From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, "Michael Chan" <mchan@broadcom.com>,
"Benjamin Li" <benli@broadcom.com>,
andy@greyhouse.net
Subject: [PATCH 09/14] tg3: Refactor firmware version routines
Date: Wed, 25 Feb 2009 16:26:33 -0800 [thread overview]
Message-ID: <1235616376.16019@xw6200> (raw)
This patch reorganizes the firmware version routines in preparation for
the following patches.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 98 +++++++++++++++++++++++++++++-----------------------
1 files changed, 55 insertions(+), 43 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9453918..2e83755 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11461,6 +11461,31 @@ static int __devinit tg3_fw_img_is_valid(struct tg3 *tp, u32 offset)
return 1;
}
+static void __devinit tg3_read_bc_ver(struct tg3 *tp)
+{
+ u32 offset, start, ver_offset;
+ int i;
+
+ if (tg3_nvram_read(tp, 0xc, &offset) ||
+ tg3_nvram_read(tp, 0x4, &start))
+ return;
+
+ offset = tg3_nvram_logical_addr(tp, offset);
+
+ if (!tg3_fw_img_is_valid(tp, offset) ||
+ tg3_nvram_read(tp, offset + 8, &ver_offset))
+ return;
+
+ offset = offset + ver_offset - start;
+ for (i = 0; i < 16; i += 4) {
+ __be32 v;
+ if (tg3_nvram_read_be32(tp, offset + i, &v))
+ return;
+
+ memcpy(tp->fw_ver + i, &v, sizeof(v));
+ }
+}
+
static void __devinit tg3_read_sb_ver(struct tg3 *tp, u32 val)
{
u32 offset, major, minor, build;
@@ -11506,44 +11531,10 @@ static void __devinit tg3_read_sb_ver(struct tg3 *tp, u32 val)
}
}
-static void __devinit tg3_read_fw_ver(struct tg3 *tp)
+static void __devinit tg3_read_mgmtfw_ver(struct tg3 *tp)
{
u32 val, offset, start;
- u32 ver_offset;
- int i, bcnt;
-
- if (tg3_nvram_read(tp, 0, &val))
- return;
-
- if (val != TG3_EEPROM_MAGIC) {
- if ((val & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW)
- tg3_read_sb_ver(tp, val);
-
- return;
- }
-
- if (tg3_nvram_read(tp, 0xc, &offset) ||
- tg3_nvram_read(tp, 0x4, &start))
- return;
-
- offset = tg3_nvram_logical_addr(tp, offset);
-
- if (!tg3_fw_img_is_valid(tp, offset) ||
- tg3_nvram_read(tp, offset + 8, &ver_offset))
- return;
-
- offset = offset + ver_offset - start;
- for (i = 0; i < 16; i += 4) {
- __be32 v;
- if (tg3_nvram_read_be32(tp, offset + i, &v))
- return;
-
- memcpy(tp->fw_ver + i, &v, 4);
- }
-
- if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
- return;
+ int i, vlen;
for (offset = TG3_NVM_DIR_START;
offset < TG3_NVM_DIR_END;
@@ -11570,10 +11561,10 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
offset += val - start;
- bcnt = strlen(tp->fw_ver);
+ vlen = strlen(tp->fw_ver);
- tp->fw_ver[bcnt++] = ',';
- tp->fw_ver[bcnt++] = ' ';
+ tp->fw_ver[vlen++] = ',';
+ tp->fw_ver[vlen++] = ' ';
for (i = 0; i < 4; i++) {
__be32 v;
@@ -11582,14 +11573,35 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
offset += sizeof(v);
- if (bcnt > TG3_VER_SIZE - sizeof(v)) {
- memcpy(&tp->fw_ver[bcnt], &v, TG3_VER_SIZE - bcnt);
+ if (vlen > TG3_VER_SIZE - sizeof(v)) {
+ memcpy(&tp->fw_ver[vlen], &v, TG3_VER_SIZE - vlen);
break;
}
- memcpy(&tp->fw_ver[bcnt], &v, sizeof(v));
- bcnt += sizeof(v);
+ memcpy(&tp->fw_ver[vlen], &v, sizeof(v));
+ vlen += sizeof(v);
}
+}
+
+static void __devinit tg3_read_fw_ver(struct tg3 *tp)
+{
+ u32 val;
+
+ if (tg3_nvram_read(tp, 0, &val))
+ return;
+
+ if (val == TG3_EEPROM_MAGIC)
+ tg3_read_bc_ver(tp);
+ else if ((val & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW)
+ tg3_read_sb_ver(tp, val);
+ else
+ return;
+
+ if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
+ (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+ return;
+
+ tg3_read_mgmtfw_ver(tp);
tp->fw_ver[TG3_VER_SIZE - 1] = 0;
}
--
1.6.0.6
reply other threads:[~2009-02-26 2:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1235616376.16019@xw6200 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=benli@broadcom.com \
--cc=davem@davemloft.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.