From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philippe Gerum In-Reply-To: References: Content-Type: text/plain Date: Sun, 19 Apr 2009 23:11:19 +0200 Message-Id: <1240175479.26554.209.camel@domain.hid> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Xenomai v2.5-rc1 feedback List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: vikesh rambaran Cc: xenomai-help On Sun, 2009-04-19 at 20:52 +0200, vikesh rambaran wrote: > hi > > Thanx for v2.5-rc1. Here are some minor observations > > 1. The prepare-kernel script requires --arch=x86 for an x86 32 bit > platform. > > --arch=i386 as per README.INSTALL section 2.1 does not seem to be > allowed anymore > > (README.INSTALL updates required ?) Yes, fairly outdated now. > > 2. With Xenomai v2.4.x echoing the xenomai group id > to /sys/module/xeno_nucleus/parameters/xenomai_gid > allowed a Xenomai application to be run without having to type 'sudo'. > Does not work with v2.5-rc1. > Get the following message : > > Xenomai: open: Permission denied > Xenomai: mmap(local sem heap): Permission denied > > [Application runs normally if sudo is used] > > Has this feature been removed ? > > 3. When running the latency test in a console window within X and the > window is maximised/minimized > the following message appears : > > Not SIGSHADOW ! > > Latency test then continues to run normally > > [This was seen with the 2.6.29.1 build. Will have to confirm if it > appears with the 2.6.28.9 build] > > Hope this helps > Vicki > > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help -- Philippe.