All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: bzolnier@gmail.com, linux-kernel@vger.kernel.org,
	axboe@kernel.dk, linux-ide@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions
Date: Wed, 25 Mar 2009 23:17:50 +0900	[thread overview]
Message-ID: <1237990673-8358-8-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1237990673-8358-1-git-send-email-tj@kernel.org>

Impact: cleanup

Byte size is what most issue functions deal with, make
idetape_queue_rw_tail() and its wrappers take byte size instead of
sector counts.  idetape_chrdev_read() and write() functions are
converted to use tape->buffer_size instead of ctl from tape->cap.

This cleans up code a little bit and will ease the next r/w
reimplementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |   45 ++++++++++++++++++++-------------------------
 1 files changed, 20 insertions(+), 25 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index c013954..5fc3282 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	size_t size = blocks * tape->blk_size;
 	struct request *rq;
 	int ret;
 
 	debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
 	BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
+	BUG_ON(size < 0 || size % tape->blk_size);
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
@@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
 }
 
 /* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size)
 {
 	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size);
 }
 
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int blocks;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
@@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 		return;
 	}
 	if (tape->buf) {
-		blocks = tape->valid / tape->blk_size;
-		if (tape->valid % tape->blk_size) {
-			blocks++;
-			memset(tape->buf + tape->valid, 0,
-			       tape->blk_size - tape->valid % tape->blk_size);
-		}
-		(void) idetape_add_chrdev_write_request(drive, blocks);
-	}
-	if (tape->buf != NULL) {
+		size_t aligned = roundup(tape->valid, tape->blk_size);
+
+		memset(tape->cur + tape->valid, 0, aligned - tape->valid);
+		idetape_add_chrdev_write_request(drive, aligned);
 		kfree(tape->buf);
 		tape->buf = NULL;
 	}
@@ -1034,9 +1028,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir)
 }
 
 /* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size)
 {
-	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
+	debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size);
 
 	/* If we are at a filemark, return a read length of 0 */
 	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
@@ -1044,7 +1038,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 
 	idetape_init_rw(drive, IDETAPE_DIR_READ);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size);
 }
 
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
@@ -1056,8 +1050,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 	while (bcount) {
 		unsigned int count = min(tape->buffer_size, bcount);
 
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
-				      count / tape->blk_size);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
 		bcount -= count;
 	}
 }
@@ -1189,7 +1182,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	ide_drive_t *drive = tape->drive;
 	ssize_t bytes_read, temp, actually_read = 0, rc;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
 
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
@@ -1214,7 +1206,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		tape->valid -= actually_read;
 	}
 	while (count >= tape->buffer_size) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
+		bytes_read = idetape_add_chrdev_read_request(drive,
+							     tape->buffer_size);
 		if (bytes_read <= 0)
 			goto finish;
 		if (copy_to_user(buf, tape->cur, bytes_read))
@@ -1224,7 +1217,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		actually_read += bytes_read;
 	}
 	if (count) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
+		bytes_read = idetape_add_chrdev_read_request(drive,
+							     tape->buffer_size);
 		if (bytes_read <= 0)
 			goto finish;
 		temp = min((unsigned long)count, (unsigned long)bytes_read);
@@ -1252,7 +1246,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	ide_drive_t *drive = tape->drive;
 	ssize_t actually_written = 0;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
 	int rc;
 
 	/* The drive is write protected. */
@@ -1280,7 +1273,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 
 		if (tape->valid == tape->buffer_size) {
 			ssize_t retval;
-			retval = idetape_add_chrdev_write_request(drive, ctl);
+			retval = idetape_add_chrdev_write_request(drive,
+							tape->buffer_size);
 			if (retval <= 0)
 				return (retval);
 		}
@@ -1291,7 +1285,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 			ret = -EFAULT;
 		buf += tape->buffer_size;
 		count -= tape->buffer_size;
-		retval = idetape_add_chrdev_write_request(drive, ctl);
+		retval = idetape_add_chrdev_write_request(drive,
+							  tape->buffer_size);
 		actually_written += tape->buffer_size;
 		if (retval <= 0)
 			return (retval);
-- 
1.6.0.2


  parent reply	other threads:[~2009-03-25 14:18 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-25 14:17 [RFC PATCHSET pata-2.6] ide: clean up ide-tape Tejun Heo
2009-03-25 14:17 ` [PATCH 01/10] ide-atapi: allow ->pc_callback() to change rq->data_len Tejun Heo
2009-03-25 14:17 ` [PATCH 02/10] ide-tape: use single continuous buffer Tejun Heo
2009-03-25 16:04   ` Grant Grundler
2009-03-25 16:04     ` Grant Grundler
2009-03-25 16:13     ` Tejun Heo
2009-03-25 16:38       ` Borislav Petkov
2009-03-25 14:17 ` [PATCH 03/10] ide-tape-convert-to-bio Tejun Heo
2009-03-25 14:24   ` [PATCH 03/10 REPOST] ide-tape: use bio to carry data area Tejun Heo
2009-03-25 14:17 ` [PATCH 04/10] ide-tape: use standard data transfer mechanism Tejun Heo
2009-03-25 15:12   ` Borislav Petkov
2009-03-25 15:20     ` Borislav Petkov
2009-03-25 14:17 ` [PATCH 05/10] ide-tape: kill idetape_bh Tejun Heo
2009-03-25 14:17 ` [PATCH 06/10] ide-tape: unify r/w init paths Tejun Heo
2009-03-25 14:17 ` Tejun Heo [this message]
2009-03-25 14:17 ` [PATCH 08/10] ide-tape: simplify read/write functions Tejun Heo
2009-03-25 14:17 ` [PATCH 09/10] ide-atapi: kill unused fields and callbacks Tejun Heo
2009-03-25 14:17 ` [PATCH 10/10] ide: drop rq->data handling from ide_map_sg() Tejun Heo
2009-03-31  7:48 ` [RFC PATCHSET pata-2.6] ide: clean up ide-tape Borislav Petkov
  -- strict thread matches above, loose matches on Subject: below --
2009-04-18 23:58 [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2 Tejun Heo
2009-04-18 23:58 ` [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions Tejun Heo
2009-04-20 13:39   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1237990673-8358-8-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.