Re: HP pavilion dv5 1110ew - no hdmi sound

["Bartłomiej Holdenmayer" <bh@habah.com>]

Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
> At Fri, 13 Feb 2009 22:48:26 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:
> > > At Fri, 13 Feb 2009 07:58:44 +0100,
> > > I wrote:
> > > > 
> > > > At Fri, 13 Feb 2009 04:37:54 +0100,
> > > > Bartłomiej Holdenmayer wrote:
> > > > > 
> > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:
> > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,
> > > > > > Bartłomiej Holdenmayer wrote:
> > > > > > > 
> > > > > > > Welcome,
> > > > > > > I have no sound through HDMI.
> > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And
> > > > > > > newest bios F13A. 
> > > > > > > 
> > > > > > > I was googling for a week and only solution i found was to upgrade Alsa
> > > > > > > and Nvidia to the newest version. I did, but i still do not have sound
> > > > > > > over HDMI. In Win$ it is working ok.
> > > > > > > 
> > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863
> > > > > > 
> > > > > > Try the very latest alsa-driver snapshot below:
> > > > > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > > > > 
> > > > > > 
> > > > > > Takashi
> > > > > 
> > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.
> > > > > Still sound does not work over hdmi.
> > > > 
> > > > Well, then the last suspect is BIOS.
> > > 
> > > BTW, the very latest alsa-driver snapshot includes a new feature to
> > > force the codec probing.  Grab the latest one and try probe_mask=0x1ff
> > > option.  You'll have to see some new messages
> > > 	hda_intel: codec_mask forced to 0xff
> > > 
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel@alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > Can You please tell me what exactly should I do?
> 
> Well, just like what I wrote in the above: grab the latest alsa-driver
> snapshot tarball, build it, install it, and add probe_mask=0x1ff
> module option to snd-hda-intel, then load it.  If you've done it
> properly, you see the message like above.  And let's see whether the
> driver can detect more codecs.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I am not sure if do everything properly.

1. I did installation of alsa snap with script
AlsaUpgrade-1.0.x-rev-1.16.sh;

2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
options snd-hda-intel enable_msi=1

into:
options snd-hda-intel enable_msi=1 probe_mask=0x1ff


3. After I restarted alsa with  /etc/init.d/alsasound stop 
and
/etc/init.d/alsasound start

and get message:
Starting sound driver: snd-hda-intel done

Am I doing that properly? What should I do (what command) to see 
hda_intel: codec_mask forced to 0xff


-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel