi Iwai
2009-02-25 0:17 ` Bartłomiej Holdenmayer
2009-02-25 6:31 ` Takashi Iwai
[not found] <23309100.763781234826876975.JavaMail.root@sz0025a.westchester.pa.mail.comcast.net>
[not found] ` <1532118107.763801234826883901.JavaMail.root@sz0025a.westchester.pa.mail.comcast.net>
2009-02-17 6:24 ` Takashi Iwai
[not found] ` <1982506676.396601235609917471.JavaMail.root@sz0025a.westchester.pa.mail.comcast.net>
2009-03-04 10:56 ` Takashi Iwai
[not found] <188698462.3091871233960154280.JavaMail.root@sz0025a.westchester.pa.mail.comcast.net>
2009-02-09 17:18 ` aeleneski
2009-02-09 17:24 ` Takashi Iwai
2009-02-10 11:34 ` Takashi Iwai
2009-02-10 23:58 ` aeleneski
2009-02-11 6:34 ` Takashi Iwai
2009-02-04 22:42 Andrew Eleneski
2009-02-05 7:15 ` Takashi Iwai
2009-02-05 23:45 ` aeleneski
2009-02-06 8:11 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1234400849.7314.2.camel@hplaptop \
--to=bh@habah.com \
--cc=aeleneski@comcast.net \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.