From: Lin Ming <ming.m.lin@intel.com>
To: Ed Tomlinson <edt@aei.ca>
Cc: Zhang Rui <rui.zhang@intel.com>,
LKML <linux-kernel@vger.kernel.org>, Avi Kivity <avi@redhat.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>
Subject: Re: 2.6.30-rc1 A few issues and a stall
Date: Mon, 13 Apr 2009 10:50:31 +0800 [thread overview]
Message-ID: <1239591031.4445.4091.camel@minggr.sh.intel.com> (raw)
In-Reply-To: <1239588307.7661.209.camel@rzhang-dt>
On Mon, 2009-04-13 at 10:05 +0800, Zhang Rui wrote:
> On Sun, 2009-04-12 at 23:24 +0800, Ed Tomlinson wrote:
> > Hi,
> >
> > I got tired of building out of tree DRM drivers so decided to try 2.6.30-rc1. For simple tasks
> > it works fine, for slightly more complex ones it is not quite as good...
> >
> > Here is an example. I normally start a kvm session with the commands below:
> >
> > ed@grover ~/vm $ sudo modprobe tun
> > ed@grover ~/vm $ sudo brctl addbr br0
> > ed@grover ~/vm $ sudo ifconfig br0 192.168.100.254 netmask 255.255.255.0 up
> > ed@grover ~/vm $ sudo tunctl -b -u ed -t qtap0
> > qtap0
> > ed@grover ~/vm $ sudo brctl addif br0 qtap0
> > ed@grover ~/vm $ sudo ifconfig qtap0 up 0.0.0.0 promisc
> > ed@grover ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> > iptables v1.4.2: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
> > Perhaps iptables or your kernel needs to be upgraded.
> >
> > Issue 1 - I need to manually modprobe be get iptables to work. This exact procedure worked in 2.6.29.
> >
> > ed@grover ~/vm $ sudo modprobe nf_nat
> > ed@grover ~/vm $ sudo modprobe ipt_MASQUERADE
> > ed@grover ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> >
> > Once the above networking stuff is setup I start kvm with the command below
> >
> > QEMU_AUDIO_DRV=alsa kvm -m 1024 -cdrom /mnt/sdc4/divx/archlinux-2009.02-ftp-i686.iso -boot c -smp 3 -usb -usbdevice tablet -vga std -drive file=arch.img -net nic,macaddr=52:54:00:12:34:23 -net tap,ifname=qtap0,script=no -soundhw all -mem-path /hugepages
> >
> > which works and the kvm session boots just fine.
> >
> > Issue 2. When I attempt to ping outside the kvm session the pc (not just the kvm session) hangs.
> > Its impossible to kill the kvm session and there are numerious info messages from RCU (tree RCU enabled)
> > about stalls.
> >
> > Issue 3. ACPI is having fun during startup. This does not seem to cause problems later but is
> > noisy and probably should be fixed before .30's release.
> >
> this is a duplicate of bug
> http://bugzilla.kernel.org/show_bug.cgi?id=13036
> please try the patch in comment #6 there and see if it helps.
please also have a try the patch in comment #10 (don't apply the patch
in comment #6).
Thanks.
>
> thanks,
> rui
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-04-13 3:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-12 15:24 2.6.30-rc1 A few issues and a stall Ed Tomlinson
2009-04-13 2:05 ` Zhang Rui
2009-04-13 2:50 ` Lin Ming [this message]
2009-04-13 22:22 ` Ed Tomlinson
2009-04-14 10:03 ` Avi Kivity
2009-04-14 12:32 ` Ed Tomlinson
2009-04-14 12:39 ` Avi Kivity
2009-04-14 22:03 ` Ed Tomlinson
2009-04-14 22:54 ` [Bridge] 2.6.30-rc1 A few issues and a stall (nmi_watchdog traceback) Ed Tomlinson
2009-04-14 22:54 ` Ed Tomlinson
2009-04-14 23:09 ` [Bridge] " Stephen Hemminger
2009-04-14 23:09 ` Stephen Hemminger
2009-04-14 23:54 ` [Bridge] " Ed Tomlinson
2009-04-14 23:54 ` Ed Tomlinson
2009-04-15 1:27 ` [Bridge] " Ed Tomlinson
2009-04-15 1:27 ` Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1239591031.4445.4091.camel@minggr.sh.intel.com \
--to=ming.m.lin@intel.com \
--cc=avi@redhat.com \
--cc=edt@aei.ca \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.