All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: axboe@kernel.dk, linux-kernel@vger.kernel.org,
	joerg@dorchain.net, geert@linux-m68k.org, donari75@gmail.com,
	davem@davemloft.net, jdike@linux.intel.com,
	benh@kernel.crashing.org, Laurent@lvivier.info
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 09/12] swim3: clean up request completion paths
Date: Thu, 23 Apr 2009 21:25:50 +0900	[thread overview]
Message-ID: <1240489553-15724-10-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1240489553-15724-1-git-send-email-tj@kernel.org>

swim3 curiously tries to update request parameters before calling
__blk_end_request() when __blk_end_request() will do it anyway, and it
updates request for partial completion manually instead of using
blk_update_request().  Also, it does some spurious checks on rq such
as testing whether rq->sector is negative or current_nr_sectors is
zero right after fetching.

Drop unnecessary stuff and use standard block layer mechanisms.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/block/swim3.c |   31 +++++--------------------------
 1 files changed, 5 insertions(+), 26 deletions(-)

diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 5904f7b..4248559 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -319,14 +319,10 @@ static void start_request(struct floppy_state *fs)
 		       req->errors, req->current_nr_sectors);
 #endif
 
-		if (req->sector < 0 || req->sector >= fs->total_secs) {
+		if (req->sector >= fs->total_secs) {
 			__blk_end_request_cur(req, -EIO);
 			continue;
 		}
-		if (req->current_nr_sectors == 0) {
-			__blk_end_request_cur(req, 0);
-			continue;
-		}
 		if (fs->ejected) {
 			__blk_end_request_cur(req, -EIO);
 			continue;
@@ -593,8 +589,6 @@ static void xfer_timeout(unsigned long data)
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
 	struct dbdma_regs __iomem *dr = fs->dma;
-	struct dbdma_cmd *cp = fs->dma_cmd;
-	unsigned long s;
 	int n;
 
 	fs->timeout_pending = 0;
@@ -605,14 +599,6 @@ static void xfer_timeout(unsigned long data)
 	out_8(&sw->intr_enable, 0);
 	out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
 	out_8(&sw->select, RELAX);
-	if (rq_data_dir(fd_req) == WRITE)
-		++cp;
-	if (ld_le16(&cp->xfer_status) != 0)
-		s = fs->scount - ((ld_le16(&cp->res_count) + 511) >> 9);
-	else
-		s = 0;
-	fd_req->sector += s;
-	fd_req->current_nr_sectors -= s;
 	printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
 	       (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector);
 	__blk_end_request_cur(fd_req, -EIO);
@@ -719,9 +705,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 		if (intr & ERROR_INTR) {
 			n = fs->scount - 1 - resid / 512;
 			if (n > 0) {
-				fd_req->sector += n;
-				fd_req->current_nr_sectors -= n;
-				fd_req->buffer += n * 512;
+				blk_update_request(fd_req, 0, n << 9);
 				fs->req_sector += n;
 			}
 			if (fs->retries < 5) {
@@ -745,13 +729,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 				start_request(fs);
 				break;
 			}
-			fd_req->sector += fs->scount;
-			fd_req->current_nr_sectors -= fs->scount;
-			fd_req->buffer += fs->scount * 512;
-			if (fd_req->current_nr_sectors <= 0) {
-				__blk_end_request_cur(fd_req, 0);
-				fs->state = idle;
-			} else {
+			if (__blk_end_request(fd_req, 0, fs->scount << 9)) {
 				fs->req_sector += fs->scount;
 				if (fs->req_sector > fs->secpertrack) {
 					fs->req_sector -= fs->secpertrack;
@@ -761,7 +739,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 					}
 				}
 				act(fs);
-			}
+			} else
+				fs->state = idle;
 		}
 		if (fs->state == idle)
 			start_request(fs);
-- 
1.6.0.2


  parent reply	other threads:[~2009-04-23 12:30 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-23 12:25 [RFC PATCHSET linux-2.6-block#for-2.6.31] block: lld cleanup patches Tejun Heo
2009-04-23 12:25 ` [PATCH 01/12] block-update-end_cur Tejun Heo
2009-04-23 12:25 ` [PATCH 02/12] block: don't init rq fields unnecessarily Tejun Heo
2009-04-23 12:25 ` [PATCH 03/12] amiflop,ataflop,xd,mg_disk: clean up unnecessary stuff from block drivers Tejun Heo
2009-04-23 12:25 ` [PATCH 04/12] ps3disk: simplify request completion Tejun Heo
2009-04-23 12:25 ` [PATCH 05/12] sunvdc: kill vdc_end_request() Tejun Heo
2009-04-23 13:33   ` David Miller
2009-04-28  2:54     ` Tejun Heo
2009-04-23 12:25 ` [PATCH 06/12] ubd: cleanup completion path Tejun Heo
2009-04-23 12:25 ` [PATCH 07/12] ubd: drop unnecessary rq->sector manipulation Tejun Heo
2009-04-23 12:25 ` [PATCH 08/12] hd: clean up request completion paths Tejun Heo
2009-04-23 12:25 ` Tejun Heo [this message]
2009-04-23 12:25 ` [PATCH 10/12] swim: " Tejun Heo
2009-04-23 12:25 ` [PATCH 11/12] mg_disk: fold mg_disk.h into mg_disk.c Tejun Heo
2009-04-23 12:25 ` [PATCH 12/12] mg_disk: clean up request completion paths Tejun Heo
2009-04-24 19:41 ` [RFC PATCHSET linux-2.6-block#for-2.6.31] block: lld cleanup patches Bartlomiej Zolnierkiewicz
2009-04-28  3:44   ` Tejun Heo
2009-04-28 18:38     ` Bartlomiej Zolnierkiewicz
2009-04-28 22:36       ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1240489553-15724-10-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=Laurent@lvivier.info \
    --cc=axboe@kernel.dk \
    --cc=benh@kernel.crashing.org \
    --cc=davem@davemloft.net \
    --cc=donari75@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=jdike@linux.intel.com \
    --cc=joerg@dorchain.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.