From: Andrew Reay <certain@tpg.com.au>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Compro T750F not working yet...BUG: unable to handle kernel paging request at fffffff4
Date: Sat, 11 Apr 2009 13:26:19 +1000 [thread overview]
Message-ID: <1239420379.7179.16.camel@desktop> (raw)
[-- Attachment #1: Type: text/plain, Size: 6962 bytes --]
Hi Everyone,
I have a Compro VideoMate T750F which is not working under Ubuntu 9.04
BETA. I get the same result as davor emard <davoremard <at> gmail.com>
posted 2009-01-19 11:45:46 GMT.
The relevant part of the dmesg below, perhaps the 'BUG: unable to handle
kernel paging request at fffffff4' part is part of the problem?
I have pasted the attached xc3028-v27.fw created in Ubuntu 8.10
into /lib/firmware but still no go.
Thanks,
Andrew
[ 10.377283] Linux video capture interface: v2.00
[ 10.516423] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 10.517059] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 10.517072] saa7134 0000:04:08.0: PCI INT A -> Link[APC1] -> GSI 16
(level, low) -> IRQ 16
[ 10.517079] saa7133[0]: found at 0000:04:08.0, rev: 209, irq: 16,
latency: 32, mmio: 0xfdbfe000
[ 10.517085] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate
T750 [card=139,autodetected]
[ 10.517237] saa7133[0]: board init: gpio is 84bf00
[ 10.517246] saa7133[0]: Oops: IR config error [card=139]
[ 10.580657] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 10.580663] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23
(level, low) -> IRQ 23
[ 10.580723] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 10.668027] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43
a9 1c 55 d2 b2 92
[ 10.668036] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 10.668045] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff
00 87 ff ff ff ff
[ 10.668053] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668061] saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2
ff 01 c6 ff 05 ff
[ 10.668069] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff cb
[ 10.668077] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668085] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668093] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668101] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668108] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668116] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668124] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668132] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668140] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.668148] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 10.685023] tuner' 2-0062: chip found @ 0xc4 (saa7133[0])
[ 10.692029] tuner' 2-0063: chip found @ 0xc6 (saa7133[0])
[ 10.700028] tuner' 2-0068: chip found @ 0xd0 (saa7133[0])
[ 10.721926] xc2028 2-0062: creating new instance
[ 10.721930] xc2028 2-0062: type set to XCeive xc2028/xc3028 tuner
[ 10.721944] BUG: unable to handle kernel paging request at fffffff4
[ 10.721949] IP: [<f7f822c0>] saa7134_board_init2+0x140/0x710
[saa7134]
[ 10.721963] *pde = 007bd067 *pte = 00000000
[ 10.721967] Oops: 0000 [#1] SMP
[ 10.721970] last sysfs file: /sys/module/videodev/initstate
[ 10.721973] Dumping ftrace buffer:
[ 10.721976] (ftrace buffer empty)
[ 10.721978] Modules linked in: tuner_xc2028 tuner snd_hda_intel(+)
snd_pcm_oss snd_mixer_oss snd_pcm saa7134(+) snd_seq_dummy snd_seq_oss
snd_seq_midi snd_rawmidi ir_common snd_seq_midi_event snd_seq videodev
v4l1_compat compat_ioctl32 snd_timer snd_seq_device psmouse ppdev
v4l2_common videobuf_dma_sg serio_raw pcspkr snd videobuf_core soundcore
tveeprom k8temp snd_page_alloc i2c_nforce2 parport_pc parport 8139too
8139cp mii floppy ohci1394 ieee1394 fbcon tileblit font bitblit
softcursor
[ 10.722007]
[ 10.722011] Pid: 1531, comm: modprobe Not tainted (2.6.28-11-generic
#37-Ubuntu) System Product Name
[ 10.722014] EIP: 0060:[<f7f822c0>] EFLAGS: 00010286 CPU: 1
[ 10.722022] EIP is at saa7134_board_init2+0x140/0x710 [saa7134]
[ 10.722025] EAX: 00000000 EBX: 00000000 ECX: f6255c3c EDX: 00000000
[ 10.722027] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f6255c58
[ 10.722029] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 10.722032] Process modprobe (pid: 1531, ti=f6254000 task=f60c25b0
task.ti=f6254000)
[ 10.722034] Stack:
[ 10.722035] 00000303 f6255c5c f6255c5c f61b6000 f6fddc00 f61b6000
f6255cd4 c014ad77
[ 10.722041] 000000d0 f7f84889 656e7574 00000072 000000f0 f61b64b0
00000002 f61b6140
[ 10.722047] f7f8e510 f61b64b0 f6255cd4 f7f8494d 65626f72 642d7000
006d6561 000005fb
[ 10.722053] Call Trace:
[ 10.722055] [<c014ad77>] ? request_module+0x97/0xf0
[ 10.722061] [<f7f84889>] ? saa7134_i2c_eeprom+0xe9/0x110 [saa7134]
[ 10.722072] [<f7f8494d>] ? saa7134_i2c_register+0x9d/0x120 [saa7134]
[ 10.722082] [<f7f8d67c>] ? saa7134_initdev+0x3cc/0x8d5 [saa7134]
[ 10.722094] [<c02dc1be>] ? pci_device_probe+0x5e/0x80
[ 10.722100] [<c034f124>] ? really_probe+0x54/0x180
[ 10.722104] [<c02db9ee>] ? pci_match_device+0xbe/0xd0
[ 10.722110] [<c034f28e>] ? driver_probe_device+0x3e/0x50
[ 10.722113] [<c034f329>] ? __driver_attach+0x89/0x90
[ 10.722117] [<c034ea63>] ? bus_for_each_dev+0x53/0x80
[ 10.722121] [<c02dc100>] ? pci_device_remove+0x0/0x40
[ 10.722125] [<c034efe9>] ? driver_attach+0x19/0x20
[ 10.722128] [<c034f2a0>] ? __driver_attach+0x0/0x90
[ 10.722131] [<c034e43f>] ? bus_add_driver+0x1af/0x230
[ 10.722135] [<c02dc100>] ? pci_device_remove+0x0/0x40
[ 10.722139] [<c034f4c9>] ? driver_register+0x69/0x140
[ 10.722144] [<f7f84240>] ? saa7134_init+0x0/0x60 [saa7134]
[ 10.722154] [<c02dc41a>] ? __pci_register_driver+0x4a/0x90
[ 10.722158] [<f7f84240>] ? saa7134_init+0x0/0x60 [saa7134]
[ 10.722167] [<f7f84292>] ? saa7134_init+0x52/0x60 [saa7134]
[ 10.722177] [<c010111e>] ? _stext+0x2e/0x170
[ 10.722180] [<c020be75>] ? sysfs_addrm_finish+0x15/0xf0
[ 10.722185] [<c020b643>] ? sysfs_add_one+0x13/0x50
[ 10.722188] [<c020b6bf>] ? sysfs_addrm_start+0x3f/0xa0
[ 10.722191] [<c01a8fac>] ? __vunmap+0x9c/0xe0
[ 10.722196] [<c01a8fac>] ? __vunmap+0x9c/0xe0
[ 10.722199] [<c0127c7d>] ? update_curr+0x8d/0x1e0
[ 10.722203] [<c012c6dc>] ? enqueue_entity+0x13c/0x360
[ 10.722207] [<c0131bae>] ? resched_task+0x1e/0x70
[ 10.722210] [<c0133b24>] ? try_to_wake_up+0x104/0x290
[ 10.722215] [<c0163f58>] ? sys_init_module+0x88/0x1b0
[ 10.722220] [<c0103f6b>] ? sysenter_do_call+0x12/0x2f
[ 10.722223] Code: 30 e8 57 c8 8b 55 90 8b 82 2c 01 00 00 89 5c 24 04
c7 04 24 38 f4 f8 f7 89 44 24 08 e8 13 e8 57 c8 66 90 8b 45 90 e8 40 fd
ff ff <8b> 5d f4 31 c0 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8b 4d 90 8b 71
[ 10.722254] EIP: [<f7f822c0>] saa7134_board_init2+0x140/0x710
[saa7134] SS:ESP 0068:f6255c58
[ 10.722265] ---[ end trace 11de26a2ee66d7a6 ]---
[-- Attachment #2: xc3028-v27.fw --]
[-- Type: application/octet-stream, Size: 66220 bytes --]
[-- Attachment #3: Type: text/plain, Size: 228 bytes --]
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2009-04-11 3:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-11 3:26 Andrew Reay [this message]
2009-04-16 13:41 ` [linux-dvb] Compro T750F not working yet...BUG: unable to handle kernel paging request at fffffff4 td9678td
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1239420379.7179.16.camel@desktop \
--to=certain@tpg.com.au \
--cc=linux-dvb@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.