From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>,
x86 maintainers <x86@kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [git-pull -tip V2] x86: cpu architecture debug code
Date: Wed, 11 Mar 2009 18:15:18 +0530 [thread overview]
Message-ID: <1236775518.2836.14.camel@ht.satnam> (raw)
In-Reply-To: <1236772478.2836.12.camel@ht.satnam>
On Wed, 2009-03-11 at 17:24 +0530, Jaswinder Singh Rajput wrote:
> On Tue, 2009-03-10 at 18:45 +0100, Ingo Molnar wrote:
> > * Jaswinder Singh Rajput <jaswinder@kernel.org> wrote:
> >
> > > On Tue, 2009-03-10 at 16:20 +0100, Ingo Molnar wrote:
> > > > * Jaswinder Singh Rajput <jaswinder@kernel.org> wrote:
> > > >
> > > > > +#include <linux/interrupt.h>
> > > > > +#include <linux/compiler.h>
> > > > > +#include <linux/kprobes.h>
> > > > > +#include <linux/signal.h>
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/errno.h>
> > > > > +#include <linux/sched.h>
> > > > > +#include <linux/types.h>
> > > > > +#include <linux/init.h>
> > > > > +#include <linux/smp.h>
> > > > > +#include <linux/slab.h>
> > > > > +#include <linux/percpu.h>
> > > > > +#include <linux/debugfs.h>
> > > > > +#include <linux/seq_file.h>
> > > >
> > > > If you look at arch/x86/mm/fault.c, they are sorted by length,
> > > > and within the same length they are sorted alphabetically.
> > >
> > > Ok fixed, new pull request:
> > >
> > > The following changes since commit 23eeaab0397190b112591dab13d1fb196f099254:
> > > Ingo Molnar (1):
> > > Merge branch 'tracing/ftrace'
> > >
> > > are available in the git repository at:
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tip-cpu.git master
> > >
> > > Jaswinder Singh Rajput (1):
> > > x86: cpu architecture debug code
> > >
> > > arch/x86/Kconfig | 6 +
> > > arch/x86/include/asm/cpu_debug.h | 193 ++++++++++
> > > arch/x86/kernel/cpu/Makefile | 2 +
> > > arch/x86/kernel/cpu/cpu_debug.c | 784 ++++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 985 insertions(+), 0 deletions(-)
> > > create mode 100755 arch/x86/include/asm/cpu_debug.h
> > > create mode 100755 arch/x86/kernel/cpu/cpu_debug.c
> >
> > Thanks - picked it up into tip:x86/debug. (Note that i
> > rearranged the Makefile details a bit so that it does not
> > conflict with tip:perfcounters)
> >
> > Not yet in tip:master, because it triggers this build failure:
> >
> > arch/x86/kernel/cpu/cpu_debug.c: In function ‘print_dt’:
> > arch/x86/kernel/cpu/cpu_debug.c:475: error: implicit declaration of function ‘store_ldt’
>
> The following changes since commit 259ef6fcea4046fe24495b1e3631c1b905c531c1:
> Jaswinder Singh Rajput (1):
> x86: cpu architecture debug code
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tip-cpu.git master
>
> Jaswinder Singh Rajput (1):
> x86: cpu_debug.c remove some dependency
>
> arch/x86/kernel/cpu/cpu_debug.c | 5 +++--
> 1 files changed, 3 insertions(+), 2 deletions(-)
>
> Complete diff:
> diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
> index 0bdf4da..c844262 100755
> --- a/arch/x86/kernel/cpu/cpu_debug.c
> +++ b/arch/x86/kernel/cpu/cpu_debug.c
> @@ -23,6 +23,7 @@
> #include <linux/smp.h>
>
> #include <asm/cpu_debug.h>
> +#include <asm/paravirt.h>
> #include <asm/system.h>
> #include <asm/traps.h>
> #include <asm/apic.h>
> @@ -427,7 +428,7 @@ static void print_tss(void *arg)
> seq_printf(seq, " CS\t: %04x\n", seg);
> asm("movl %%ds,%0" : "=r" (seg));
> seq_printf(seq, " DS\t: %04x\n", seg);
> - seq_printf(seq, " SS\t: %04lx\n", regs->ss);
> + seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xFF);
oops, typo, here is the correct one:
The following changes since commit 259ef6fcea4046fe24495b1e3631c1b905c531c1:
Jaswinder Singh Rajput (1):
x86: cpu architecture debug code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tip-cpu.git master
Jaswinder Singh Rajput (1):
x86: cpu_debug.c remove store_ldt
arch/x86/kernel/cpu/cpu_debug.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Complete diff:
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 0bdf4da..08f55ce 100755
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
@@ -23,6 +23,7 @@
#include <linux/smp.h>
#include <asm/cpu_debug.h>
+#include <asm/paravirt.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/apic.h>
@@ -427,7 +428,7 @@ static void print_tss(void *arg)
seq_printf(seq, " CS\t: %04x\n", seg);
asm("movl %%ds,%0" : "=r" (seg));
seq_printf(seq, " DS\t: %04x\n", seg);
- seq_printf(seq, " SS\t: %04lx\n", regs->ss);
+ seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff);
asm("movl %%es,%0" : "=r" (seg));
seq_printf(seq, " ES\t: %04x\n", seg);
asm("movl %%fs,%0" : "=r" (seg));
@@ -472,7 +473,7 @@ static void print_dt(void *seq)
print_desc_ptr("GDT", seq, dt);
/* LDT */
- store_ldt(ldt);
+ asm volatile("sldt %0" : "=m" (ldt));
seq_printf(seq, " LDT\t: %016lx\n", ldt);
/* TR */
next prev parent reply other threads:[~2009-03-11 12:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-10 11:23 [git-pull -tip V2] x86: cpu architecture debug code Jaswinder Singh Rajput
2009-03-10 12:28 ` Ingo Molnar
2009-03-10 15:09 ` Jaswinder Singh Rajput
2009-03-10 15:20 ` Ingo Molnar
2009-03-10 16:09 ` Jaswinder Singh Rajput
2009-03-10 17:45 ` Ingo Molnar
2009-03-10 23:55 ` Jaswinder Singh Rajput
2009-03-11 10:53 ` Ingo Molnar
2009-03-11 11:25 ` Jaswinder Singh Rajput
2009-03-11 11:34 ` Ingo Molnar
2009-03-13 7:34 ` Jeremy Fitzhardinge
2009-03-13 8:07 ` Jaswinder Singh Rajput
2009-03-11 11:54 ` Jaswinder Singh Rajput
2009-03-11 12:45 ` Jaswinder Singh Rajput [this message]
2009-03-11 12:50 ` Ingo Molnar
2009-03-11 13:13 ` Ingo Molnar
2009-03-11 13:43 ` Jaswinder Singh Rajput
2009-03-11 13:48 ` Ingo Molnar
2009-03-13 7:37 ` Jeremy Fitzhardinge
2009-03-10 17:48 ` [tip:x86/debug] " Jaswinder Singh Rajput
2009-03-10 19:53 ` [git-pull -tip V2] " Valdis.Kletnieks
2009-03-10 22:00 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236775518.2836.14.camel@ht.satnam \
--to=jaswinder@kernel.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.